Urban Development Authority Tender

CODE04 - Removing & Resetting Removing and resetting of precast kerb stones fixed with CM 1:3 fixed and finished in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) (PWD UNI SR 2023-24 vol 3 item no 10.17 page no 95)

CODE05 - Wet Mix Macadam (Plant Mix Method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. (PWD UNI SR 2023-24 vol 3 item no 4.17 page no 26)

CODE06 - Precast Cement Concrete Interlocking Blocks. Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid in required pattern and including over 30mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-incharge. (WMM/WBM Base to be paid separately if necessary as per relevant technical specification) (PWD UNI SR 2023-24 vol 3 item no6.8.1page no 51)

CODE07 - Kerb Stones Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) 300 x 300 x 100 mm size.(PWD UNI SR 2023-24vol 3 item no 3.42.5 page no 74)

CODE08 - Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge. (PWD UNI SR 2023-24 vol 2 item no8.54.2 page no 50)

CODE09 - Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD UNI SR 2023-24 vol 2 item no 8.4 page no 48)

CODE10 - Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.In all kinds of soils Depth upto 1.5 m.(PWD UNI SR 2023-24 vol 1 item no 1.4.1 page no 5)

CODE11 - Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications.(PWD UNI SR 2023-24 vol 1 item no 1.23 page no 54 )

CODE12 - Providing and laying 100mm thick pre-cast cover slabs over Road side drains / utility ducts / Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 550 @ 6kg/ m2, slabs jointed in CM 1:3 proportion and nicely finished Including providing holes in the Cover slabs wherever necessary for easy drainage of surface water including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete.(PWD UNI SR 2023-24 vol 2 item no 17.14 page no 177 )

CODE13 - uPVC Pipes 100 mm nominal dia.(PWD UNI SR 2023-24 vol 2 item no 990 page no A-42 )

CODE14 - RCC NP 2 1200mm dia. (PWD UNI SR 2023-24 vol 1 item no 48 page no A-39 )

CODE15 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding (PWD UNI SR 2023-24 vol 2 item no 11.34 page no 86 )

CODE16 - Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD UNI SR 2023-24 vol 1 item no 2.2.1 page no 15 )

CODE17 - Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) Light shade pigment using white cement (PWD UNI SR 2023-24 vol 2 item no 9.6.1 page no 59 )

CODE18 - Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr at Lumen Maintenance of 70 percent, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP66 optical and electrical compartment and impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 and LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency 1301m/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI and any Government certified agency and Design and Development facility certified by ISO 9001 2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer and Cree/Nichia/Lumileds/Osram make LED Source. LED Streetlight 70W (PWD UNI ele SR 2023-24 vol 6 item no 11.8.3 page no 46 of 105)

CODE19 - Supplying and Fixing of.mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / wall using suitable clamps, bolts, and nuts and wiring using suitable capacity wires. Using 25mm dia G.I.Pipe (PWD UNI ele SR 2023-24 vol 6 item no 13.1.1 page no 56 of 105)

CODE20 - Fixing charges of post top/ Gate/ Garden fitting /LED on the existing CI/ GI or any other pipe using required size of reducer, wiring using suitable wires (PWD UNI ele SR 2023-24vol 6 item no 13.6 page no 56 of 105)

CODE21 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:201. 2.5 mm2 (PWD UNI ele SR 2023-24 vol 6 item no 2.3.3 page no 56 of 105)

CODE22 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) (PWD UNI ele SR 2023-24 vol 6 item no 32.05 page no 13 of 81)

CODE23 - Supplying, laying and jointing HDPE pipes of specified garde and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding , giving hydraulic test as per relvant ISS with all lead and lifts including encasing the pipe alround to a dept of not less than 15cms. With soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherver necessary like saddle tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for producing water for testing) etc. Note:Upto 110mm dia coil shall be used. FGrade PE80 PN6.0

CODE24 - Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of soil not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work. (PWD UNI SR 2023-24 vol 1 item no 1.1 page no 5)

CODE25 - Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m. (PWD UNI SR 2023-24 vol 1 item no 1.4.1 page no 5)

CODE26 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates (PWD UNI SR 2023-24 vol 1 item no2.1.3 page no 15)

CODE27 - Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD UNI SR 2023-24 vol 1 item no2.2.1 page no 15)

CODE28 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Canal & Allied Works ( PWD UNI SR 2023-24 vol 1 it no2.11f page no 18)

CODE29 - LLDPE Wave Slide: is made up of M.S A-class structure materials. The sliding portion is made up of LLDPE Virgin plastic. The Structure i.e., the ladder is made up of (main footings) 25mm NB and steps of 20mm NB M.S A- class pipes. The railings of the ladder are made up of 20mm NB M.S A- class pipes. The height of the platform is 5’ and the sliding span is 8’.5” or Equivalent Standard Size The above equipment is powder coated in multi-color with foundation extension Quality of Product Should be as per ISO 9001:2015 Standard Safe area is 20’ X 4’. (Approved Data Rate)

CODE30 - Swing 2 Seater Size: 250 X 150 X 200 cms/Equivalent Standard Size All pipes are made up of 90mm GI pipes, Seats are made of rubber and chain is made of GI with rubber coated. Quality of Product Should be as per ISO 9001:2015 Standard (Approved Data Rate)

CODE31 - See Saw 4 Seater: Made up of GI structure materials. The main beam is made up of 114mm OD GI pipes. The Structure i.e., the legs are made up of 114mm OD pipes housing a heavy duty metal bush of pivot type Mechanism. Handles are made up of 15mm OD pipe. The seats are made out of LLDPE Cycle Seat 2 Nos. Height of the equipment is 18” (After installation). Length of the Main Beam 6’ or Equivalent Standard Size The above equipment is powder coated with foundation extension. Quality of Product Should be as per ISO 9001:2015 Standard Safe area is 9’ X 5’. (Approved Data Rate)

CODE32 - Merry Go Round: Made up of Galvanized steel round platform which is a thickness of 2.5 mm. It is of Dia 1.5 m. It has 4 inverted "L" shaped handrails which is made of Galvanized steel and Seat is attached to each hand rails, seat is made HDPE sheets. All the 4 handrails are connected to the Centre with pipe to main Pipe which is also made of Galvanized steel and of Dia 114 mm and height 880 mm. or Equivalent Standard Size The above equipment is powder coated with foundation extension. Quality of Product Should be as per ISO 9001:2015 Standard Safe area 10’ X 10’ (Approved Data Rate)

CODE33 - Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. (PWD UNI SR 2023-24 vol 1 item no 1.8 page no 7)

CODE34 - Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) 300 x 300 x 100 mm Size (PWD UNI SR 2023-24 vol 3 item no 8.42.5 page no 74)

CODE35 - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.(PWD UNI SR 2023-24 vol 3 item no 4.17 page no 26)

CODE36 - Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid in required pattern and including over 30mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in charge. (WMM/WBM Base to be paid separately if necessary as per relevant technical specification) (PWD UNI SR 2023-24 vol 3 item no 6.8.1 page no 51)

CODE37 - Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD UNI SR 2023-24 vol 2 item no 8.4 page no 48)

CODE38 - Sand River sand. (PWD UNI SR 2021-22 vol 1Sl. no73 page no A41)