Tool Room And Training Centre Tender
... More
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 12,25,000Document Cost
Refer DocumentsTender Fee
₹ 7,500
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
GTTC/2024-25/BD/WORK_INDENT13Bid Award Id
ViewTender No
GTTC/2024-25/BD/WORK_INDENT13Tender Authority
Tool Room And Training Centre ViewPurchaser Address
-Website
http://kppp.karnataka.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
I292 - Supplying and fixing of I Osocket, face plate with back box. Single I O
60
514
30870
... More
I528 - Providing and fixing water closet squatting pan Indian type W.C. pan with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device handle lever conforming to IS : 7231, with all fittings and fixtures
complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
20
5179
103589.6
... More
I155 - IRONITE FLOORING Cement Concrete Flooring in rich Ratio normally 100 to 150mm thick with nominal reinforcrment.The top layer of 10 12mm thickness is laid with iron chips or granules mixed with the concrete to make the top layer more HardGround Floor
1315.927
1100
1447519.7
... More
I451 - Supplying and fixing Moulded Case Circuit Breaker MCCB over the existing wood panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS 13947. Icu is equal to 100 percent lcs . In 4P MCCB, all Poles should have protection for Short Cicrcuit Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non Priority loads must be available in the MCCB. MCCB shall be provided with double insulation insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open . Multi pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. 400 A 36 kA
1
29626
29626.8
... More
I373 - Supplying, fixing and wiring 3 Phase Digital Ammeter Voltmeter
2
1496
2992.5
... More
I363 - Supplying and fixing Moulded Case Circuit Breaker MCCB over the existing wood panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS 13947. Icu is equal to 100 percent lcs . In 4P MCCB, all Poles should have protection for Short Cicrcuit Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non Priority loads must be available in the MCCB. MCCB shall be provided with double insulation insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open . Multi pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. 125 A 25 kA
2
10858
21716.1
... More
I171 - Providing and Fixing 12mm thick froasted Toughened glass patitions. First Floor
86.4505
2100
181546.05
... More
I178 - Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2x1.5Sqmm Phase and Neutral and 1x1.0 sqmm Earth wire FRLS multi strand PVC insulated copper wire confirming to IS 694: and latest amendments without control switch shall be fixed on the existing plastic sheet gang box, the other end of the wires shall be terminated with sufficient loose length in a wood PVC round block. complete for each outlet. Three outlet in a row above 6 mts upto 10 mts from the tapping point to outlet via switches
22
1038
22845.9
... More
I372 - Supplying, fixing and wiring rotary selector switch suitable
for Voltmeter
1
168
168
... More
I148 - Providing and fixing aluminium die cast body tubular type universal hydraulic door closer having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm , with necessary accessories and screws etc. complete.
60
1169
70182
... More
I443 - Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay auto manual reset facility suitable to mount on DIN rail flush mounting on panel board.
3
9717
29153.25
... More
I001 - Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.b ii By Mechanical Means using Dozer. A In area of light jungle per 100 Sqm
44.2245
412
18249.239925
... More
I387 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON OFF, energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 40 A DP
10
1113
11130
... More
I524 - Supplying, fixing, testing and commissioning of CP health faucet consisting of: 1 No. 15mm dia CP Angle cock with wall flange. PVC flexible tube of 1.00m long tube with end nuts. Hand operated spray unit instant type CP Crutch etc., complete as directed by the Engineer in charge.
21
2400
50400
... More
I191 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box. 1 to 2 Module
216
143
31071.6
... More
I251 - Supply of round square recess surface mounted rolling type LED Down light with W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector and has swivelling unit of aluminium die cast eye ball and LED Lamp position retained by circular wire spring, with Life of 25000 burning hours and 70 percent lumen maintenance with CRI greater than 80. Power Input: 220 240V at50 60Hz and Power factor greater than 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition. LED square or round down light 15 18W
42
1390
58388.4
... More
I169 - Providing, fabricating and fixing partition frame work consisting of 50mm x 50mm sal wood frame work at spacing not exceeding 600mm c c fixed to the bottom and ceiling, the partition shall be skinned on both sides using 12mm thick commercial plywood of approved brand termite and water resistance, and top covered with 4mm thick approved quality veneer finished with melamine polish, complete including cost and conveyance of all materials, labour for all items of work, HOM as per specification.First Floor
25.96
15141
393060.36
... More
I275 - Supplying and Fixing of Fan
2
1269
2538.9
... More
I207 - Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends metal PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wires where ever necessary. 25 mm dia 2mm thick
350
85
29767.5
... More
I298 - Supplying and Fixing of 42 HD TV
1
60000
60000
... More
I262 - CAMERAS and ACCESSORIES Supply, Installation, Testing and Commissioning of 4 MP IP Indoor Dome camera with 1 3” progressive scan CMOS Image Sensor 2.8mm Fixed Lens 2560 x 1440 at30fps resolution, IR Illumination Up to 40m IR Distance ,WDR, Video Compression H.265 H.264 H.265 H.264, DC12V, PoE 802.3 af Class 0 IP67 Ingress Protection IK10 Vandal Resistance,The prices should include the necessary mounts and brackets.
20
15000
300000
... More
I211 - Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends metal PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wires where ever necessary. 32 mm dia 2.5mm thick
1480
108
160062
... More
I548 - Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes,having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge. External work 50mm dia
50
764
38231
... More
I240 - Supply, Installation, testing and Commissioning of 63A, three phase 5pin Plug and socket outlet controlled by 63A 4pole MCB
36
8650
311400
... More
I122 - Applying priming coats with primer of approved brand and manufacture, having low VOC Volatile Organic Compound content. With ready mixed pink or grey primer on wood work hard and soft wood having VOC content less than 50 grams litre as per specifications and as per directions of Engineer in charge.First Floor
168.48
59
10006.0272
... More
I269 - Supplying and fixing of 2mtr cat 6 Patch Cable
35
286
10010
... More
I149 - Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Door stopper 75mm.
60
105
6300
... More
I157 - Alluminium Expansion Joints Expansion joints consists of aluminium base frame thickness 2mm,extruded and anodised aluminium plate of 4mm thickness width 125mm for 25mm gap ,150mm for 50mm gap ,200mm for 100mm gap ,250mm for 15mm gap and 300mm for 200mm gap with aluminium profile,centring bar and pvc water barrierFirst Floor
21.7
7920
171864
... More
I427 - Supplying, fixing and wiring 0 to 1500A CT operated AC analog type Ammeter without CT
3
504
1512
... More
I556 - Supplying , installing, testing and commissioning of brass body nickel plated automatic air release valves with brass splindle, NBR and joinfraniteelastomer, staniless steel spring polypropylenic float at the top most points of watersupply distribution ringmain. Standard make confirming to ISI standards and as per instruction of engineer incharge.
3
1650
4950
... More
I544 - Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes,having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge. External work 20mm dia
413
230
95043.69
... More
I085 - Providing and laying Vitrified tiles in different sizes thickness to bespecified by manufacturer , with water absorption less than 0.08 percent andconforming to I.S. 15622, of approved make, in all colours and shade, over 12 mm thick bed of cement mortar 1:3 1 cement: 3 coarse sand , jointing with grey cement slurry at 3.3 kg m2 including grouting the joint with white cement and matching pigments etc. complete. Size of Tile 800x800 mm.Ground Floor
736.8029
1351
995678.598915
... More
I209 - Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends metal PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wires where ever necessary. 20 mm dia 2mm thick
2750
69
190575
... More
I242 - Supply and installation of 300 mm wide and 40mm height, 1.6 mm thick ladder type cable trays fixed with MS supports,anchor bolt etc.,complete as required at site.
80
465
37200
... More
I038 - Supplying, fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping welding joints, tying with binding wire soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. First Floor
60.11
94869
5702584.6065
... More
I147 - Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Aldrop 16mm dia, 300mm.
60
393
23625
... More
I305 - EPABx: Supply,Installation,Testing and Commissioning of micro processor based, state of the Art, Telephone PBx System , 2Analog Trunk Lines 80 Analogue Extensions
1
175000
175000
... More
I434 - Supplying and fixing Moulded Case Circuit Breaker MCCB over the existing wood panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS 13947. Icu is equal to 100 percent lcs . In 4P MCCB, all Poles should have protection for Short Cicrcuit Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non Priority loads must be available in the MCCB. MCCB shall be provided with double insulation insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open . Multi pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. 400 A 36 kA
3
29626
88880.4
... More
I279 - Supplying and Fixing of 32 HD TV with HDMI Cable and Acessories Fixing option Wall Mount and Table Mount both option required
1
30000
30000
... More
I280 - NETWORKING and TELECOMUNICATION Supplying and drawing UTP CAT 6E LAN cable.
2600
39
103740
... More
I531 - Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 g
25
98
2465.75
... More
I141 - Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
60
1104
66276
... More
I582 - Rain harvest pit of size 1200 mm dia and 3.50 m deep is proposed to be constructed. The rain water harvest pit consists of 300 mm deep RCC precast rings along with 50mm dia holes from the invert level of percolation pit. The pit outer wall is constructed in precast RCC and crushed stone of 200mm thick all around it on PCC bed of 1:4:8 ratio. The first layer for 600mm thick is left hollow with 50mm dia holes around it. The second layer for 600mm thick is filled with 40mm gravel filling. The third layer for 600mm thick is filled with 65mm gravel filling. The fourth layer for 900mm thick is filled with brick bats. Finally the top of rain harvest pit is covered with RCC precast slab with perforation of min 50 mm dia in strip of size 2’0’ wide, to allow entry of surface ground level rainwater.
4
35000
140000
... More
I366 - Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230 440VAC. 50 Hz
12 24V D.C.
3
540
1622.25
... More
I089 - Providing and laying Ceramic glazed floor tiles of size 300x300 mm thickness to be specified by the manufacturer , of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White,
Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 1 Cement : 4 Coarse sand , jointing with grey cement slurry at 3.3 kg m2 including pointing the joints with white cement and matching pigments etc., complete.First Floor
204.744
942
193028.54832
... More
I421 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON OFF, energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 40 A DP
47
1113
52311
... More
I493 - Laying of cable in Existing Trench GI pipe Stone Ware RCC Hume pipe using Wooden Aluminum Rollers as
directed by the departmental staff. 35 to 95 Sqmm
0.6
32695
19617.57
... More
I297 - Supplying and fixing of modular switch socket stepped electronic fan regulator s dimmer telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293. TV socket
2
154
308.7
... More
I150 - Brass Screws of 50mm .
4320
5
22680
... More
I456 - Supplying, fixing and wiring 3 Phase TVSS
1
14000
14000
... More
I116 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings wooden frames with rawl plugs screws etc.First Floor
3660.3
194
710354.421
... More
I098 - Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves excluding cost of cement concrete and side clamps , but including cost of materials, labour, usage charges complete as per specifications.First Floor
2.4435
146427
357795.54738
... More
I325 - 11 kV HT Metering cubicle of different CT Ratio, Both side cable entry type with 3 CT and 3 PT, With Transparent Cover TTB, with 30x8 mm Copper Busbar, Modem and 2 No of Meters for 3 Phase 4 Wire Metering without Load Break Switch HT Metering Box Fabricated out of 3 mm MS Sheet duly epoxy powder coated as per revised Specification Dwg No. BESCOM GM QS and S Dtd 24.11.2018
1
255645
255645.6
... More
I137 - Providing and laying cinder concrete in cement 1:15 1 cement : 15 cinder of 12.5mm nominal gauge on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications.First Floor
99.6012
2139
213049.954836
... More
I385 - Supplying and fixing Moulded Case Circuit Breaker MCCB over the existing wood panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS 13947. Icu is equal to 100 percent lcs . In 4P MCCB, all Poles should have protection for Short Cicrcuit Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non Priority loads must be available in the MCCB. MCCB shall be provided with double insulation insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open . Multi pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.125 A 25 kA
4
8911
35645.4
... More
I145 - Providing and Fixing MS Hold fast
480
250
120000
... More
I492 - Laying of cable in Existing Trench GI pipe Stone Ware RCC Hume pipe using Wooden Aluminum Rollers as
directed by the departmental staff. 2.5 to 25 Sqmm
0.55
21930
12061.665
... More
I391 - Supplying, fixing and wiring 0 to 600V 96x96mm AC
Voltmeter on existing panel wood board.
1
474
474.6
... More
I422 - Supplying, fixing and wiring 3 Phase TVSS
3
14000
42000
... More
I350 - Supplying and running of GI Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm GI Plate
4
190
760.2
... More
I416 - Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 75 x 75 x 6 mm
40
582
23310
... More
I265 - 4TB HDD Surveillance or Enterprise Grade
4
15000
60000
... More
I384 - Supplying and fixing Moulded Case Circuit Breaker MCCB over the existing wood panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS 13947. Icu is equal to 100 percent lcs . In 4P MCCB, all Poles should have protection for Short Cicrcuit Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non Priority loads must be available in the MCCB. MCCB shall be provided with double insulation insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open . Multi pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.100 A 25 kA
4
10858
43432.2
... More
I512 - Supplying and Fixing Chemical earthling for grounding. Conduits, IC cut outs and other equipments backfill compound which is non corrosive, thermally conductive, potential to permissible limits, superior Fault conduction capacity, non toxic, weather resistance and capable of achieving ohmic value less than one ohm. Using 4ft. Copper bonded rod with backfill compound.
2
4754
9508.8
... More
I196 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box. 10 12 Module
40
361
14448
... More
I069 - Applying priming coats with primer of approved brand and manufacture, having low VOC Volatile Organic Compound content. With water thinnable cement primer on wall surface having VOC content less than 50 g L as per specifications and as per directions of Engineer in charge.Terrace Floor
435.075
56
24699.20775
... More
I509 - Heavy Duty Copper Terminal Long Barrel 50 Sqmm Copper Terminal, Apprx Wt: 26 Gm
16
60
974.4
... More
I286 - Supplying fixing of Networking Switches. 24 Port Gigabyte manageable
2
43522
87045
... More
I357 - HT KVA Charges 1650 KVA For 50 KVA Max Dimand
1
82500
82500
... More
I532 - Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 450 mm length
25
123
3075.5
... More
I140 - Earthwork excavation in all soil deposits and filling sides of foundation upto plinth in layers not exceeding 20cms. in depth, compacting each deposited layer by ramming after watering with all lead and lift including cost of all labour complete as per specifications. specification.
2031.7249
423
859724.391435
... More
I312 - Supply and Installation of 2C x 1.5 Sqmm
1250
56
70875
... More
I108 - Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.First Floor
27
1077
29091.69
... More
I281 - Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable. 2 Pair
650
22
14332.5
... More
I365 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON OFF, energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 50 63 A TPN For TVSS Connectivity
1
3242
3242.4
... More
I179 - Supplying and fixing surface flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick C.C wall, including necessary rawl plugs, Machine NF screws etc., complete. 1 2Way
40
108
4326
... More
I389 - Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230 440VAC. 50 Hz
12 24V D.C.
3
540
1622.25
... More
I352 - Supplying and running of GI Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm Copper plate
4
7792
31168.2
... More
I557 - Supplying and fixing in position solid block masonry pedestals of approaximate size 400x230x230mm with brackets and G.I clamps for laying pipes on terrace. etc,. complete as directed by the Engineer in charge.
35
600
21000
... More
I395 - Supplying, fixing and wiring rotary selector switch suitable
for Voltmeter
1
168
168
... More
I542 - Supplying, fixing, testing and commissioning of portable Water Cooler Floor mounted model in corridors for drinking water with all the necessary accessories etc.
6
35000
210000
... More
I503 - Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class metal only 42 6.11 32mm dia
16
122
1965.6
... More
I217 - Supplying and fixing PVC metal conduit deep junction box. 32mm deep junction box
100
64
6405
... More
I132 - Extra for providing throating or drip moulding to R.C.C. chajja with plastering labour charges only as per specifications.Terrace Floor
351.969
34
12195.72585
... More
I379 - Supplying and fixing Moulded Case Circuit Breaker MCCB over the existing wood panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS 13947. Icu is equal to 100 percent lcs . In 4P MCCB, all Poles should have protection for Short Cicrcuit Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non Priority loads must be available in the MCCB. MCCB shall be provided with double insulation insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open . Multi pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.700 800A 50kA
1
52395
52395
... More
I447 - Supplying, fixing and wiring 3 Phase Digital Ammeter Voltmeter
3
1496
4488.75
... More
I130 - Extra for providing throating or drip moulding to R.C.C. chajja with plastering labour charges only as per specifications.Ground Floor
912.438
34
31615.9767
... More
I525 - Providing and fixing Toilet paper holder made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete Class Premium
13
3006
39084.76
... More
I153 - Providing and fixing ball bearing for rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge.
8
423
3385.2
... More
I183 - Supplying and flush mounting powder coated metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick stone cc wall. 1 2 Way
178
144
25792.2
... More
I213 - Supplying 2 mm thick heavy gauge PVC conduit pipe with bends metal junction boxes adhesives paste etc and bracing U or J hooks and cement plastering upto the surface of the trick level and run with 18 SWG Gi fish wire run through out the conduit wherever necessary. 25 mm dia 2mm thick
885
82
73410.75
... More
I033 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical
specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Terrace Floor
92.1498
7329
675418.409586
... More
I483 - Supplying, installation, testing and commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. 100 AH capacity
12
13051
156618
... More
I495 - Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc. complete. As per Civil SR KSRB 1 2, P 7 In soil ordinary
125
79
9975
... More
I002 - Earth work in surface excavation by mechanical means for lowering and leveling the ground for all works other than foundation in all kinds of soils and upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery and other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth
884.4912
99
88227.9972
... More
I307 - Supply,Installation,Testing and Commissioning of Biometric reader with 125kHz EM,
1
15000
15000
... More
I080 - Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone
slab over 20 mm average thick base of cement mortar 1:4 1 cement : 4 coarse sand laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer in Charge : ** Flamed finish granite stone slab Black, Cat Eye, River Pink or equivalent.First Floor
301.497
2615
788471.93943
... More
I180 - Supplying and fixing surface flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick C.C wall, including necessary rawl plugs, Machine NF screws etc., complete. 4 5Way
32
130
4166.4
... More
I436 - Supplying and fixing Moulded Case Circuit Breaker MCCB over the existing wood panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS 13947. Icu is equal to 100 percent lcs . In 4P MCCB, all Poles should have protection for Short Cicrcuit Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non Priority loads must be available in the MCCB. MCCB shall be provided with double insulation insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open . Multi pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. 100 A 25 kA
22
6390
140586.6
... More
I563 - Supplying, laying, jointing, testing and commissioning of PVC pipes class III 6 kg sq.cm waste pipe of agricultural series conforming to IS 4985 including all fittings, like Tees, Elbows, Bends, Collars, coupling, etc jointingg with solvent cement followed by application of leak proof adhesive like FRP paste laid on floors inside the toilets to the required slope including making necessary bores in wall foundations concrete slab as applicable, making good the bores with CM 1:3 or cement concrete as applicable, curing etc, complete as directed by the engineer in charge. 50 mm dia
24.9423
390
9727.497
... More
I118 - Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge.Ground Floor
593.712
120
71690.724
... More
I287 - Supplying fixing of Networking Switches. 48 Port 10 100 1000 Switch
2
21315
42630
... More
I364 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON OFF, energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6 32 A SP
6
435
2614.5
... More
I567 - Providing, fixing, testing and commissioning of deep seal PVC multi inlet floor trap of self cleansing design moulded or fabricated with CP grating, rubber ring solvent cement followed by application of leak proof adhesive like FRP paste including making good the floors etc., complete as directed by the Engineer in charge. Standard make confirming to ISI standards,Model as per attached photo catalogue and as per instruction of engineer incharge. 110mm dia inlet 75mm dia out let
74
800
59200
... More
I455 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON OFF, energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 40 A DP
4
1113
4452
... More
I113 - Providing and fixing of louvered ventilator made out of multi chambered UPVC Matching to RAL 9016 sections and with minimum TiO2 Titanium Dioxide at 6PHR with TPE Thermo Plastic Elastomer and lead free with gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium powder coated in white will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm. The cost is inclusive of all fixtures and separate charges for minor T and P s shall not be made Ground Floor
16.56
6004
99441.972
... More
I249 - Supplying of .feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours and 70 percent lumen maintenance with CRI greater than 80. Power Input: 220 240Vat 50 60Hz and Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4 36 40 W
32
1332
42638.4
... More
I070 - Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge.Ground Floor
4031.2488
133
537567.02748
... More
I174 - Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2x1.5Sqmm Phase and Neutral and 1x1.0 sqmm Earth wire FRLS multi strand PVC insulated copper wire confirming to IS 694: and latest amendments without control switch shall be fixed on the existing plastic sheet gang box, the other end of the wires shall be terminated with sufficient loose length in a wood PVC round block. complete for each outlet. Short point upto 3 mts from tapping point to out let via switch box
40
282
11298
... More
I045 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg m3 and minimum compressive strength of 4.00 N mm2 conforming to IS 2185 Part I 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Ground Floor
362.9032
1159
420677.38944
... More
I064 - Finishing walls with Acrylic Smooth exterior paint of required shade :New work Two coat applied at 1.67 ltr 10 m² over and including priming coat of exterior primer applied at 2.20 kg 10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge.Ground Floor
2293.6596
182
419051.60892
... More
I114 - Providing and fixing of louvered ventilator made out of multi chambered UPVC Matching to RAL 9016 sections and with minimum TiO2 Titanium Dioxide at 6PHR with TPE Thermo Plastic Elastomer and lead free with gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium powder coated in white will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm. The cost is inclusive of all fixtures and separate charges for minor T and P s shall not be made First Floor
16.56
6065
100436.4
... More
I182 - Supplying and fixing surface flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick C.C wall, including necessary rawl plugs, Machine NF screws etc., complete. 8 Way
22
181
3996.3
... More
I162 - Name Boards and Signages
1
150000
150000
... More
I510 - Heavy Duty Copper Terminal Long Barrel 95 Sqmm Copper Terminal, Apprx Wt: 58 Gm
16
135
2167.2
... More
I571 - Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster thickness shall be 20mm. Slope inside to be 1:6 in the concrete towards central drain and finished smooth. Fixing of pipes in CC 1:2:4 with graded metal of 20mm and down size. Providing and fixing SFRC Machinehole frame and cover Heavy Duty conforming to IS:12592 with latest amendment, in CC 1:2:4. Providing and fixing footsteps made of 12mm dia. steel bars Fe 500 with 3mm thick plastic encapsulation IS 10910 . The footsteps shall be
fixed 30cms apart and on CC block embeded to masonry wall. The whole works include watering, curing, barricading, danger lighting, pouring tar over MH frame and cover, cost of tar, shoring, strutting, de watering,
engraving Machinehole number with flow direction on the inner conical surface etc. as per the drawing etc. as per technical specifications and for the following diameters and depth etc. for 1.2mm dia:Constructing Brick Masonry Circular Machinehole 1.2 m internal dia.1.4 M depth and SFRC cover and frame
1
38745
38745.37
... More
I318 - TRANSFORMERS,HT CABLES and EARTHING SYSTEMS 11 kV, Jointing and Cable Termination Kit as per IS 13573 Heat Shrinkable Type Transition Jointing Kit for xLPE Cable3x95 Sqmm
4
3931
15724.8
... More
I158 - Providing, fabricating, assembling and fixing in position aluminium partitions using sections in combination of plain, single grove and double grove as per requirements for the frames of overall size 101.6mm x 44.45mm, 3.18mm.thick having section weight, plain sections 2.40kg m single grove section 2.541kg m. and double grove section 2.683 kg m and bottom bottom member 114.3 mm x 44.45 mm 3.18 mm thick and 2.6 46 kg m; aluminium louvres of size 77.6mmx27.6mm 1.7mm. thick section weight 0.483kg m; bottom portions provided with 12mm. thick pre laminated sheet both side of approved colour lamination exterior grade; aluminium sections of mat finish or glossy finish using section, spacing of vertical member shall not exceed 0.6 m. c to c sections are cut to the required lengths, joints mitered and corners grinded subdividing frames tennoned and riveted to the frames, the assembled frame should be stiffened with corner angles stripped and fixed with screws, rawl plugs and teak wood gutties to R.C.C.columns or masonry on sides,First Floor
68.586
7500
514395
... More
I221 - FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed wiring system with specified IS 694:1990 and cofirming to Latest amendments. 6sq.mm
6650
96
642390
... More
I201 - Supplying and fixing of modular switch socket stepped electronic fan regulator s dimmer telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293. 6 16 Amps universal sockets
88
247
21806.4
... More
I301 - Supplying and fixing of modular switch socket stepped electronic fan regulator s dimmer telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293. 20 pair krone module with MDF BOx
1
402
402.15
... More
I435 - Supplying and fixing Moulded Case Circuit Breaker MCCB over the existing wood panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS 13947. Icu is equal to 100 percent lcs . In 4P MCCB, all Poles should have protection for Short Cicrcuit Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non Priority loads must be available in the MCCB. MCCB shall be provided with double insulation insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open . Multi pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. 125 A 25 kA
10
10858
108580.5
... More
I401 - Supplying and fixing of Modular MCB Devices Tripper With Breaking capacity of 6kA. 16 32 A TP MCB
6
842
5052.6
... More
I099 - Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves excluding cost of cement concrete and side clamps , but including cost of materials, labour, usage charges complete as per specifications.Terrace Floor
0.1845
147891
27286.027875
... More
I453 - Supplying and fixing Moulded Case Circuit Breaker MCCB over the existing wood panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS 13947. Icu is equal to 100 percent lcs . In 4P MCCB, all Poles should have protection for Short Cicrcuit Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non Priority loads must be available in the MCCB. MCCB shall be provided with double insulation insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open . Multi pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. 100 A 25 kA
5
6390
31951.5
... More
I336 - Transparent Alkathine tube 19 mm dia, 2 mm thick in coils of 30 Mtr
15
542
8142.75
... More
I579 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials excluding cost of specials with jointing of approved type, with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS Contractor will make his own arrangements for procuring water for testing etc. complete For: PVC pipes 160mm dia, 6 kg Sq CM and class 4
431.9805
655
283115.699895
... More
I081 - Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 1 cement : 3 coarse sand proportion with a coat of rough plastering using CM 1:4 1 cement : 4 fine sand , cut to required shape, pattern with paper joints, finished with cement mortar using white cement and colour pigments to match the colour of slab making through jointing with sealant, grooves in joints including cost of curing etc., complete including cost and conveyance of all materials, mortar, labour for all items of work, usage charges of machinery etc., complete as per specification.Ground Floor
44.2814
3787
167709.16029
... More
I358 - Liasioning Charges Approximatly
1
85000
85000
... More
I506 - Supply and wrapping the conductor with camabrick tape roll.
5
123
619.5
... More
I076 - Providing and laying 5mm thick Self levelling Epoxy Flooring for Residential, Commercial, Sports and Industrial purpose made of reputed brand applied at 1L m2 on existing Concrete substrate of 25Mpa or more. The Concrete shall be free from any defects and cracks. The epoxy compound shall have low VOC Based on USEPA Method 24 Section 11.2.2 and ASTM D2369 98 and is chemically resistant and antimicrobial. The surface of Concrete shall be cleaned thoroughly and free from laitance and applied with primer cured for 6 8 hours. The mix shall be mixed using Hand mixing rotary machine. The underlay shall be laid with 3mm thickness and overlay at 2mm. The entire operation shall be finished in line with epoxy coving and marked with 100mm thickness yellow marking lines complete as per the direction of Engineer in charge.
888.8249
1518
1349502.84567
... More
I124 - Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge.Ground Floor
183.168
120
22117.536
... More
I464 - Supplying, fixing and wiring 3 Phase Digital Ammeter Voltmeter
1
1496
1496.25
... More
I101 - Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets core veneer hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 part I 1991. from manufacturer complete as per spcification. do 40 mm thick both side TeakFirst Floor
70.2
5260
369257.616
... More
I346 - Spiral Earth Electrode
20
333
6678
... More
I530 - Providing and fixing CP Brass 32mm size Bottle Trap of approved quality and make and as per the direction of Engineer in charge.
25
859
21475.25
... More
I129 - Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M 30 grade made of C and D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand,
filling the joints with fine sand etc. all complete as per the direction of Engineer in charge.Ground Floor
372
840
312480
... More
I410 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON OFF, energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6 32 A SP
3
435
1307.25
... More
I555 - Providing, fixing, testing and commissioning of Lawn hydrant ball valves for gardening of brass body nickel plated with stainless steel ball, lever operated with gun metal nozzel for connecting rubber hose and tested to 20 kg sq.cm. 20 mm dia
8
950
7600
... More
I514 - Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment s on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150mm all round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia.
14
3685
51597
... More
I029 - Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttresses, plinth cills and string courses cost of all materials, labour complete as per specifications.RETAINING STRUCTURES is equal to 10 percent OF CONCRETE QNTY Terrace floor
16.86
732
12356.5254
... More
I478 - Supplying, fixing and wiring 0 to 1500A CT operated AC analog type Ammeter without CT
1
504
504
... More
I485 - Supply of Battery Accessories* Battery Breaker * Intererconnecting cables between batteries.* Battery stand for housing the batteries* Cables between UPS and Batteries [5 Mtrs. Max]
1
22500
22500
... More
I060 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 1 cement: 4 fine sand including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge.First Floor
897.4896
312
280779.62136
... More
I268 - Supplying and Fixing of patch panel for LAN cabling 24 port 10 100 1000 patch panel
2
8260
16520
... More
I546 - Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes,having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge. External work 32mm dia
45
394
17752.95
... More
I360 - Supplying A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic FRP DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete 1000 A duble run 4 x 60 x 10 mm Aluminium Strips
2.5
11109
27772.5
... More
I543 - Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, i c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm dia
370
401
148714.1
... More
I022 - Addendum I Percentage Additionalities for Formwork, Centering and Scaffolding.Percentage on finished rate of concrete per m3.BEAMS AND LINTEL is equal to 60 percent OF CONCRETE QNTY. First Floor
15.8248
4354
68904.34416
... More
I399 - Supplying A rated 3Phase with Neutral bus bar arrangement using required capacity Electrolytic Al strips covered with Heat shrinkable PVC sleves mounted on Phenolic FRP DMC insulators which are mounted on powder coated 40x6mm MS flat frame work in existing Panel Board. The Bus bars shall have suitable holes for termination of Incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc complete 100 A 4 x 30 x 6 mm Aluminium Strips
2.5
2588
6470.625
... More
I121 - Applying priming coats with primer of approved brand and manufacture, having low VOC Volatile Organic Compound content. With ready mixed pink or grey primer on wood work hard and soft wood having VOC content less than 50 grams litre as per specifications and as per directions of Engineer in charge.Ground Floor
183.168
58
10770.2784
... More
I550 - Supply and delivery at site GM copper alloy Gate Valves confirming to Class I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed females ends confirming to IS 554 1990 body hydraulically tested 1.5HP seat standard tested 1 HP with IS mark. For 25 mm dia GM Copper alloy Gate valves
21
1239
26034.12
... More
I204 - Extra length of GI pipe of class B 19mm dia for down rod.
209
206
43231.65
... More
I371 - Supplying, fixing and wiring rotary selector switch suitable
for Ammeter
1
210
210
... More
I529 - Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow including operated levers
25
4361
109046
... More
I010 - Addendum I Percentage Additionalities for Formwork, Centering and Scaffolding.Percentage on finished rate of concrete per m3.FOUNDATION UP TO PLINTH is equal to 8 percent OF CONCRETE QNTY. Ground Floor
449.559
532
239264.29098
... More
I450 - Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 75 x 75 x 6 mm
10
582
5827.5
... More
I463 - Supplying, fixing and wiring rotary selector switch suitable for Voltmeter
1
168
168
... More
I294 - Supplying and fixing of 2mtr cat 6 Patch Cable
40
269
10794
... More
I172 - Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top and bottom pivot and double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer in charge Door handle, lock and stopper etc. to be paid separately including cost of materials, labour, usage charges of machinery complete as perspecifications and as per directions of the Engineer in Charge. Ground Floor
2.88
4040
11636.352
... More
I293 - Supplying and fixing of I Osocket, face plate with back box. Double I O
20
577
11550
... More
I400 - Supplying and fixing Moulded Case Circuit Breaker MCCB over the existing wood panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS 13947. Icu is equal to 100 percent lcs . In 4P MCCB, all Poles should have protection for Short Cicrcuit Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non Priority loads must be available in the MCCB. MCCB shall be provided with double insulation insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open . Multi pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. 125 A 25 kA
1
8911
8911.35
... More
I260 - Fixing a ceiling Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary length of 23 0.0076 inch PVC insulated twin twisted copper wire and wiring.
217
170
36911.7
... More
I469 - Supplying and fixing Moulded Case Circuit Breaker MCCB over the existing wood panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS 13947. Icu is equal to 100 percent lcs . In 4P MCCB, all Poles should have protection for Short Cicrcuit Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non Priority loads must be available in the MCCB. MCCB shall be provided with double insulation insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open . Multi pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.125 A 25 kA
3
10858
32574.15
... More
I480 - Supplying, fixing and wiring rotary selector switch suitable for Voltmeter
1
168
168
... More
I333 - Good Quality Salt for grounding purposes packed in 50 Kg gunny bag
8
325
2604
... More
I125 - Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge.First Floor
168.48
121
20547.8208
... More
I304 - 8 x 100 1000 Base T 802.3at supported PoE Ports 2 x 1GbE SFP Ports Managed Switch with SFP Transceiver Module x 2 Nos
1
18000
18000
... More
I232 - Supplying and fixing Moulded Case Circuit Breaker MCCB over the existing wood panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS 13947. Icu is equal to 100 percent lcs . In 4P MCCB, all Poles should have protection for Short Cicrcuit Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non Priority loads must be available in the MCCB. MCCB shall be provided with double insulation insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open . Multi pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. 100A 25kA MCCB
4
8911
35645.4
... More
I214 - Supplying 2 mm thick heavy gauge PVC conduit pipe with bends metal junction boxes adhesives paste etc and bracing U or J hooks and cement plastering upto the surface of the trick level and run with 18 SWG Gi fish wire run through out the conduit wherever necessary. 32 mm dia 2.5mm thick
530
103
55093.5
... More
I327 - HT 3 Phase 4 Wire Static Meter CT, PT Operated 3 x 63.5 V, 1 Amps 0.2s Accuracy Class with RS 485 and ABT features
1
14543
14543.55
... More
I264 - NETWORK VIDEO RECORDER NVR Supply, Installation and Commissioning of 32 Channel NVR , 32 Channels input,1 audio input, 1 audio output, 1HDMI, 1 VGA, Display Split 1 4 8 9 16 25 36, H.265 H.264 MJPEG MPEG4, Resolution should supports up to 8MP, Backup Compatibility USB Device; 1 RJ 45 port 10 100 1000 4 SATA ports, up to 24TB,Power supply Single, 100 -240 VAC, 50 60 Hz.
1
35000
35000
... More
I566 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials excluding cost of specials with jointing of approved type, with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS Contractor will make his own arrangements for procuring water for testing etc. complete For:PVC pipes 160mm dia, 6 kg Sq CM and class 4
150
655
98308.5
... More
I194 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box. 6 Module
176
245
43243.2
... More
I341 - Collars for RCC Hume Pipe 200 mm Dia
6
86
516.6
... More
I088 - Providing and laying Ceramic glazed floor tiles of size 300x300 mm thickness to be specified by the manufacturer , of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White,
Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 1 Cement : 4 Coarse sand , jointing with grey cement slurry at 3.3 kg m2 including pointing the joints with white cement and matching pigments etc., complete.Ground Floor
204.103
933
190519.94535
... More
I208 - Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends metal PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wires where ever necessary. 32 mm dia 2.5mm thick
200
111
22260
... More
I210 - Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends metal PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wires where ever necessary. 25 mm dia 2mm thick
4150
81
339885
... More
I419 - Supplying and fixing Moulded Case Circuit Breaker MCCB over the existing wood panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS 13947. Icu is equal to 100 percent lcs . In 4P MCCB, all Poles should have protection for Short Cicrcuit Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non Priority loads must be available in the MCCB. MCCB shall be provided with double insulation insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open . Multi pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. 100 A 25 kA
32
6390
204489.6
... More
I187 - Supplying and flush mounting powder coated metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick stone cc wall. 8 Way
70
274
19183.5
... More
I517 - Supplying and running of GI Copper strips for grounding connections, using necessary fixing materials as required. 25x6mm GI strip
180
134
24192
... More
I035 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. First Floor
136.8321
7031
962082.914952
... More
I223 - FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed wiring system with specified IS 694:1990 and cofirming to Latest amendments. 16sq.mm
1001.3816
333
334361.31624
... More
I042 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg m3 and minimum compressive strength of 4.00 N mm2 conforming to IS 2185 Part I 2005 and constructed with CM 1:4 as per IS 2572:2005
including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Ground Floor
1548.15
1375
2129480.325
... More
I554 - Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm inner dimensions with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover and frame etc. excluding the cost of CI frame and cover FOR WATER SUPPLY VALVE CHAMBER
2
5783
11567.94
... More
I288 - Supplying and Fixing of Power strip
3
1529
4589.55
... More
I527 - Providing and fixing Robe hook twin made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete Class Economy
41
581
23827.15
... More
I489 - Supplying of 1.1 KV LT UG cable xLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS 1554 Part 1 or IS 7098 Part 1, Armouring strip thickness in average 5 percent and resistivity 14 Ohms Kms Max as per IS 3975. 50 Sqmm, 3.5 Core.
0.25
187921
46980.4125
... More
I040 - Providing Size Stone masonry with hard stone in foundation and plinth with Cement mortar 1:6 1 cement : 6 coarse sand
242.38
6708
1625994.111
... More
I239 - Supplying of TPST with rewirable porcelain channels in SM
enclosure. Made out of 14 SWG powder coated paint of
approved colour. 100A
2
7949
15899.1
... More
I362 - Supplying and fixing Moulded Case Circuit Breaker MCCB over the existing wood panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS 13947. Icu is equal to 100 percent lcs . In 4P MCCB, all Poles should have protection for Short Cicrcuit Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non Priority loads must be available in the MCCB. MCCB shall be provided with double insulation insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open . Multi pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. 700 800A 50kA
1
52395
52395
... More
I229 - Supplying and fixing regular MCB distribution boards on wall wood board flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB s single phase 3 phase single DOUBLE door with powder coated painting etc.Made out of 14 SWG MS enclosure. 12 Way SP and N
6
2445
14672.7
... More
I018 - Addendum I Percentage Additionalities for Formwork, Centering and Scaffolding.Percentage on finished rate of concrete per m3. for heights more than 3.50m from ground level.Roof Straight and Arched is equal to 50 percent. Ground Floor
367.903
3592
1321720.95974
... More
I273 - Supplying and Fixing of Power strip
2
1529
3059.7
... More
I355 - Laminated Schematic with glass frame
4
5000
20000
... More
I370 - Supplying, fixing and wiring 0 to 1500A CT operated AC analog
type Ammeter without CT
3
504
1512
... More
I424 - Supplying, fixing and wiring 50 5 to 400 5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound.
9
590
5310.9
... More
I282 - Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable. 20 Pair
80
85
6804
... More
I050 - Providing 12 mm cement plaster with cement mortar 1:6 1 cement: 6 fine sand including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge.Ground Floor
4031.2488
253
1020107.50884
... More
I159 - Providing, fabricating, assembling and fixing in position aluminium doors using following aluminium mat finish or glossy finish, outer frame plain section 101.6x44.45mm thickness 3.18mm, section weight 2.404 kg m, door shutters vertical section 44.62x44.45mm thickness 3.18mm, section weight 1.505kg m, top section 47.62x44.45mm thickness 3.00mm, section weight 1.426kg m bottom section 114.3x44.45 thickness 3.18mm, section weight 2.646kg m, door central section 49.91x44.45mm thickness 3.00mm, section weight 1.495 kg m glazing clips 19x17.3x11mm thickness 0.9mm section weight 0.124kg m; aluminium sections cut to length joint metred corners grinded, the shutters pivoted opening arrangement with heavy duty aluminium alloy automatic door closures floor mounted, providing and fixing standard approved accessories, such as aluminium handle for full width or length, tower bolts, lock, pivots:First Floor
9.6
7300
70080
... More
I109 - Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.Terrace Floor
2
1088
2176.48
... More
I353 - Rubber mat 1100V grade ISI approved 2 m x 1m x 10mm
4
2700
10800
... More
I299 - Supplying and Fixing of 32 HD TV
1
30000
30000
... More
I186 - Supplying and flush mounting powder coated metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick stone cc wall. 6 Way
150
231
34650
... More
I484 - 20 kVA Modular UPS Three Phase Input, Three Phase Output Hot Swipable with 20 kVA per module .Supply of 20 KVA UNINTERRUPTED POWER SUPPLY SYSTEM with Moudular type Digital Technology Three Phase Input, Three Phase Output With bi directional Static and manual by pass Switch .Hot swipable. 4 x 10 kVA module . Modular type With IGBT for Rectifier and Inverter With Input current harmonics lesserr than3 percent THDi With Input Power Factor greater than 0.99 With overall efficiency greater than 0.93 percentSupply of Battery Backup 30 Minutes through sealed maintenance free [SMF] Baterries. 12 V 100 AH with software monitoring.
1
515000
515000
... More
I084 - Providing half nosing for 20mm thick granite slab using required machinery including cost and conveyanceof all materials, labour for all items of work, HOM of equipment etc., complete as per specification.First Floor
380.46
189
71906.94
... More
I200 - Supplying and fixing of modular switch socket stepped electronic fan regulator s dimmer telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293. stepped fan Regulator Two Module
209
374
78343.65
... More
I564 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials excluding cost of specials with jointing of approved type, with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS Contractor will make his own arrangements for procuring water for testing etc. complete For: PVC pipes 75mm dia, 6 kg Sq CM and class 3
265
233
61827.15
... More
I097 - Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves excluding cost of cement concrete and side clamps , but including cost of materials, labour, usage charges complete as per specifications.Ground Floor
2.6302
144977
381320.34654
... More
I095 - Providing and fixing in position fully panelled Teak wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. excluding cost of fixtures Ground Floor
13.32
9800
130545.324
... More
I086 - Providing and laying Vitrified tiles in different sizes thickness to bespecified by manufacturer , with water absorption less than 0.08 percent andconforming to I.S. 15622, of approved make, in all colours and shade, over 12 mm thick bed of cement mortar 1:3 1 cement: 3 coarse sand , jointing with grey cement slurry at 3.3 kg m2 including grouting the joint with white cement and matching pigments etc. complete. Size of Tile 800x800 mm.First Floor
1152.3507
1364
1572797.376402
... More
I283 - Supplying and Fixing of sitch mountng rack with power manager and Cable manager. 36U with 650mm depth
2
32955
65910.6
... More
I144 - Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS hinges 125 mm.
480
52
25200
... More
I522 - Supplying and running GI Copper conductor for grounding and along with other wires in conduit system of wiring using necessary suitable size clamps, nails, guttas spacers etc. 8 SWG Copper wire.
320
110
35280
... More
I037 - Supplying, fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping welding joints, tying with binding wire soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Ground Floor
114.4943
93929
10754432.424855
... More
I046 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg m3 and minimum compressive strength of 4.00 N mm2 conforming to IS 2185 Part I 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.First Floor
398.7997
1170
466910.700763
... More
I475 - Supplying, fixing and wiring 50 5 to 400 5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound.
3
590
1770.3
... More
I560 - Providing GM copper alloy wheel valves check valve confirming to IS 778 1990 Class I with latest amendments No. 1 and with ISI mark screwed in bonnet integral seat inside, screw, rising spindle screwed female ends confirming to IS 554 1990 body hudraulically tested 1.50 HP seat hydraulically tested 1.00 HP etc. complete. For 40 mm dia GM Copper alloy wheel valves check valve
3
1206
3620.55
... More
I322 - Laying of cable in Existing Trench GI pipe Stone Ware RCC Hume pipe using Wooden Aluminum Rollers as directed by the departmental staff 3x95 to 150 Sqmm
0.2
64388
12877.62
... More
I433 - Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 75 x 75 x 6 mm
40
582
23310
... More
I454 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON OFF, energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 50 63 A TPN
6
3242
19454.4
... More
I317 - Supplying of shelf
2
1004
2009.7
... More
I110 - Providing and fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC Matching to RAL 9016 sections and with minimum TiO2 Titanium Dioxide at 6PHR with TPE Thermo Plastic Elastomer and lead free, gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware and Multi point locking system with touch lock. Wall thickness of frame and sash shall be of 2mm 2.5mm. Maximum possible size 2419mm x 2200mm. The cost is inclusive of all fixtures and separate charges for minor T and P s shall not be made Ground Floor
232.71
7070
1645422.597
... More
I134 - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace Chajjas Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400 percent and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats at 1.6kg per m2 to achieve final DFT dry film thickness of 1mm including prime coat of epoxy primer at150 g per m2 and protection with 120gsm Geo textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification.Terrace Floor
1748.444
875
1530045.85996
... More
I284 - Supplying and Fixing of sitch mountng rack with power manager and Cable manager. 18U with 450mm depth
4
29815
119263.2
... More
I049 - Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. length of mesh only be measured for paymentPlaster mesh 100mm wideTerrace Floor
682.9
47
32185.077
... More
I094 - Providing Teak wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves excluding cost of cement concrete and side clamps , but including cost of materials, labour, usage charges complete as per specifications.Ground Floor
0.5647
247431
139724.539815
... More
I382 - Supplying and fixing Moulded Case Circuit Breaker MCCB over the existing wood panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS 13947. Icu is equal to 100 percent lcs . In 4P MCCB, all Poles should have protection for Short Cicrcuit Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non Priority loads must be available in the MCCB. MCCB shall be provided with double insulation insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open . Multi pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.250 A 36 kA
7
24722
173055.75
... More
I027 - Addendum I Percentage Additionalities for Formwork, Centering and Scaffolding.Percentage on finished rate of concrete per m3. chajja, corbels etc., including edges including cost of all materials, labour complete as per specificationsChejjas, Canopy and Other Architectural projections of minor sections is equal to 45 percent. First Floor
7.1566
3164
22643.4824
... More
I516 - Supplying and running of GI Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip
385
86
33148.5
... More
I025 - Addendum I Percentage Additionalities for Formwork, Centering and Scaffolding.Percentage on finished rate of concrete per m3. for Stairs excluding landing except spiral staircase including cost of all materials, labour complete as per specificaiton. First Floor
10.296
3628
37359.036
... More
I441 - Supplying, fixing and wiring 50 5 to 400 5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound.
9
590
5310.9
... More
I185 - Supplying and flush mounting powder coated metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick stone cc wall. 4 5Way
82
185
15239.7
... More
I188 - Supplying and flush mounting powder coated metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick stone cc wall. 10 12 Way
40
334
13398
... More
I486 - Supplying of 1.1 KV LT UG cable xLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS 1554 Part 1 or IS 7098 Part 1, Armouring strip thickness in average 5 percent and resistivity 14 Ohms Kms Max as per IS 3975. 10 Sqmm, 4 Core.
0.2
123904
24780.84
... More
I243 - Supply and installation of 150 mm wide and 40mm height, 1.6 mm thick Perfforated cable trays fixed with MS supports,anchor bolt etc.,complete as required at site.
95
510
48450
... More
I193 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box. 4 Module
104
183
19110
... More
I392 - Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay auto manual reset facility suitable to mount on DIN rail flush mounting on panel board.
1
9717
9717.75
... More
I417 - Supplying and fixing Moulded Case Circuit Breaker MCCB over the existing wood panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS 13947. Icu is equal to 100 percent lcs . In 4P MCCB, all Poles should have protection for Short Cicrcuit Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non Priority loads must be available in the MCCB. MCCB shall be provided with double insulation insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open . Multi pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. 400 A 36 kA
3
29626
88880.4
... More
I574 - Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster thickness shall be 20mm. Slope inside to be 1:6 in the concrete towards central drain and finished smooth. Fixing of pipes in CC 1:2:4 with graded metal of 20mm and down size. Providing and fixing SFRC Machinehole frame and cover Heavy Duty conforming to IS:12592 with latest amendment, in CC 1:2:4. Providing and fixing footsteps made of 12mm dia. steel bars Fe 500 with 3mm thick plastic encapsulation IS 10910 . The footsteps shall be
fixed 30cms apart and on CC block embeded to masonry wall. The whole works include watering, curing, barricading, danger lighting, pouring tar over MH frame and cover, cost of tar, shoring, strutting, de watering,
engraving Machinehole number with flow direction on the inner conical surface etc. as per the drawing etc. as per technical specifications and for the following diameters and depth etc. for 1.2mm dia:Constructing Brick Masonry Circular Machinehole 1.2 m internal dia.2.0 M depth and SFRC cover and frame
1
64461
64461.43
... More
I163 - Cornices and Elevation Features
123.15
3000
369450
... More
I227 - Supplying and fixing regular MCB distribution boards on wall wood board flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB s single phase 3 phase single DOUBLE door with powder coated painting etc.Made out of 14 SWG MS enclosure. 4 Way TP and N
4
4239
16959.6
... More
I031 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical
specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Ground Floor
751.1443
7185
5397084.467145
... More
I244 - Supply and laying of Raceways 200mm wide x 40mm Deep MS cold galvanised 16 guage made of CRCA sheet with removable type cover plate maximum length of each section shall not be more than 2.5 Mtrs. Length. etc., as required.
70
865
60550
... More
I494 - Laying of cable in Existing Trench GI pipe Stone Ware RCC Hume pipe using Wooden Aluminum Rollers as
directed by the departmental staff. 120 to 240 Sqmm
0.4
33891
13556.76
... More
I059 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 1 cement: 4 fine sand including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge.Ground Floor
1139.7025
309
353022.849375
... More
I330 - Erection of 200 250 kVA Transformer
1
2391
2391.9
... More
I388 - Supplying, fixing and wiring 3 Phase TVSS
1
14000
14000
... More
I496 - Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc. complete. As per Civil SR KSRB 1 2, P 7 In soil hard
35
107
3748.5
... More
I403 - Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 40 x 40 x 6 mm
6
320
1921.5
... More
I340 - RCC Hume Pipe 2000 mm long 200 mm Dia
10
322
3223.5
... More
I115 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings wooden frames with rawl plugs screws etc.Ground Floor
5194.98
192
998215.407
... More
I123 - Applying priming coats with primer of approved brand and manufacture, having low VOC Volatile Organic Compound content. With ready mixed pink or grey primer on wood work hard and soft wood having VOC content less than 50 grams litre as per specifications and as per directions of Engineer in charge.Terrace Floor
13.824
59
829.16352
... More
I398 - Supplying, fixing and wiring Automatic Power Factor controller circuit unit fully, static units controlled by 14 stage microprocessor operation, relays LED display, self programming function for power stages and operating logic checking facility for healthy and efficient of each individual capacitor bank, measurement of network harmonics with indication when limit values are exceeded, Comprehensive displays with large, three phase LED display, Long term memory for settings, protection for over voltage, power factor correction fault and no voltage, to connect disconnect banks, with automatic recognition or with standard programs
1
20412
20412
... More
I233 - Supplying and fixing miniature circuit breakers on existing
MCB distribution boards using necessary fixing materials
and C Type curve, indicator ON OFF, energy cross 3 with
Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6 32 A SP
128
435
55776
... More
I170 - Providing and Fixing 12mm thick froasted Toughened glass patitions.Ground Floor
18.499
2100
38847.9
... More
I164 - Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge.Ground Floor
6
8689
52138.8
... More
I257 - Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374 79 and also comply with IS: 1709 1984 with latest amendment, Rated voltage 220 V 50 Hz, Rated power input 48 W 10 percent, Rated current As per IS:374 79, Rated power factor 0.9 lagging min , Rated speed 350 10 percent RPM, Rated air delivery 210 10 percent Cubic Meter Minimum, Rated service value 4.2 CMM W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms 2M Ohms , Leakage current Should not exceed 210 Micro Amp, Power input, W and current, Air Delivery and Fan Speed as per IS:374 1979 with latest amendment, 2 year manufacturer Warranty. 56 Sweep 5 Star 1400 mm
9
3941
35475.3
... More
I142 - Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in chargeSS Handles 300mm
60
577
34650
... More
I024 - Addendum I Percentage Additionalities for Formwork, Centering and Scaffolding.Percentage on finished rate of concrete per m3. for Stairs excluding landing except spiral staircase including cost of all materials, labour complete as per specificaiton. Ground Floor
33.8777
3592
121708.347466
... More
I445 - Supplying, fixing and wiring rotary selector switch suitable for Ammeter
3
210
630
... More
I580 - Providing, fixing, testing and commissioning of PVC rain water head khurras dome type grating with puddle flange to fix head in RCC slab specially fabricated from minimum 4mm thick PVC sheet, including removable heavy duty PVC grating of 50 x 3 mm thick PVC flats Round or Square as per approved design The quoted rate shall include for necessary grouting the khurras base with approved sealant complete all as shown in the drawing and as specified. Standard make confirming to ISI standards,Model as per attached photo catalogue and as per instruction of engineer incharge. 150 x 150mm PVC Grating
21
1800
37800
... More
I444 - Supplying, fixing and wiring 0 to 1500A CT operated AC analog type Ammeter without CT
3
504
1512
... More
I518 - Supplying and running of GI Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm GI Plate
10
918
9187.5
... More
I406 - Fixing a shunt capacitor of . kVAR capacity with necessary clA, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor. 6 to 10 kVAR
4
224
898.8
... More
I473 - Supplying, fixing and wiring 3 Phase TVSS
1
14000
14000
... More
I303 - Supply and Fixing of GbESpeed Wifi Router, PoE Support.
6
10000
60000
... More
I062 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.First Floor
5170.5723
106
548339.192415
... More
I017 - Addendum I Percentage Additionalities for Formwork, Centering and Scaffolding.Percentage on finished rate of concrete per m3.BEAMS AND LINTEL is equal to 60 percent OF CONCRETE QNTY. Terrace Floor
21.1894
4397
93185.471956
... More
I339 - Cable Covering Tile 125x250x40 mm
0.25
10767
2691.9375
... More
I039 - Supplying, fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping welding joints, tying with binding wire soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.Terrace Floor
17.3844
95817
1665735.657696
... More
I314 - Supply, installation, testing and commissioning of professional grade audio connectors for inter connection cables with in the rack and other units as well auditorium as required including charges for labour, lead and lifts, loading and unloading, cost of conveyance for all the materials with the accessories required for completion as per the detailed specifications
22
350
7700
... More
I526 - Providing and fixing Toilet paper holder made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete Class Economy
8
889
7118.08
... More
I331 - GI Grounding pipe, B Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg
8
780
6241.2
... More
I023 - Addendum I Percentage Additionalities for Formwork, Centering and Scaffolding.Percentage on finished rate of concrete per m3.BEAMS AND LINTEL is equal to 60 percent OF CONCRETE QNTY. Terrace Floor
8.8042
4397
38718.582508
... More
I078 - Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications.First Floor
61.995
5650
350292.8283
... More
I241 - Supply, Installation, testing and Commissioning of 32A, single phase 3pin plug and socket outlet controlled by 32A 2POLE MCB IP45
12
3850
46200
... More
I015 - Addendum I Percentage Additionalities for Formwork, Centering and Scaffolding.Percentage on finished rate of concrete per m3.BEAMS AND LINTEL is equal to 60 percent OF CONCRETE QNTY. Ground Floor
234.1891
4311
1009610.287119
... More
I126 - Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge.Terrace Floor
13.824
123
1702.84032
... More
I075 - Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge.Terrace Floor
236.055
136
32110.56165
... More
I181 - Supplying and fixing surface flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick C.C wall, including necessary rawl plugs, Machine NF screws etc., complete. 6 Way
22
143
3164.7
... More
I467 - Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 75 x 75 x 6 mm
10
582
5827.5
... More
I490 - Supplying of 1.1 KV LT UG cable xLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS 1554 Part 1 or IS 7098 Part 1, Armouring strip thickness in average 5 percent and resistivity 14 Ohms Kms Max as per IS 3975. 95 Sqmm, 3.5 Core.
0.35
391875
137156.5125
... More
I100 - Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets core veneer hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 part I 1991. from manufacturer complete as per spcification. do 40 mm thick both side TeakGround Floor
76.32
5208
397474.56
... More
I302 - Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends metal PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wires where ever necessary. 25 mm dia 2mm thick
1050
81
85995
... More
I520 - Supplying and running of GI Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm Copper plate
4
7792
31168.2
... More
I414 - Fabricating supplying and mounting MS box made out SWG suitable for floor wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 14 SWG
295000
-
156350
... More
I577 - Filling available excavated earth excluding rock in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and
watering, lead up to 50 m and lift upto 1.5 m.
175
282
49365.75
... More
I386 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON OFF, energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 50 63 A TPN
16
3242
51878.4
... More
I224 - MCB DB and CABLE TRAY Supplying and fixing regular MCB distribution boards on wall wood board flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB s single phase 3 phase single DOUBLE door with powder coated painting etc.Made out of 14 SWG MS enclosure. 12 Way TP and N
4
9171
36687
... More
I438 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON OFF, energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 40 A DP
28
1113
31164
... More
I497 - Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc. complete. As per Civil SR KSRB 1 2, P 7 Cutting road surface
30
86
2583
... More
I057 - Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 1 cement : 5 coarse sand and a top layer 6 mm thick cement plaster with cement mortar 1:3 1 cement : 3 coarse sand finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge.First Floor
1800.4987
408
735125.614223
... More
I276 - Supplying and fixing of Castor wheels to the Shelf set of 4
2
1661
3322.2
... More
I468 - Supplying and fixing Moulded Case Circuit Breaker MCCB over the existing wood panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS 13947. Icu is equal to 100 percent lcs . In 4P MCCB, all Poles should have protection for Short Cicrcuit Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non Priority loads must be available in the MCCB. MCCB shall be provided with double insulation insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open . Multi pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.400 A 36 kA
1
29626
29626.8
... More
I058 - Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 1 cement : 5 coarse sand and a top layer 6 mm thick cement plaster with cement mortar 1:3 1 cement : 3 coarse sand finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge.Terrace Floor
1096.548
412
452194.46424
... More
I007 - Providing and injecting chemical emulsion for Pre constructional Anti Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20 percent E.C. Lindane 20 percent E.C. at 3.19 l m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications.
4160.4267
123
515476.86813
... More
I344 - Yellow Cambric tape 25 mm wide 7 mil thick and in rolls of 50 Mtr
6
126
756
... More
I572 - Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster thickness shall be 20mm. Slope inside to be 1:6 in the concrete towards central drain and finished smooth. Fixing of pipes in CC 1:2:4 with graded metal of 20mm and down size. Providing and fixing SFRC Machinehole frame and cover Heavy Duty conforming to IS:12592 with latest amendment, in CC 1:2:4. Providing and fixing footsteps made of 12mm dia. steel bars Fe 500 with 3mm thick plastic encapsulation IS 10910 . The footsteps shall be
fixed 30cms apart and on CC block embeded to masonry wall. The whole works include watering, curing, barricading, danger lighting, pouring tar over MH frame and cover, cost of tar, shoring, strutting, de watering,
engraving Machinehole number with flow direction on the inner conical surface etc. as per the drawing etc. as per technical specifications and for the following diameters and depth etc. for 1.2mm dia:Constructing Brick Masonry Circular Machinehole 1.2 m internal dia.1.6 M depth and SFRC cover and frame
1
44082
44082.86
... More
I068 - Applying priming coats with primer of approved brand and manufacture, having low VOC Volatile Organic Compound content. With water thinnable cement primer on wall surface having VOC content less than 50 g L as per specifications and as per directions of Engineer in charge.First Floor
5170.5723
56
290637.868983
... More
I090 - Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 1 cement : 4 coarse sand , joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of the slab upto 0.50 m2.Ground Floor
33.81
4206
142215.003
... More
I197 - Supplying and fixing of modular switch socket stepped electronic fan regulator s dimmer telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293. 6 amps one way switch
893
107
95640.3
... More
I458 - Supplying, fixing and wiring 50 5 to 400 5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound.
3
590
1770.3
... More
I254 - Supply and fixing of 2x22W LED Light Fixture
32
3650
116800
... More
I570 - Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster thickness shall be 20mm. Slope inside to be 1:6 in the concrete towards central drain and finished smooth. Fixing of pipes in CC 1:2:4 with graded metal of 20mm and down size. Providing and fixing SFRC Machinehole frame and cover Heavy Duty conforming to IS:12592 with latest amendment, in CC 1:2:4. Providing and fixing footsteps made of 12mm dia. steel bars Fe 500 with 3mm thick plastic encapsulation IS 10910 . The footsteps shall be
fixed 30cms apart and on CC block embeded to masonry wall. The whole works include watering, curing, barricading, danger lighting, pouring tar over MH frame and cover, cost of tar, shoring, strutting, de watering,
engraving Machinehole number with flow direction on the inner conical surface etc. as per the drawing etc. as per technical specifications and for the following diameters and depth etc. for 1.2mm dia:Constructing Brick Masonry Circular Machinehole 1.2 m internal dia.1.2 M depth and SFRC cover and frame
1
33267
33267.89
... More
I429 - Supplying, fixing and wiring rotary selector switch suitable for Voltmeter
3
168
504
... More
I289 - Supplying of shelf
3
868
2605.05
... More
I071 - Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge.First Floor
3580.3412
134
482200.352816
... More
I143 - Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Tower Bolts 250x10mm.
120
210
25200
... More
I014 - Addendum I Percentage Additionalities for Formwork, Centering and Scaffolding.Percentage on finished rate of concrete per m3 COLUMNS is equal to 70 percent OF CONCRETE QNTY. Terrace Floor
23.04
5130
118211.328
... More
I320 - 3x95 to 3x150 Sqmm
10
2790
27909
... More
I106 - Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC Wood PolymerComposite solid plain flush door shutter of required size comprising of virgin polymer of K value 58 60 Suspension Grade , calcium carbonate and natural fibers wood powder rice husk wheat husk and non toxic additives maximum toxicity index of 12 for 100 g having minimum density of 650 kg m3 and screw withdrawal strength of 1800 N Face and 900 N Edge , minimum compressive strength of 50 N mm2 , modulus of elasticity 850 N mm2 and resistance to spread of flame of Class A category with property of being termite borer proof, water moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges. Cost of Fixtures to be paid separately do 35 mm thicknessFirst Floor
55.44
4285
237587.0112
... More
I446 - Supplying, fixing and wiring rotary selector switch suitable for Voltmeter
3
168
504
... More
I189 - Supplying and flush mounting powder coated metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick stone cc wall. 16 Way
24
381
9147.6
... More
I315 - Supplying and Fixing of switch mounting rack with power manager and Cable manager. 18U with 650mm depth
1
21431
21431.55
... More
I160 - Providing S and S RCC SPUN VIBRATED CAST PIPES REINFORCED pipes NP 3 Class conforming to IS:458 1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work site, rolling and lowering into trenches, laying true to line and level including loading and unloading at both destinations and jointing of pipes and specials, perfect linking of joints with jack to correct position including cost of jointing materials, i.e, rubber rings conforming to IS: 5382 for S and S RCC pipes, with all leads and lifts as directed and giving necessary hydraulic test as per ISS to the required pressure and commissioning etc. complete. Contractor will make his own arrangements for procuring water for testing . Before the execution of the work, the contractor shall carry out the survey. RCC NP3 Class pipe of 450 mm dia.
840
2470
2075346
... More
I515 - Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode.The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts.
10
4468
44688
... More
I545 - Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes,having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge. External work 25mm dia
185
313
58073.35
... More
I218 - WIRING FOR Lighting Power Circuits FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed wiring system with specified IS 694:1990 and cofirming to Latest amendments. 1.5 Sq.mm
5410
27
147693
... More
I056 - Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 1 cement : 5 coarse sand and a top layer 6 mm thick cement plaster with cement mortar 1:3 1 cement : 3 coarse sand finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge.Ground Floor
2293.6599
404
927212.014575
... More
I409 - Supply and fixing of 4pole power contactor with NO NC contacts on existing wood panel board using necessary bolts, nuts, washers and wiring etc., complete with AC 3 Rating and as per IS 13947. 25 Amps
6
1354
8127
... More
I248 - Supplying of .feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours and 70 percent lumen maintenance with CRI greater than 80. Power Input: 220 240Vat 50 60Hz and Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4 20 22 W
270
724
195615
... More
I328 - CT PT Operated ETV Meter 0.2s Accuracy Class with
ABT feature and DLMS protocal with ToD with RS 232Port BIDIRECTIONAL Used for Boundary Metering
1
20963
20963.25
... More
I343 - Black Cambric tape 25 mm wide 10 mil thick and in rolls of 50 Mtr
6
137
825.3
... More
I368 - Supplying, fixing and wiring 0 to 600V 96x96mm AC
Voltmeter on existing panel wood board.
1
474
474.6
... More
I553 - Supply and delivery at site GM copper alloy Gate Valves confirming to Class I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed females ends confirming to IS 554 1990 body hydraulically tested 1.5HP seat standard tested 1 HP with IS mark. For 50 mm dia GM Copper alloy Gate valves
4
1790
7160.48
... More
I053 - Providing 6 mm cement plaster with cement mortar 1:3 1 cement : 3 fine sand on concrete surface ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge.Ground Floor
2711.73
221
600783.7815
... More
I420 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON OFF, energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 50 63 A TPN
29
3242
94029.6
... More
I440 - Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230 440VAC. 50 Hz
12 24V D.C.
9
540
4866.75
... More
I079 - Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone
slab over 20 mm average thick base of cement mortar 1:4 1 cement : 4 coarse sand laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer in Charge Flamed finish granite stone slab Black, Cat Eye, River Pink or equivalent.Ground Floor
306.99
2589
794889.207
... More
I198 - Supplying and fixing of modular switch socket stepped electronic fan regulator s dimmer telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293. 6 amps two way switch
104
174
18127.2
... More
I295 - Supplying and fixing of 3mtr cat 6 Patch Cable
40
347
13902
... More
I573 - Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster thickness shall be 20mm. Slope inside to be 1:6 in the concrete towards central drain and finished smooth. Fixing of pipes in CC 1:2:4 with graded metal of 20mm and down size. Providing and fixing SFRC Machinehole frame and cover Heavy Duty conforming to IS:12592 with latest amendment, in CC 1:2:4. Providing and fixing footsteps made of 12mm dia. steel bars Fe 500 with 3mm thick plastic encapsulation IS 10910 . The footsteps shall be
fixed 30cms apart and on CC block embeded to masonry wall. The whole works include watering, curing, barricading, danger lighting, pouring tar over MH frame and cover, cost of tar, shoring, strutting, de watering,
engraving Machinehole number with flow direction on the inner conical surface etc. as per the drawing etc. as per technical specifications and for the following diameters and depth etc. for 1.2mm dia:Constructing Brick Masonry Circular Machinehole 1.2 m internal dia.1.8 M depth and SFRC cover and frame
1
47603
47603.72
... More
I266 - 24 x 100 1000 GbE Base T 802.3at supported PoE Ports 4 x 1GbE SFP Ports Managed Switch with Layer 2 Image, 50 degree operating temperature support
2
36000
72000
... More
I431 - Fabricating supplying and mounting MS box made out SWG suitable for floor wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 14 SWG
265000
-
140450
... More
I253 - Supply and fixing of 12W LED retro fit lamp with holder
30
450
13500
... More
I151 - Nails of varying sizes .
200
70
14070
... More
I332 - Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each
8
709
5678.4
... More
I547 - Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes,having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge. External work 40mm dia
100
505
50586
... More
I470 - Supplying and fixing Moulded Case Circuit Breaker MCCB over the existing wood panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS 13947. Icu is equal to 100 percent lcs . In 4P MCCB, all Poles should have protection for Short Cicrcuit Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non Priority loads must be available in the MCCB. MCCB shall be provided with double insulation insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open . Multi pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. 100 A 25 kA
3
6390
19170.9
... More
I199 - Supplying and fixing of modular switch socket stepped electronic fan regulator s dimmer telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293. 6 Amps 3 way sockets
524
179
94084.2
... More
I460 - Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay auto manual reset facility suitable to mount on DIN rail flush mounting on panel board.
1
9717
9717.75
... More
I502 - Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class metal only 42 6.11 25mm dia
16
88
1411.2
... More
I537 - Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter
28
295
8284.64
... More
I083 - Providing half nosing for 20mm thick granite slab using required machinery including cost and conveyanceof all materials, labour for all items of work, HOM of equipment etc., complete as per specification.Ground Floor
588.35
189
111198.15
... More
I349 - Supplying and running of GI Copper strips for grounding connections, using necessary fixing materials as required. 25x6mm GI strip
40
134
5376
... More
I465 - Fabricating supplying and mounting MS box made out SWG suitable for floor wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 14 SWG
19500
-
10335
... More
I430 - Supplying, fixing and wiring 3 Phase Digital Ammeter Voltmeter
3
1496
4488.75
... More
I535 - Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing
not less than 88 g.
19
206
3929.2
... More
I011 - Addendum I Percentage Additionalities for Formwork, Centering and Scaffolding.Percentage on finished rate of concrete per m3. PLINTH BEAMS is equal to 50 percent OF CONCRETE QNTY.
101.3628
3326
337173.21792
... More
I393 - Supplying, fixing and wiring 0 to 1500A CT operated AC analog
type Ammeter without CT
1
504
504
... More
I237 - Supplying, fixing and wiring Residual current circuit breaker RCCB 240 450V up to 300mA sensitivity on existing wood panel board. 63Amps 4 pole
12
5822
69867
... More
I278 - Supplying and drawing UTP CAT 6E LAN cable.
2250
39
89775
... More
I471 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON OFF, energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 50 63 A TPN
6
3242
19454.4
... More
I377 - Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 75 x 75 x 6 mm
28
582
16317
... More
I462 - Supplying, fixing and wiring rotary selector switch suitable for Ammeter
1
210
210
... More
I030 - Providing and laying in position Cement Concrete for all Foundation works. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finishedlayers, well compacted using needle vibrators, including all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.
492.739
6652
3278094.0192
... More
I338 - Digging of Pit for providing GI Pipe type Earthing Hard Soil
4
3139
12558
... More
I334 - Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal and connected to equipment ground terminal using PVC Al wire as specified
15
2280
34209
... More
I111 - Providing and fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC Matching to RAL 9016 sections and with minimum TiO2 Titanium Dioxide at 6PHR with TPE Thermo Plastic Elastomer and lead free, gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware and Multi point locking system with touch lock. Wall thickness of frame and sash shall be of 2mm 2.5mm. Maximum possible size 2419mm x 2200mm. The cost is inclusive of all fixtures and separate charges for minor T and P s shall not be made First Floor
157.74
7141
1126486.0134
... More
I277 - Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends metal PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wires where ever necessary. 25 mm dia 2mm thick
1550
81
126945
... More
I226 - Supplying and fixing regular MCB distribution boards on wall wood board flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB s single phase 3 phase single DOUBLE door with powder coated painting etc.Made out of 14 SWG MS enclosure. 6 Way TP and N
9
5187
46683
... More
I329 - Distribution Transformer 3 Phase, 11kV 433V Stacked CRGO Core with Oil as per IS 1180 Part 1 : 2014. 250 kVA, Aluminium Wdg, Star 2 5 Star
1
569830
569830.8
... More
I252 - Supply and fixing of 18W LED Bulk Head light Fixture
26
1650
42900
... More
I335 - Bentonite clay slurry for earthing in 50 Kg Bag
15
386
5796
... More
I072 - Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge.Terrace Floor
199.02
136
27072.6906
... More
I533 - Providing and fixing Angle cock medium with wall flange made of Stainless steel with all concealed fitting arrangements and all necessary accesories
complete Class Economy
25
1081
27042.75
... More
I156 - Alluminium Expansion Joints Expansion joints consists of aluminium base frame thickness 2mm,extruded and anodised aluminium plate of 4mm thickness width 125mm for 25mm gap ,150mm for 50mm gap ,200mm for 100mm gap ,250mm for 15mm gap and 300mm for 200mm gap with aluminium profile,centring bar and pvc water barrierGround Floor
26.6
7920
210672
... More
I135 - Providing and laying water proofing treatment to the Water tanks and Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation of 50 percent applied at 1.5 kg m2 for internal side waterproofing in two layers with waiting period of 4 6 hrs per layer and food grade epoxy coating in two coats certified by CFTRI Mysuru, including surface preparation completely as per specification.Terrace floor
203.1975
532
108172.189125
... More
I261 - Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23 0.0076 inch PVC insulated twin core wire.
36
453
16329.6
... More
I482 - upplying, erecting, testing and commissioning of ON LINE UPS system suitable for operation on 230V, 50Hz, A C supply, with isolation transformer all accessories complete and Excluding batteries and wiring complete. 5 kVA ON LINE UPS
2
71802
143604.3
... More
I511 - Heavy Duty Copper Terminal Long Barrel 120 Sqmm Copper Terminal, Apprx Wt: 64 Gm
14
147
2058
... More
I246 - Supply and laying double walled corrugated DWC HDPE pipe inculding all necessary connecting sockets couplings Tees bends End caps of same materials in existing trench as per is 14930 part 11 suitable for drawing underground cable. 63mm OD 50MM ID
530
295
156350
... More
I513 - Supplying and Fixing Chemical earthling for grounding. Conduits, IC cut outs and other equipments backfill compound which is non corrosive, thermally conductive, potential to permissible limits, superior Fault conduction capacity, non toxic, weather resistance and capable of achieving ohmic value less than one ohm. Using 10ft. Copper bonded rod with backfill compound.
10
8918
89187
... More
I426 - Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay auto manual reset facility suitable to mount on DIN rail flush mounting on panel board.
3
9717
29153.25
... More
I131 - Extra for providing throating or drip moulding to R.C.C. chajja with plastering labour charges only as per specifications.First Floor
634.05
34
21969.8325
... More
I272 - Supplying and Fixing of sitch mountng rack with power manager and Cable manager. 6U with 450mm depth
2
7325
14651.7
... More
I051 - Providing 12 mm cement plaster with cement mortar 1:6 1 cement: 6 fine sand including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge.First Floor
3580.3412
255
915063.603896
... More
I055 - Providing 6 mm cement plaster with cement mortar 1:3 1 cement : 3 fine sand on concrete surface ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge.Terrace Floor
236.055
226
53348.43
... More
I345 - Providing chain link fencing 50mm size of 8 guage properly stretched between rectangular poles and fixed with suitable bolts and nuts, the free ends shall be welded to the pole and block pipe at top and bottom as required including cost of all materials, labour, lead and lifts, cutting, bending wherever necessary, wastage and lapping etc., complete as per the direction of the engineer incharge for work including two coats of approved quality paint over one coat of primer paint.
30
1200
36000
... More
I173 - Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top and bottom pivot and double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer in charge Door handle, lock and stopper etc. to be paid separately including cost of materials, labour, usage charges of machinery complete as perspecifications and as per directions of the Engineer in Charge. First Floor
6
4080
24484.8
... More
I488 - Supplying of 1.1 KV LT UG cable xLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS 1554 Part 1 or IS 7098 Part 1, Armouring strip thickness in average 5 percent and resistivity 14 Ohms Kms Max as per IS 3975. 25 Sqmm, 4 Core.
0.15
188836
28325.43
... More
I009 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour, Usage charges of
machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates .Ground Floor
400.09
6527
2611727.5065
... More
I034 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Ground Floor
156.7775
6961
1091406.56625
... More
I139 - Conveying by Loading and unloading of moorum debris. Placing tipper at loading point, loading with front end loader, dumping, turning for return trip, including time for haulage and return trip complete as per specifications. For 2km
2085.804
113
236968.19244
... More
I168 - Providing, fabricating and fixing partition frame work consisting of 50mm x 50mm sal wood frame work at spacing not exceeding 600mm c c fixed to the bottom and ceiling, the partition shall be skinned on both sides using 12mm thick commercial plywood of approved brand termite and water resistance, and top covered with 4mm thick approved quality veneer finished with melamine polish, complete including cost and conveyance of all materials, labour for all items of work, HOM as per specification.Ground Floor
5.22
15141
79036.02
... More
I310 - Supply, Installation, testing and Commissioning of 6Zone Voice alarm Controller with USB, MP3 Player, Including 6Zone Button paging Station with seamless Integration Facility with main fire alarm panel for voice evacuation complete as required.
1
132730
132730.23
... More
I296 - Supplying and Fixing of patch panel for LAN cabling. 24 port 10 100 1000 patch panel
2
8295
16590
... More
I105 - Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC Wood PolymerComposite solid plain flush door shutter of required size comprising of virgin polymer of K value 58 60 Suspension Grade , calcium carbonate and natural fibers wood powder rice husk wheat husk and non toxic additives maximum toxicity index of 12 for 100 g having minimum density of 650 kg m3 and screw withdrawal strength of 1800 N Face and 900 N Edge , minimum compressive strength of 50 N mm2 , modulus of elasticity 850 N mm2 and resistance to spread of flame of Class A category with property of being termite borer proof, water moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges. Cost of Fixtures to be paid separately do 35 mm thicknessGround Floor
55.44
4243
235234.692
... More
I175 - Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2x1.5Sqmm Phase and Neutral and 1x1.0 sqmm Earth wire FRLS multi strand PVC insulated copper wire confirming to IS 694: and latest amendments without control switch shall be fixed on the existing plastic sheet gang box, the other end of the wires shall be terminated with sufficient loose length in a wood PVC round block. complete for each outlet. Medium point above 3 mts upto 6mts from tapping point to outlet via switch box
108
397
42978.6
... More
I206 - Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends metal PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wires where ever necessary. 20 mm dia 2mm thick
235
72
17025.75
... More
I437 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON OFF, energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 50 63 A TPN
37
3242
119968.8
... More
I583 - Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments. 3 HP, size 50x40 Head 30M, Discharge 198 LPM
4
20002
80008.36
... More
I228 - Supplying and fixing regular MCB distribution boards on wall wood board flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB s single phase 3 phase single DOUBLE door with powder coated painting etc.Made out of 14 SWG MS enclosure. 8 Way SP and N
4
1946
7786.8
... More
I256 - Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374 79 and also comply with IS: 1709 1984 with latest amendment, Rated voltage 220 V 50 Hz, Rated power input 48 W 10 percent, Rated current As per IS:374 79, Rated power factor 0.9 lagging min , Rated speed 350 10 percent RPM, Rated air delivery 210 10 percent Cubic Meter Minimum, Rated service value 4.2 CMM W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms 2M Ohms , Leakage current Should not exceed 210 Micro Amp, Power input, W and current, Air Delivery and Fan Speed as per IS:374 1979 with latest amendment, 2 year manufacturer Warranty. 48 Sweep 5 Star 1200 mm
20
2810
56217
... More
I575 - Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm inner dimensions with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover and frame etc. excluding the cost of CI frame and cover.
9
5783
52055.73
... More
I082 - Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 1 cement : 3 coarse sand proportion with a coat of rough plastering using CM 1:4 1 cement : 4 fine sand , cut to required shape, pattern with paper joints, finished with cement mortar using white cement and colour pigments to match the colour of slab making through jointing with sealant, grooves in joints including cost of curing etc., complete including cost and conveyance of all materials, mortar, labour for all items of work, usage charges of machinery etc., complete as per specification.First Floor
20.8896
3825
79907.315712
... More
I326 - Erection of HT metering Cubicle on Platform.
1
1936
1936.2
... More
I259 - Fixing all types and all capacities of fluorescent false ceiling spot light CFL LED fittings indoor on the wall ceiling rafters girders using 23 0.0076 twin twisted PVC insulated wires, required Nos of round blocks and clA.
388
124
48480.6
... More
I523 - Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre 6 litre adjustable to 4 litre 8 litres , including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.
21
11903
249964.05
... More
I167 - Providing and fixing 6mm Clear opal white solar bronze blue green tinted Multi wall poly carbonate sheet for Tubular structure. The work including cost of all materials, labour charges, and hire charges of machinery for cutting, welding, grinding and erection equipments, with all lead and lifts, transportation, loading and unloading and all other incidental charges etc. complete as per specification and directions of the engineer in charge of the work.Terrace floor
2180.43
3281
7154535.9375
... More
I177 - Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2x1.5Sqmm Phase and Neutral and 1x1.0 sqmm Earth wire FRLS multi strand PVC insulated copper wire confirming to IS 694: and latest amendments without control switch shall be fixed on the existing plastic sheet gang box, the other end of the wires shall be terminated with sufficient loose length in a wood PVC round block. complete for each outlet. Two outlet in a row above 3mts upto 6 mts from tapping point to outlet via switches
64
710
45494.4
... More
I107 - Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.Ground Floor
31
1066
33070.8
... More
I309 - PA SYSTEM Supply and Installation of 6W RMSWall Mount Speaker with power taps at 6 4 2 on 100V, 60 15,000 Hz with all Accessories,
30
1882
56479.5
... More
I271 - Supplying and Fixing of sitch mountng rack with power manager and Cable manager. 27U with 650mm depth
2
33755
67510.8
... More
I138 - Bore Packing : Providing and applying high strength non shrink free flow grout confirming to BS 1881 Part 116 : 1983 comprising of blend of portland cement, graded fillars and chemical additives which impart controlled expansion in the plastic state duly minimizing water demand. Minimum 25mm thickness around the pipe First Floor
40
346
13860
... More
I321 - 11 kV, 3 Core, xPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS 7098 Part 2 Armouring wires dia and Resistivity as per IS 3975 95 Sqmm, 54 GI Wires 2.5 mm Dia
0.2
934149
186829.86
... More
I565 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials excluding cost of specials with jointing of approved type, with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS Contractor will make his own arrangements for procuring water for testing etc. complete For:PVC pipes 110mm dia, 6 kg Sq CM and class 3
165
435
71918.55
... More
I263 - Supply, Installation, Testing and Commissioning of 5MP IP Dome Bullet camera with 1 3.0” Progressive Scan CMOS Image Sensor F1.5 Lens 2688 x 1520 resolution0.005 Lux F1.6 color,30 IRE 0 Lux F1.6 IR ON IR Illumination Up to 60m IR Distance , Built in micro SD SDHC SDxC card slot,up to 128 GB,Inbuilt 64 GB micro SD card, DC12V, PoE 802.3 af Class 0 IP67 Ingress Protection IK10 Vanidal Resistance, The prices should include the necessary mounts and brackets.
3
22000
66000
... More
I461 - Supplying, fixing and wiring 0 to 1500A CT operated AC analog type Ammeter without CT
1
504
504
... More
I020 - Addendum I Percentage Additionalities for Formwork, Centering and Scaffolding.Percentage on finished rate of concrete per m3. for heights more than 3.50m from ground level.Roof Straight and Arched is equal to 50 percent. Terrace Floor
44.2363
3664
162116.749877
... More
I308 - Supply and Fixing of PC , T and A Software,
1
55000
55000
... More
I165 - Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge.First Floor
6
8776
52660.2
... More
I348 - Supplying and running of GI Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip
110
86
9471
... More
I432 - Supplying A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic FRP DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete 400 A duble run 4 x 50 x 10 mm Aluminium Strips
16
4667
74676
... More
I077 - Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications.Ground Floor
217.921
5594
1219137.2424
... More
I376 - Supplying A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic FRP DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 1000 A duble run 4 x 60 x 10 mm Aluminium Strips
7
11109
77763
... More
I498 - Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc. complete. As per Civil SR KSRB 1 2, P 7 C C. cutting
15
215
3228.75
... More
I477 - Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay auto manual reset facility suitable to mount on DIN rail flush mounting on panel board.
1
9717
9717.75
... More
I313 - Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends metal PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wires where ever necessary. 25 mm dia 2mm thick
610
81
49959
... More
I184 - Supplying and flush mounting powder coated metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick stone cc wall. 3 Way
450
166
75127.5
... More
I408 - ILPB Type push button with Lanmp ON OFF L and T Make
6
367
2205
... More
I449 - Supplying A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic FRP DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete 400 A duble run 4 x 50 x 10 mm Aluminium Strips
4
4667
18669
... More
I065 - Finishing walls with Acrylic Smooth exterior paint of required shade :New work Two coat applied at 1.67 ltr 10 m² over and including priming coat of exterior primer applied at 2.20 kg 10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge.First Floor
1800.4987
184
332246.025111
... More
I413 - Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy
1
9780
9780.75
... More
I044 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg m3 and minimum compressive strength of 4.00 N mm2 conforming to IS 2185 Part I 2005 and constructed with CM 1:4 as per IS 2572:2005
including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.Terrace Floor
312.03
1403
437824.8945
... More
I457 - Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230 440VAC. 50 Hz
12 24V D.C.
3
540
1622.25
... More
I255 - Supplying exhaust fan of 1440 RPM of 300 mm 12 size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply.
36
1566
56397.6
... More
I291 - Supplying and fixing of Castor wheels to the Shelf set of 4
3
1102
3307.5
... More
I411 - Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230 440VAC. 50 Hz
12 24V D.C.
3
540
1622.25
... More
I004 - Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery and other appurtenaces required to complete the work In ordinary soft rock without blasting Depth exceeding 1.5 m, but not exceeding 3 m.
740.0191
446
330233.523375
... More
I402 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON OFF, energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50 63 A TPN
2
2518
5037.9
... More
I418 - Supplying and fixing Moulded Case Circuit Breaker MCCB over the existing wood panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS 13947. Icu is equal to 100 percent lcs . In 4P MCCB, all Poles should have protection for Short Cicrcuit Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non Priority loads must be available in the MCCB. MCCB shall be provided with double insulation insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open . Multi pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. 125 A 25 kA
12
10858
130296.6
... More
I558 - Providing and fixing of brassY pot stainer screw type tested to 20 kg sq.cm. 50mm dia at terrace level
3
3400
10200
... More
I215 - Supplying and fixing PVC metal conduit deep junction box. 19 20mm deep junction box
271
51
13942.95
... More
I013 - Addendum I Percentage Additionalities for Formwork, Centering and Scaffolding.Percentage on finished rate of concrete per m3 COLUMNS is equal to 70 percent OF CONCRETE QNTY. First Floor
73.1839
5079
371766.89361
... More
I369 - Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay auto manual reset facility suitable to mount on DIN rail flush mounting on panel board.
1
9717
9717.75
... More
I534 - Providing and fixing Liquid soap dispenser made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete Class Economy
19
1851
35180.97
... More
I397 - Fabricating supplying and mounting MS box made out SWG suitable for floor wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7 tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 14 SWG
38500
-
20405
... More
I073 - Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge.Ground Floor
2711.7304
133
361609.24884
... More
I120 - Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge.Terrace Floor
9.72
123
1197.3096
... More
I203 - Supplying and fixing of modular switch socket stepped electronic fan regulator s dimmer telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293. 32A DP switch
54
342
18484.2
... More
I578 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials excluding cost of specials with jointing of approved type, with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS Contractor will make his own arrangements for procuring water for testing etc. complete For: PVC pipes 75mm dia, 6 kg Sq CM and class 3
20
233
4666.2
... More
I507 - Supplying and fixing 2mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts nuts and washer or welding as required. 150x50mm
125
446
55781.25
... More
I087 - Providing and laying Vitrified tiles in different sizes thickness to bespecified by manufacturer , with water absorption less than 0.08 percent andconforming to I.S. 15622, of approved make, in all colours and shade, over 12 mm thick bed of cement mortar 1:3 1 cement: 3 coarse sand , jointing with grey cement slurry at 3.3 kg m2 including grouting the joint with white cement and matching pigments etc. complete. Size of Tile 800x800 mm.Terrace Floor
71.66
1378
98784.0266
... More
I351 - Supplying and running of GI Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm Copper strip
60
918
55125
... More
I415 - Supplying A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic FRP DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 400 A duble run 4 x 50 x 10 mm Aluminium Strips
18
4667
84010.5
... More
I562 - Supplying, laying, jointing, testing and commissioning of PVC pipes class III 6 kg sq.cm waste pipe of agricultural series conforming to IS 4985 including all fittings, like Tees, Elbows, Bends, Collars, coupling, etc jointingg with solvent cement followed by application of leak proof adhesive like FRP paste laid on floors inside the toilets to the required slope including making necessary bores in wall foundations concrete slab as applicable, making good the bores with CM 1:3 or cement concrete as applicable, curing etc, complete as directed by the engineer in charge. 40 mm dia
75
310
23250
... More
I006 - Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings and bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sidesneatly dressed disposing off the excavated stuff or sorting and stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools and other appurtenaces required to complete the work.In all kinds of soils Depth upto 1.5 m
370.009
254
94019.2869
... More
I481 - Supplying, fixing and wiring 3 Phase Digital Ammeter Voltmeter
1
1496
1496.25
... More
I019 - Addendum I Percentage Additionalities for Formwork, Centering and Scaffolding.Percentage on finished rate of concrete per m3. for heights more than 3.50m from ground level.Roof Straight and Arched is equal to 50 percent. First Floor
224.896
3628
816035.136
... More
I063 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.Terrace Floor
435.075
107
46600.88325
... More
I190 - Supplying and flush mounting powder coated metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick stone cc wall. 18 Way
20
425
8505
... More
I270 - Rj 45 connector with Crimping with 4 x 4 PVC boxes
35
163
5705
... More
I238 - Supplying of TPST with rewirable porcelain channels in SM
enclosure. Made out of 14 SWG powder coated paint of
approved colour. 63A
2
4403
8807.26
... More
I152 - Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and rrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge.
19.259
2764
53244.39435
... More
I222 - FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed wiring system with specified IS 694:1990 and cofirming to Latest amendments. 10sq.mm
2680
175
469938
... More
I359 - LT KIOSK Fabricating supplying and mounting MS box made out SWG suitable for floor wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 14 SWG
88500
-
46905
... More
I581 - Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm inner dimensions with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover and frame etc. excluding the cost of CI frame and cover. FOR RAIN WATER CHAMBER
21
5783
121463.37
... More
I230 - Supplying and fixing regular MCCB distribution Panel
confirming to IS IEC 61439 3 and IK09 tested as per IS IEC 62262 with minimum IP43 protection provided with
Polyurethane PUR gasket, with suitable earthing system, on wall wood board flush mounting using required cl A , bolts, nuts, etc., with provision for fixing of suitable type capacity MCCB s as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440V 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single three phase suitable capacity MCB s as outgoings confirming to IS IEC 60898. 8 Way
4
13235
52941
... More
I347 - Caution Danger Board
12
208
2507.4
... More
I504 - Supplying Bitumen Compound and covering the cable joint pot heads
5
86
430.5
... More
I250 - Supplying of recess mounting non integral type . LED w luminaire comprising of pressure decast extruded aluminium housing, with spring loaded false ceiling clA, Power LEDs with CCT 6500 degree K, CRI greater than 70 percent. efficacy greater than 100 lumen per W, 120degree beam spread, life greater than25000 burning hours and Compliance to IS 10322 IEC 60598, LM 79 and LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF greater than 0.95, power loss should lesser than 5 percent of lamp Wage., short circuit and open circuit protection to be integrated in the circuit, THD less than 20 percent, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. LED modular down light 2 x2 34 36W
12
4780
57367.8
... More
I219 - FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed wiring system with specified IS 694:1990 and cofirming to Latest amendments. 2.5 sq.mm
14700
44
648270
... More
I047 - Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. length of mesh only be measured for paymentPlaster mesh 100mm wide Ground Floor
4155.4699
46
191982.70938
... More
I146 - Magnetic catcher triple type.
120
31
3780
... More
I508 - Supplying and fixing 2mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts nuts and washer or welding as required. 300x50mm
80
556
44520
... More
I316 - Supplying and Fixing of Power strip
1
1294
1294.65
... More
I005 - Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery and other appurtenaces required to complete the work Hard rock blasting prohibited Depth exceeding 1.5 m, but not exceeding 3 m.
370.009
1176
435130.584
... More
I487 - Supplying of 1.1 KV LT UG cable xLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS 1554 Part 1 or IS 7098 Part 1, Armouring strip thickness in average 5 percent and resistivity 14 Ohms Kms Max as per IS 3975. 16 Sqmm, 4 Core.
0.2
148934
29786.82
... More
I521 - Supplying and running GI Copper conductor for grounding and along with other wires in conduit system of wiring using necessary suitable size clamps, nails, guttas spacers etc. 8 SWG GI Wire
250
19
4987.5
... More
I501 - Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class metal only 42 6.11 19 20mm
18
71
1285.2
... More
I133 - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace Chajjas Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400 percent and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats at 1.6kg per m2 to achieve final DFT dry film thickness of 1mm including prime coat of epoxy primer at150 g per m2 and protection with 120gsm Geo textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification.First Floor
1287.215
866
1115281.69245
... More
I008 - Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller in stages to proper grade and camber, applying and brooming requisite type of screening binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density.Using Screening Crushable type such as Moorum or Gravel
45.8486
2649
121459.81869
... More
I541 - Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 g.
20
897
17943.6
... More
I378 - Supply and fixing of fully Enclosed Automatic Transfer Switch ATS Pre wired with Flexible Settings and seamless transfer between two power sources. The enclosure made of MS Power coated of necessary size. The switch comprising of EB DG Priority Source Selection,. Adjustable Time Delay 0.1sec to 3 hours ,.Double Break Contact System offering High Short time Withstand Icw ,.with necessary Terminal Shrouds, Phase Barriers and Source Separator,. Protections for UV OV, Phase Sequence, Single Phasing, Frequency variation. There should be sufficient space for cable termination. Three Phase 415 V. 800 A ACOS
1
98500
98500
... More
I559 - Supply and fixing of GM ball cock with copper float High pressure float of approved brand of manufacture and fixed on to the inlet pipe at the underground sump tank and OHT. 40 mm dia
3
2800
8400
... More
I036 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Terrace Floor
147.079
7101
1044471.22297
... More
I381 - Supplying and fixing Moulded Case Circuit Breaker MCCB over the existing wood panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS 13947. Icu is equal to 100 percent lcs . In 4P MCCB, all Poles should have protection for Short Cicrcuit Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non Priority loads must be available in the MCCB. MCCB shall be provided with double insulation insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open . Multi pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.320 400 A 50 kA
5
31616
158082.75
... More
I074 - Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge.First Floor
1590.2312
134
214172.338016
... More
I319 - Heat Shrinkable Outdoor Type Cable Termination Kit for xLPE Cable 3x95 Sqmm
4
4270
17081.4
... More
I016 - Addendum I Percentage Additionalities for Formwork, Centering and Scaffolding.Percentage on finished rate of concrete per m3.BEAMS AND LINTEL is equal to 60 percent OF CONCRETE QNTY. First Floor
126.195
4354
549478.269
... More
I043 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg m3 and minimum compressive strength of 4.00 N mm2 conforming to IS 2185 Part I 2005 and constructed with CM 1:4 as per IS 2572:2005
including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. First Floor
1530.49
1389
2126248.5374
... More
I412 - Supplying, fixing and wiring 1000 5A to 1600 5A 15VA Burden class 1 Current Transformer
3
590
1770.3
... More
I052 - Providing 12 mm cement plaster with cement mortar 1:6 1 cement: 6 fine sand including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge.Terrace Floor
199.02
258
51375.0228
... More
I220 - FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed wiring system with specified IS 694:1990 and cofirming to Latest amendments. 4 sq.mm
11320
66
748818
... More
I258 - Supplying wall mounting fan suitable to operate at singlephase 230v AC. supply. 400 mm Sweep
8
3372
26980.8
... More
I285 - Supplying fixing of Networking Switches. 24 Port 10 100 1000 Switch
2
7785
15571.5
... More
I367 - Supplying, fixing and wiring 50 5 to 400 5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound.
3
590
1770.3
... More
I092 - Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 thickness to be specified by the manufacturer , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 1 cement : 3 coarse sand and jointing with grey cement slurry at 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete.Ground Floor
847.02
1161
983644.326
... More
I192 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box. 3 Module
498
169
84186.9
... More
I225 - Supplying and fixing regular MCB distribution boards on wall wood board flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB s single phase 3 phase single DOUBLE door with powder coated painting etc.Made out of 14 SWG MS enclosure. 8 Way TP and N
6
6395
38373.3
... More
I466 - Supplying A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic FRP DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete 400 A duble run 4 x 50 x 10 mm Aluminium Strips
5
4667
23336.25
... More
I479 - Supplying, fixing and wiring rotary selector switch suitable for Ammeter
1
210
210
... More
I028 - Addendum I Percentage Additionalities for Formwork, Centering and Scaffolding.Percentage on finished rate of concrete per m3. chajja, corbels etc., including edges including cost of all materials, labour complete as per specificationsChejjas, Canopy and Other Architectural projections of minor sections is equal to 45 percent. Terrace Floor
0.126
3195
402.65064
... More
I323 - Compact RMU VCB SF6 Type with Copper
Busbar, 350 MVA, 630 Amps as per IEC62271 IS 3427 3 Way RMU, 2 OD 1 VL One Incomer One Breaker One Outgoing
1
577027
577027.5
... More
I383 - Supplying and fixing Moulded Case Circuit Breaker MCCB over the existing wood panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS 13947. Icu is equal to 100 percent lcs . In 4P MCCB, all Poles should have protection for Short Cicrcuit Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non Priority loads must be available in the MCCB. MCCB shall be provided with double insulation insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open . Multi pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.160 A 36 kA
5
14119
70596.75
... More
I112 - Providing and fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC Matching to RAL 9016 sections and with minimum TiO2 Titanium Dioxide at 6PHR with TPE Thermo Plastic Elastomer and lead free, gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware and Multi point locking system with touch lock. Wall thickness of frame and sash shall be of 2mm 2.5mm. Maximum possible size 2419mm x 2200mm. The cost is inclusive of all fixtures and separate charges for minor T and P s shall not be made Terrace Floor
9.72
7212
70108.6104
... More
I128 - Providing and fixing stainless steel Grade 304 railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature wherever required and fitting the same with necessary stainless steel nuts and bolts complete, i c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in charge, for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc. including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge.First Floor
1477.4178
599
885239.197404
... More
I551 - Supply and delivery at site GM copper alloy Gate Valves confirming to Class I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed females ends confirming to IS 554 1990 body hydraulically tested 1.5HP seat standard tested 1 HP with IS mark. For 32 mm dia GM Copper alloy Gate valves
17
1418
24122.15
... More
I568 - Providing, fixing, testing and commissioning of deep seal PVC multi inlet floor trap of self cleansing design moulded or fabricated with CP grating, rubber ring solvent cement followed by application of leak proof adhesive like FRP paste including making good the floors etc., complete as directed by the Engineer in charge. Standard make confirming to ISI standards,Model as per attached photo catalogue and as per instruction of engineer incharge. 110mm dia inlet 110mm dia out let
4
900
3600
... More
I499 - Providing and filling sand in excavated trench to cover already laid UG cable to a depth of 150mm all round the cable.
75
105
7875
... More
I247 - ELECTRICAL FIxTURES Supplying of .feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours and 70 percent lumen maintenance with CRI greater than 80. Power Input: 220 240Vat 50 60Hz and Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 2 9 10 W
32
578
18513.6
... More
I569 - Providing, fixing, testing and commissioning of PVC gullytrap of 150 x 150 mm size with 100 mm dia outlet making excavation pit in all kinds of soil and laying of 100 mm thick 1:4:8 mix cement concrete bed and constructing chamber with internal clear dimension of 300 x 300 mm using table moulded wire cut bricks in brick work 115 mm thick in cement mortar 1:4 up to a height of 300 mm above gully trap or up to 100 mm above paving level, plastering internal and external surface with cement mortar 1:4 to 15m thick finishing to smooth inside surface with necessary benching and channelling providing 150 x 150 mm size cast iron grating, including 40 mm thick precast RCC cover slab, clearing the surplus material, earth etc. complete as per drawing. Standard make confirming to ISI standards,Model as per attached photo catalogue and as per instruction of engineer incharge. 150mm x 150mm size P S trap
6
4500
27000
... More
I380 - Supplying and fixing Moulded Case Circuit Breaker MCCB over the existing wood panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS 13947. Icu is equal to 100 percent lcs . In 4P MCCB, all Poles should have protection for Short Cicrcuit Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non Priority loads must be available in the MCCB. MCCB shall be provided with double insulation insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open . Multi pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.500 630 A 50 kA
1
43993
43993.95
... More
I361 - Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 75 x 75 x 6 mm
12
582
6993
... More
I235 - Supplying and fixing miniature circuit breakers on existing
MCB distribution boards using necessary fixing materials
and C Type curve, indicator ON OFF, energy cross 3 with
Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 50 63 A TPN
62
3242
201028.8
... More
I104 - Providing and fixing factory made single extruded WPC Wood Polymer Composite solid door window Clerestory windows and other Frames Chowkhat comprising of virgin PVC polymer of K value 58 60 Suspension Grade , calcium carbonate and natural fibres wood powder rice husk wheat husk and non toxic additives maximum toxicity index of 12 for 100 g fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg m3, screw withdrawal strength of 2200 N Face and 1100 N Edge , minimum compressive strength of 58 N mm2 , modulus of elasticity 900 N mm2 and resistance to spread of flame of Class A category with property of being termite borer proof, water moisture proof and fire retardant and fixed in position with M.S hold fast lugs SS dash fasteners of required dia and length complete as per direction of Engineer InCharge. Fixtures shall be paid for separately Size 62 x 100mmFirst Floor
174.299
744
129760.37653
... More
I306 - Analog Phones
6
1850
11100
... More
I311 - Supply and Installation of 420W Power Amplifier
1
48000
48000
... More
I102 - Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets core veneer hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 part I 1991. from manufacturer complete as per spcification. do 40 mm thick both side TeakTerrace Floor
5.76
5312
30601.0368
... More
I536 - Providing and fixing Side operated Single lever wall mixer with L shaped Tubular bend set for overhead shower made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete Class Economy
28
4097
114737.56
... More
I041 - Filling approved earth excluding rock in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
1131.07
454
514240.9755
... More
I127 - Providing and fixing stainless steel Grade 304 railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature wherever required and fitting the same with necessary stainless steel nuts and bolts complete, i c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in charge, for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc. including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge.Ground Floor
1830.98
593
1086228.885
... More
I505 - Supplying Epoxy Resin and covering the cable Joint
5
913
4567.5
... More
I267 - 16 x 100 1000 GbE Base T 802.3at supported PoE Ports 2 x 1GbE SFP Ports Managed Switch with Layer 2 Image, 50 degree operating temperature support
2
20000
40000
... More
I539 - Providing and fixing Towel rail 600mm length made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete Class Economy
28
1338
37473.8
... More
I048 - Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. length of mesh only be measured for paymentPlaster mesh 100mm wideFirst Floor
3110.3
46
145126.598
... More
I337 - Digging of Pit for providing GI Pipe type Earthing Ordinary Soil
8
796
6375.6
... More
I091 - Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 1 cement : 4 coarse sand , joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of the slab upto 0.50 m2.First Floor
33.69
4248
143127.2484
... More
I425 - Supplying, fixing and wiring 0 to 600V 96x96mm AC Voltmeter on existing panel wood board.
3
474
1423.8
... More
I584 - Supplying, installation, testing and commissioning of solar hot water heater comprising of solar Flat Plate Collector FPC of size 2120x1040x100mm and stainlesssteel hot water storage tank with stainlesssteel heat exchanger absorber made of copper sheet and copper tube of following capacity aluminium box collector with appropriate capacity electrical backup arrangement excluding inlet and outlet pipes.SS Model with 100mm thick of 48Kg M3density Rock wool insulation with 22SWG Aluminium cladding. 300 Liters
5
69986
349930
... More
I205 - Supply and fixing one metal Fan box with round hook
209
122
25675.65
... More
I236 - Supplying, fixing and wiring Residual current circuit breaker RCCB 240 450V up to 300mA sensitivity on existing wood panel board. 32 40Amps 2 pole
18
4786
86165.1
... More
I374 - Supplying, fixing and wiring 3 Phase TVSS
1
14000
14000
... More
I423 - Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230 440VAC. 50 Hz 12 24V D.C.
9
540
4866.75
... More
I290 - Supplying and Fixing of Fan
3
1269
3808.35
... More
I394 - Supplying, fixing and wiring rotary selector switch suitable
for Ammeter
1
210
210
... More
I324 - Labour charges for Fixing foundation frame of MS channel 100x50 mm and MS angle 40x40x5 mm welding, fixing in concrete, aligning the RMU on foundation bed, assembly of complete. As per BESCOM Cost data sheet
1
3767
3767.4
... More
I061 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.Ground Floor
6742.9793
105
708012.8265
... More
I021 - Addendum I Percentage Additionalities for Formwork, Centering and Scaffolding.Percentage on finished rate of concrete per m3.BEAMS AND LINTEL is equal to 60 percent OF CONCRETE QNTY. Ground Floor
13.1559
4311
56716.268931
... More
I136 - Providing and laying cinder concrete in cement 1:15 1 cement : 15 cinder of 12.5mm nominal gauge on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications.Ground Floor
40.8206
2117
86451.90771
... More
I195 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box. 8 Module
74
298
22066.8
... More
I216 - Supplying and fixing PVC metal conduit deep junction box. 25mm deep junction box
394
58
23167.2
... More
I491 - Supplying of 1.1 KV LT UG cable xLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS 1554 Part 1 or IS 7098 Part 1, Armouring strip thickness in average 5 percent and resistivity 14 Ohms Kms Max as per IS 3975. 120 Sqmm, 3.5 Core.
0.4
479733
191893.38
... More
I231 - Supplying and fixing regular MCCB distribution Panel
confirming to IS IEC 61439 3 and IK09 tested as per IS IEC 62262 with minimum IP43 protection provided with
Polyurethane PUR gasket, with suitable earthing system, on wall wood board flush mounting using required cl A , bolts, nuts, etc., with provision for fixing of suitable type capacity MCCB s as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440V 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single three phase suitable capacity MCB s as outgoings confirming to IS IEC 60898. 12 Way
4
16305
65221.8
... More
I396 - Supplying, fixing and wiring 3 Phase Digital Ammeter Voltmeter
1
1496
1496.25
... More
I067 - Applying priming coats with primer of approved brand and manufacture, having low VOC Volatile Organic Compound content. With water thinnable cement primer on wall surface having VOC content less than 50 g L as per specifications and as per directions of Engineer in charge.Ground Floor
6742.979
55
375246.78135
... More
I452 - Supplying and fixing Moulded Case Circuit Breaker MCCB over the existing wood panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS 13947. Icu is equal to 100 percent lcs . In 4P MCCB, all Poles should have protection for Short Cicrcuit Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non Priority loads must be available in the MCCB. MCCB shall be provided with double insulation insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open . Multi pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. 125 A 25 kA
5
10858
54290.25
... More
I439 - Supplying, fixing and wiring 3 Phase TVSS
3
14000
42000
... More
I404 - Supply and fixing of 3 pole Capacitor switching contactor with NO NC contacts and inbuilt damping resistor to protect the contactor and capacitor from highest inrush current , fixed on existing wood panel board using necessary bolts, nuts, washers and wiring etc., complete with AC 690V Rating operational voltage, 50HZ frequency and as per IS 60947 4 1. 12.5 KVAR
4
3046
12184.2
... More
I003 - Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery and other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m.
740.0191
107
79256.04561
... More
I093 - Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 thickness to be specified by the manufacturer , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 1 cement : 3 coarse sand and jointing with grey cement slurry at 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete.First Floor
814.605
1172
955458.35055
... More
I176 - Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2x1.5Sqmm Phase and Neutral and 1x1.0 sqmm Earth wire FRLS multi strand PVC insulated copper wire confirming to IS 694: and latest amendments without control switch shall be fixed on the existing plastic sheet gang box, the other end of the wires shall be terminated with sufficient loose length in a wood PVC round block. complete for each outlet. Long point above 6 mts upto 10 mts from tapping point to outlet via switch box
398
582
231934.5
... More
I428 - Supplying, fixing and wiring rotary selector switch suitable for Ammeter
3
210
630
... More
I096 - Polishing in high gloss matt finish melamine clear polish on wood work in required color wooden shade textureGround Floor
31.9679
622
19904.812935
... More
I245 - Supply and laying of Raceways 100mm wide x 40mm Deep MS cold galvanised 16 guage made of CRCA sheet with removable type cover plate maximum length of each section shall not be more than 2.5 Mtrs. Length. etc., as required.
60
610
36600
... More
I154 - Extra for providing mechanical device chain and crank operation for operating rolling shutters: Exceeding 10.00 m² and upto 16.80 m² in the area including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineerin Charge.
19.2599
1036
19959.997365
... More
I407 - Fixing a shunt capacitor of . kVAR capacity with necessary clA, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor. 1 to 20 kVAR
3
361
1083.6
... More
I448 - UPS PANEL Fabricating supplying and mounting MS box made out SWG suitable for floor wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 14 SWG
95000
-
50350
... More
I119 - Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge.First Floor
418.319
121
51018.18524
... More
I026 - Addendum I Percentage Additionalities for Formwork, Centering and Scaffolding.Percentage on finished rate of concrete per m3. chajja, corbels etc., including edges including cost of all materials, labour complete as per specificationsChejjas, Canopy and Other Architectural projections of minor sections is equal to 45 percent. Ground Floor
17.748
3132
55598.80464
... More
I519 - Supplying and running of GI Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm Copper strip
28
598
16758
... More
I561 - Providing and placing on terrace at all floor levels polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 9Rs Lts Capacity : 2500 Liters
4
23861
95445
... More
I300 - Supplying and drawing PVC insulated gas injected physicalfoam jelly flooded co axial TV cable.RG 6.
150
46
6930
... More
I472 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON OFF, energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 40 A DP
5
1113
5565
... More
I538 - Providing and fixing Soap dish wired with 200mm width made of Stainless steel with all concealed fitting arrangements and all necessary accessories complete Class Economy
28
761
21320.32
... More
I375 - MAIN PANEL Fabricating supplying and mounting MS box made out SWG suitable for floor wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 14 SWG
195000
-
103350
... More
I117 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings wooden frames with rawl plugs screws etc.Terrace Floor
204.12
196
40009.5612
... More
I274 - Supplying of shelf
2
868
1736.7
... More
I500 - Providing and laying in position 100mm dia stone ware pipe in existing trench.
55
225
12416.25
... More
I476 - Supplying, fixing and wiring 0 to 600V 96x96mm AC Voltmeter on existing panel wood board.
1
474
474.6
... More
I390 - Supplying, fixing and wiring 50 5 to 400 5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound.
3
590
1770.3
... More
I549 - Supply and delivery at site GM copper alloy Gate Valves confirming to Class I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed females ends confirming to IS 554 1990 body hydraulically tested 1.5HP seat standard tested 1 HP with IS mark. For 20 mm dia GM Copper alloy Gate valves
18
941
16950.96
... More
I342 - Route and Joint indicating slab with MS Anchor rod
30
139
4189.5
... More
I405 - Supply and fixing of 3 pole Capacitor switching contactor with NO NC contacts and inbuilt damping resistor to protect the contactor and capacitor from highest inrush current , fixed on existing wood panel board using necessary bolts, nuts, washers and wiring etc., complete with AC 690V Rating operational voltage, 50HZ frequency and as per IS 60947 4 1. 22 KVAR
3
4806
14420.7
... More
I540 - Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre and post flushing with water 250 ml and 500 ml consumption , having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer in charge
8
6615
52923.2
... More
I032 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technicals pecifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. First Floor
450.3959
7257
3268523.0463
... More
I459 - Supplying, fixing and wiring 0 to 600V 96x96mm AC Voltmeter on existing panel wood board.
1
474
474.6
... More
I474 - Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230 440VAC. 50 Hz
12 24V D.C.
3
540
1622.25
... More
I552 - Supply and delivery at site GM copper alloy Gate Valves confirming to Class I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed females ends confirming to IS 554 1990 body hydraulically tested 1.5HP seat standard tested 1 HP with IS mark. For 40 mm dia GM Copper alloy Gate valves
5
1590
7953.75
... More
I356 - Super vision charges 10 percent of total HT Yard works
1
198502
198502.25
... More
I166 - Providing and fixing Steel work in built up tubular round, square or rectangular hollow tubes etc. trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge.Terrace Floor
4360.85
154
673097.1975
... More
I576 - Earth work excavation for pipeline cables by manual means upto 600mm trench width as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50 m. filling available excavated earth excluding rock in trenches, plinth, sides of foundatings etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage and other appurtenances required to complete the work.in all kinds of soils. Depth upto 1.5m
189.9998
513
97523.097344
... More
I212 - Supplying 2 mm thick heavy gauge PVC conduit pipe with bends metal junction boxes adhesives paste etc and bracing U or J hooks and cement plastering upto the surface of the trick level and run with 18 SWG Gi fish wire run through out the conduit wherever necessary. 20 mm dia 2mm thick
515
71
36771
... More
I354 - First aid kit
4
1700
6800
... More
I202 - Supplying and fixing of modular switch socket stepped electronic fan regulator s dimmer telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293. 16A one way switch
88
189
16632
... More
I012 - Addendum I Percentage Additionalities for Formwork, Centering and Scaffolding.Percentage on finished rate of concrete per m3 COLUMNS is equal to 70 percent OF CONCRETE QNTY. Ground Floor
143.8355
5029
723436.469155
... More
I442 - Supplying, fixing and wiring 0 to 600V 96x96mm AC Voltmeter on existing panel wood board.
3
474
1423.8
... More
I103 - Providing and fixing factory made single extruded WPC Wood Polymer Composite solid door window Clerestory windows and other Frames Chowkhat comprising of virgin PVC polymer of K value 58 60 Suspension Grade , calcium carbonate and natural fibres wood powder rice husk wheat husk and non toxic additives maximum toxicity index of 12 for 100 g fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg m3, screw withdrawal strength of 2200 N Face and 1100 N Edge , minimum compressive strength of 58 N mm2 , modulus of elasticity 900 N mm2 and resistance to spread of flame of Class A category with property of being termite borer proof, water moisture proof and fire retardant and fixed in position with M.S hold fast lugs SS dash fasteners of required dia and length complete as per direction of Engineer InCharge. Fixtures shall be paid for separately Size 62 x 100mmGround Floor
174.299
737
128475.7929
... More
I161 - Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 1 cement : 4 coarse sand C.I. cover with frame light duty 600x850 mm internal dimensions, total weight of cover with frame to be not less than 38 kg weight of cover 23 kg and weight of frame 15 kg , R.C.C. top slab with 1:1.5:3 mix 1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size , foundation concrete 1:5:10 1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size , inside plastering 12 mm thick with cement mortar 1:3 1 cement : 3 coarse sand , finished smooth with a floating coat of neat cement on walls and bed concrete etc.complete as per standard design: Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets : With common burnt clay non modular bricks of class designation3.5
8
7771
62168.4
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements