Tata Institute Of Fundamental Research Tender

Removing white or colour wash by scrapping, sand papering the surface smooth including necessary repairs, etc. complete.

Dismantling doors, windows and Clearstory windows (steel or wood) shutters including chowkhats, architrave, holdfasts, etc.; complete and stacking within 100m lead. of area 3sqm and below.

Dismantling doors, windows and Clearstory windows (steel or wood) shutters including chowkhats, architrave, holdfasts, etc.; complete and stacking within 100m lead of area beyond 3sqm.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 100m lead of area 3sqm and below.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 100m lead of area beyond 3sqm.

Dismantling steel work in single sections in channels, angles, tees and flats including dismembering and stacking within 50m lead.

Dismantling of wooden storages, racks, shelves, kitchen cabinets, wardrobes etc., and stacking within 100m lead.

Demolishing RCC work manually / by mechanical means including stacking of steel bars and disposal of unserviceable materials within 50m lead.

Demolishing Cement Concrete 1:3:6 or richer mix manually / by mechanical means including disposal of materials within 50m lead

Extra for cutting reinforcement bars in RCC orR.B. work (Reinforced area considering 1%reinforcement) including stacking of serviceablematerials and disposal of unserviceable materials within 50m lead. NOTE: Rate is cost per sqm of sectional area of the RCC work.

Dismantling STONE RUBBLE MASONRY in cement mortar manually / by mechanical means including stacking of serviceable materials and disposal of unserviceable materials within 50mlead.

Providing and constructing BRICK MASONRY in cement mortar as per mixes stipulated below using approved well burnt bricks of class designation (Classification as per IS: 1077) as specified below including raking out joints 10mm deep, scaffolding, curing, etc.; complete as per specifications IN SUPERSTRUCTURE UPTO FLOOR FIVE LEVEL. (The mix ratio specified is for Cement : fine aggregate (Crushed stone sand produced by crushed hard stone / rock as per IS: 2116)) Using BRICKS of class designation '3.5' (minimum average compressive strength not less than 3.5N/sqmm) in cement mortar 1:6

Providing and constructing HALF BRICK MASONRY walls/partitions in mixes stipulated below using approved well burnt bricks of class designation (Classification as per IS: 1077) as specified below including scaffolding, raking out joints, curing, etc.; all as directed by the Engineerin- charge in FOUNDATION AND PLINTH. (The mix ratio specified is for Cement : fine aggregate as per IS: 2116) Using BRICKS of class designation '3.5' (minimum average compressive strength not lessthan 3.5N/sqmm) in cement Mortar 1:4 {Using fine aggregate Uncrushed sand by natural disintegration of hard stone / rock from streams or glacial sources as per IS: 2116)}

Plastering 12mm thick with cement mortarspecified below, finished smooth with lime neeru,including scaffolding, curing, etc.; complete forINTERNAL SURFACES of walls, beam, ribs, sills, jambs, ceiling, etc.; complete all as per specifications UPTO FLOOR FIVE LEVEL, mixspecified is for cement : fine aggregate as per IS: 1542. NOTE: CM 1:3 OR CM 1:4 is generally applicable for ceilings and RCC surfaces unless otherwise specified: With CM 1:6 (Cement: Fine aggregate Uncrushed sand by natural disintegration of hard stone / rock from streams or glacial sources as per IS: 1542))

Providing and constructing SIZE STONE MASONRY using hard granite stones obtained from approved quarry with edges of stones hammer dressed in courses not less than 20cm with bond stones at 2m apart in each course including curing, raking out joints and simultaneously flush pointing with the same mortar etc.; complete all as per specifications IN FOUNDATION AND PLINTH. (The mix ratio specified is for Cement : fine aggregate as per IS: 2116) In Cement Mortar 1:5 {Using fine aggregate (Uncrushed sand by natural disintegration of hard stone / rock from streams or glacial sources as per IS: 2116)}

Providing and constructing SIZE STONE MASONRY using hard granite stones obtained from approved quarry, with edges of all stones chisel dressed to obtain uniform size and shape and in courses not less than 20cm with bond stones 2m apart in each course including raking out joints, curing, scaffolding, etc.; complete as per specifications IN SUPERSTRUCTURE UPTO FLOOR FIVE LEVEL. (The mix ratio specified for cement : fine aggregate as per IS: 2116).The dressing on stones and quoins shall be as follows: Dressing: Face stones shall be hammer dressed on all beds and joints, so as to give them approx. rectangular block shape. These shall be squared on all joints and beds. The bed joints shall be rough chisel dressed for at least 5cm back from the face, and the side joints for at least 4cm such that no portion of the dressed surface is more than 6mm from a straight edge placed on it. The remaining portion of the stone shall not project beyond the surface of bed and side joints. The bushing on the face shall not project more than 4cm on an exposed face and 1cm on a face to be plastered. The hammer dressed stone shall also have a rough tooling for a minimum width of 2.5cm along the four edges of the face of the stone.Quoins: The quoins which shall be of the same height as the course in which these occur, shall be formed of stones of at least 25cm long, laid stretchers and headers alternately. These shall be laid square on the beds, which shall be rough chisel dressed to a depth of at least 10 cm. These stones shall have a minimum of 2.5cm wide chisel drafts at four edges. All the edges being in the same plane.In Cement Mortar 1:5 {Using fine aggregate (Uncrushed sand by natural disintegration of hard stone / rock from streams or glacial sources as per IS: 2116)}

Providing and laying cement concrete using 20mm nominal size graded hard granite stone aggregate obtained from approved quarry including compaction, finishing top surface to level, curing, cost of formwork, etc.; complete all as per specifications. Mix ratio specified is for Cement : fine aggregate as per IS: 383 : graded hard granite stone aggregate. IN FOUNDATION AND PLINTH / SUB-BASE TO FLOORS. PCC 1:2:4 (Using fine aggregate (Uncrushed sand by natural disintegration of hard stone / rock from streams or glacial sources as per IS: 383))

Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. With granite stone of all colour except black, cherry/ruby redof area less than 0.50 sqm.

Providing, fabricating and fixing Stainless Steel (Grade 316) hand rail made out of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement all as per specifications, drawings, and the directions of Engineer-in-charge. (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and laying 16 to 18mm thick +1mm tolerance mirror polished granite stone slabs flooring of approved colour and shade using mirror polished granite stone slabs of size 1800mm x 1200mm / 1800mm x 2400mm and smaller sizes as per the site conditions (cut from the bigger sizes of mirror polished water jet cut stone slab stone slab of approximate size 6.5ft x 10.5ft) approved colour / texture and pattern of RANDOM GRANITE SLABS, water cut quality, machine cut to required size, laid over a bed of 20mm thick cement mortar 1:6 (cement : fine aggregate as per IS: 1542) and cement slurry at the rate of 4.4kg/sqm for bedding and jointing including grouting the joints with pigments to match the shade of the slabs, finishing to required level, curing, cleaning, mopping, etc.; complete all as per specifications at all heights in all floors.for kitchen platform, shelves, dado, floor cut to required size from bigger gang size slabs of coloures granite approved by dept.. (Using fine aggregate (Uncrushed sand by natural disintegration of hard stone / rock from streams or glacial sources as per IS: 1542)

Providing and fixing SINTEX INDIANA series/ Kommerling Profine India Window Technology Pvt. Ltd./ Fenesta / SAINTGOBAIN/ Eroline or equivalent UPVC partittion cum door made out of hollow multi Chambered extruded UPVC sections reinforced with steel tube wherever required. The corners shall be mitre cut and welded. The outer frame made of Sintex DWUF 401 / Kommerling Profine India Window Technology Pvt. Ltd./ Fenesta or equivalent having overall dimension of 60x70 mm and maximum wall thickness of 1.5 mm +/- 0.3 mm with concealed steel reinforcement of MS tube of size 27 x 20 mm/ channel 28x28mm of wall thickness of 1 mm +/- 0.2 mm. The shutter frame made out of Sintex section DWUF 405 having overall dimensions 106x60 mm and maximum wallthickness of 1.9 +/- 0.3mm / Kommerling profineIndia window technology Pvt. Ltd./ Fenesta or equivalent with steel reinforcement of 22 x 18 mm x 1 mm +/- 0.2 mm. Suitable snap-fit glazing bead with sintex code GL-19 of size 35x20 mm x 1.7mm +/-0.3 mm / Kommerling profine India window technology Pvt. Ltd./ Fenesta or equivalent will be provided to fix the glass with necessary EPDM gasket. Outer frame sintex code DWUF 401 along with snap fit mullion bead with SIntex code DWUF 403 od size 76x2 x 1.5 mm +/-0.3 mm / Kommerling profine India window technology Pvt. Ltd./ Fenesta or equivalent is used as fix mullion for the window. Hardware fittings such as powder coated hinges, EBCO/HATTICH for equivalent make powder coated window handles, powder coated tower bolts and EBCO/HATTICH or equivalent make friction stays are to be provided. The work has to be carried out as per manufacturers specifications and through authorized agency of manufacturer for: Fully openable side hung/ top hung single shutterUPVC partittion cum door with 5mm thick Tougned glass

Providing and fixing SINTEX INDIANA series/ Kommerling Profine India Window Technology Pvt. Ltd./ Fenesta / SAINTGOBAIN/Eroline or equivalent UPVC openable windows made out of hollow multi Chambered extruded UPVC sections reinforced with steel tube wherever required. The corners shall be mitre cut and welded. The outer frame made of Sintex DWUF 401 / Kommerling Profine India Window Technology Pvt. Ltd./ Fenesta or equivalent having overall dimension of 60x70mm and maximum wall thickness of 1.5 mm +/- 0.3 mm with concealed steel reinforcement of MS tube of size 27 x 20 mm/channel 28x28mm of wall thickness of 1 mm +/- 0.2 mm. The shutter frame made out of Sintex section DWUF 405 having overall dimensions 78x60 mm and maximum wallthickness of 1.9 +/- 0.3mm / Kommerling profineIndia window technology Pvt. Ltd./ Fenesta or equivalent with steel reinforcement of 22 x 18 mm x 1 mm +/- 0.2 mm. Suitable snap-fit glazing bead with sintex code GL-19 of size 19 x 19.5 mm x 1.7mm +/-0.3 mm / Kommerling profine India window technology Pvt. Ltd./ Fenesta or equivalent will be provided to fix the glass with necessary EPDM gasket. Outer frame sintex code DWUF 401 along with snap fit mullion bead with SIntex code DWUF 403 od size 92x55 x 1.5 mm +/-0.3 mm / Kommerling profine India window technology Pvt. Ltd./ Fenesta or equivalent is used as fix mullion for the window with necessacry sliding three track shutters( mesh shutter dimension 52x22x2mm and glass shutter dimension 66x42x2mm). Hardware fittings such as powder coated hinges, EBCO/HATTICH for equivalent make powder coated window handles, powder coated tower bolts and EBCO/HATTICH or equivalent make friction stays are to be provided. The work has to be carried out as per manufacturers specifications and through authorized agency of manufacturer for: Fully openable side hung/ top hung single shutterUPVC window/ ventilators with 5mm thick Tougned glass

Supplying and fixing HYDRAULIC DOOR CLOSER conforming to IS 3564 Everite/ ozone or equivalent make of size specified below, inclusive of making adjustments and sorting it for smooth operation, etc.; complete all as per specifications. Size 3 (To carry a door width up to 1000mm)

Design supply & installation of suspended SPIDER GLAZING SYSTEM designed to withstand the wind pressure as pr IS: 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21mm thick. The Glass fins and glass panel assembly shall be connected to Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bimetallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8mm) and gaps at the perimeter & in U channel of the assembly to be filled with non-staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured.

Providing and laying 1st quality vitrified glazed tile Plain series of size 300mm (±5mm) x 600/450mm (±5mm) x 9 to 9.5mm (±0.5mm) thick flooring / dadoing of first/premium quality, size, colour and thickness according to the dimensions of tiles and having scratch hardness and other parameter conforming to IS: 15622 - Group B II/B III, respectively for flooring and dadoing, of Kajaria / Somany/ Johnsons/ Spartek or equivalent make laid over a bed / backing as specified below, with cement slurry at 3.30kg /sqm, close jointed and pointed with matching white cement slurry mixed with approved pigment and finishing to required level, curing etc., complete all as per specification and as directed by Engineer-in-charge at all floors. in dado with approved colour glossy printed wall tiles of size 300mm X 600/450mm as per IS:15622 Group B III, over a backing of 12mm thick in CM 1:3 (cement : fine aggregate (Uncrushed sand by natural disintegration of hard stone / rock from streams or glacial sources as per IS: 1542)

Providing and laying 1st quality Ceramic tile flooring / dadoing of first/premium quality, size, colour and thickness according to the dimensions of tiles and having scratch hardness and other parameter conforming to IS: 15622 - Group B II/B III, respectively for flooring and dadoing, of Kajaria / Somany/ AGL/ Navin / Bell/ Regency/ Johnsons/ Spartek or equivalent make laid over a bed / backing as specified below, with cement slurry at 3.30kg /sqm, close jointed and pointed with matching white cement slurry mixed with approved pigment and finishing to required level, curing etc., complete all as per specification and as directed by Engineer-in-charge at all floors. in flooring with approved glossy antiskid plain ceramic floor tiles of size 300mm X 300mm/306mmx306mm as per IS:15622 Group B II, over bed of 20mm thick in CM 1:4 (cement : fine aggregate (Uncrushed sand by natural disintegration of hard stone / rock from streams or glacial sources as per IS: 1542)

Providing and laying vitrified tile flooring / skirting using first/premium quality vitrified tiles as per IS:15622 - Group B I a, of specified sizes of Kajaria / Somany/ AGL/ Navin / Bell/ Regency/ Johnsons/ Spartek or equivalent make and approved colour with straight edge laid with a gap of 5 to 8mm thick BAL-CEM Adhesive (gold star) of M/s. Bal-Endura Adhesives Ltd. or equivalent, and joints grouted using the mixture of Bal-grout and Bal-GT1 or equivalent of approved shade / colour having paper joint and finishing to required level, etc., complete all as per specifications and as directed by Engineer-in-charge at all levels for:Vitrified tile, Polished Double charged with NanoTech in LIGHT SERIES of size 600mm (±5mm) x 1200mm (±5mm) x 11.5 to 12.55mm (±0.5mm) thick.

Providing and laying vitrified tile flooring / skirting using first/premium quality vitrified tiles as per IS:15622 - Group B I a, of specified sizes of Kajaria / Somany/ AGL/ Navin / Bell/ Regency/ Johnsons/ Spartek or equivalent make and approved colour with straight edge laid with a gap of 5 to 8mm thick BAL-CEM Adhesive (gold star) of M/s. Bal-Endura Adhesives Ltd. or equivalent, and joints grouted using the mixture of Bal-grout and Bal-GT1 or equivalent of approved shade / colour having paper joint and finishing to required level, etc., complete all as per specifications and as directed by Engineer-in-charge at all levels for:Vitrified tile, Polished Double charged with NanoTech in LIGHT SERIES tiles for skirting/Dadoing of size 600mm (±5mm) x 600mm (±5mm) x 9 to 9.5mm (±0.5mm) thick.

Providing and laying gang saw cut 30 mm thick, flamed finish machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring, kerbs and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge

Taking out existing stone slab up to 75mm thick from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Laying available stone slab flooring upto 75mm thick of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer- in-charge. (Old stone slab shall be supplied by the department free of cost).

Providing and fixing of Glass Blocks of Solaris or approved equivalent make of size 190mm x 190mmx 80mm / 145x145x95mm (approximate weight 2.5-2.8 kg per block) with 10 mm joint to achive a 200 mm module with mortar grout of white cement and marble powder in proportion of 1: 2 respectively including 8mm dia steel reinforcement bars to be laid in horizontal and vertical joints as per manufacturers specification. Glass block panels shall be supported on all sides by fabricated colour anodized (Grade AC 25) aluminium frames of nominal dimension 80mm x 40mm x 2mm size (aluminium frame to be paid separately in the aluminium work) and block should rest on top of the cement mortar 1:3( 1 cement : 3 sand) . Aluminium frames shall not be load-bearing and shall be fixed to the surrounding structure. All joints shall be raked 10mm for grout where specified, complete as per drawing and instructions of the Engineer-In-Charge ( Basic cost of Glass block Rs. 250/-).

Providing and laying in position REINFORCED CEMENT CONCRETE using graded hard granite stone aggregate of 20mm nominal size obtained from approved quarry including mechanical mixing, vibrating, compaction, finishing, curing, etc.; complete all as per specifications but excluding the cost of form works and steel reinforcement. (Rate to include labour for keeping embedment if any, wherever required while casting). Mix ratio is specified is for cement : fine aggregate as per IS: 383 : graded stone aggregate UPTO FLOOR FIVE LEVEL IN beams, suspended floors, roofs having slope up to 15⁰, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases etc., with: RCC 1:1.5:3 (Using fine aggregate (Uncrushed sand by natural disintegration of hard stone / rock from streams or glacial sources as per IS: 383))

Providing rigid and water tight CENTERING AND SHUTTERING using best quality wood/ plywood/ steel forms and centring with steel props, acro tubes etc., including strutting, propping, bracing, staging etc., complete for all RCC items fixed in position as required including labour for careful removal of form work etc., complete all as per specifications AT ALL HEIGHTS. In horizontal / vertical/ slanting surfaces. Lintels, beams, plinth beams, girders, bressumers and cantilevers, brackets etc.

Steel reinforcement for all RCC items including decoiling, straightening, cutting, hooking, bending, cranking, fabricating to required shape, placing in position and tying the system with soft drawn annealed GI binding wire of diameter not less than 1.00mm with 2 strands etc.; complete as per specifications AT ALL HEIGHTS (binding wire will not be measured for payment). Thermo-Mechanically Treated (TMT) bars- Fe500D

Pointing on Stone work with Cement Mortar 1:3 (cement : fine aggregate as per IS: 1542) including raking out joints, scaffolding, curing, finishing neat, etc.; complete all as per specifications for HEIGHTS UP TO 10M ABOVE GROUND LEVEL. Flush pointing. (Using Fine aggregate (Uncrushed sand by natural disintegration of hard stone / rock from streams or glacial sources as per IS: 1542))

Providing and applying PLASTER OF PARIS PUTTY (BIRLA PUTTY or equivalent) of 2mm thickness over plastered surface to prepare the surface even and smooth complete. Cost to include scaffolding charges also.

Providing and laying cement concrete using 20mm nominal size graded hard granite stone aggregate obtained from approved quarry including compaction, finishing top surface to level, curing, cost of formwork, etc.; complete all as per specifications. Mix ratio specified is for Cement : fine aggregate as per IS: 383 : graded hard granite stone aggregate. IN FOUNDATION AND PLINTH / SUB-BASE TO FLOORS. PCC 1:2:4 (Using fine aggregate (Uncrushed sand by natural disintegration of hard stone / rock from streams or glacial sources as per IS: 383))

Providing and Fixing best Indian make Stainless Steel kitchen Sink with Drain board comprising of NIrali make/ Equivalent: A) Best Indian make stainless steel kitchen sink of approved make of overall size 915 X 457 X 200mm, Bowl size 428 X 357 X 200mm, 1mm thick supported on a pair of painted CI brackets conforming to IS: 775.B) One 40mm heavy quality CP brass wastecoupling. C) One 32mm PVC waste pipe bent to shape length not exceeding 1m. To discharge in to the floor trap.

Painting INTERNAL plastered surfaces with TWO or more coats of ROYAL EMULSION PAINT of approved brand and colour (Asian or Berger or equivalent) to give an even shade with required finish over a coat of water thinnable cement primer including cleaning the surfaces, filling the crevices with approved filler, applying a coat of approved putty on whole surface and rubbing the surface to achieve desired smooth surface, scaffolding, etc., complete all as per specifications and directions of Engineer-incharge.Finishing with Royal Emulsion paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm

French spirit polishing on wood work with ONE or more coats with readymade superior quality French spirit polish of approved brand and manufacture on OLD WORK all complete as per specifications.

Painting EXTERNAL plastered surfaces with TWO or more coats of 100% ACRYLIC EXTERIOR EMULSION PAINT of approved make and colour (apcolite apex of Asian or weather coat of Berger or equivalent) having protection against fungal growth, flaking, fading, alkali and UV degradation and to give an even shade with required finish including cleaning the surfaces, applying one coat of primer, filling the crevices with approved filler, scaffolding, etc., complete all as per specifications.

Dismantling the existing 15 mm CP brass screw down bib taps/stop cock and shifting / stacking the same at place as directed by Engineer-In-Charge etc., including all charges for dismantling carefully with out damaging complete all as per specifications

Dismantling the vitreous Chinawarre fittings and shifting / stacking the same at place as directed by Engineer In Charge etc., complete all as per specifications

Dismantling the existing GI pipe line of 20 mm carefully with out damaging including removal of GI specials and stacking in position as directed by Engineer In Charge etc., complete.

Providing and Fixing European Water Closet Suite (With conceled polymer Cistern) comprising of: A) Jaquar or equivalant make white glazed vitreous Chinaware European water closet, with wash down pattern of approved make with trap as mentioned below conforming IS:2556-Part-II bearing ISI mark fixed to wall with SS bolts etc., B) Jaquar make approved quality and make polymer conceled flushing cistern with all internal fittings conforming to IS fixed to wall with necessary brackets, screws and plugs with matching chromium plated flush bend.C) 15mm heavy quality flexible PVC inlet connection with CP brass hexagonal check nuts and washers at both ends. D) White plastic seat and cover of approved make with multi closing pillar hinges E) 15mm NB CP brass angle-cock/stop cock conforming to IS:781 of Jaquar approved make with a minimum weight of 400gm on the inlet to the EWC Complete all as specified above with approved fittings. of specifications for PH Engg works). With "P" Trap Note: The item of EWC is of "Jaquar" make with 1) Model No. OPS-WHT-15961BIUFSMTL OPAL EWC Wall Mounted with Jet Sp and seat cover or equivalent. 2) Model No. ALD-CHR-805B CONNECTION PIPE or equivalent. 3) Code No. of Concealed Cistern as JCS- WHT- 2400FP CONCEALED CISTERN SLAMP or equivalent. 4) Code No. for Cover plate JCP-SSF152415 or equivalent.

Providing and Fixing Best quality Jaquar make wash hand basin (with GI waste pipe) comprising of: A) Best Indian make white glazed vitreous chinaware wash hand basin of approved make of size mentioned below conforming to IS:2556 Part-IV with single tap hole and bearing ISI mark supported on a pair of painted CI brackets conforming to IS:775. B) One 15mm CP brass pillar cock of approved make with hot or cold water indication as required conforming to IS:1795 with minimum weight of 577gm. C) Two nos 15mm heavy quality flexible PVC inlet pipe connection with CP brass hexagonal check nuts with washer at both ends. D) Two nos 15mm CP brass angle-cock/stop cock of approved make conforming to IS:781 of approved make with a minimum weight of 400gm on the inlet to the basin. Note: It is form of "Jaquar" brand with code no. of JDS-WHM- 25911, wash bowl 42cm basin with overflow or equivalent. waste coupling-ALD-CHR-727L130, Bottle trap- ALD-SSF-769L300X190, PILLAR COCK- DRC-CHR-73021, CONNECTION PIPE- ALD-CHR-805B. ANGLE COCK MODEL: CON-CHR-059KN

Providing and Fixing in position of approved make stain less steel floor drainer with popup of jaquar/prestige / equivalen,, all as per specifications, site condition and directions of Engineer - In - Charge etc complete.

Supply, Laying and Fixing in position under floor, against wall in chases PVC SWR Drainage pipes and specials, rubber rings conforming to Type 'B' of IS:13592 'Supreme' or equivalent approved make as per manufacturers specification including cutting the pipes to required lengths, necessary excavation, chasing and restoring to original conditions, testing etc. complete. (Specials at junction of lateral pipe and vertical stack must have access door for inspection) 75mm dia (min wall thickness 3.2mm)

Supply, Laying and Fixing in position under floor, against wall in chases PVC SWR Drainage pipes and specials, rubber rings conforming to Type 'B' of IS:13592 'Supreme' or equivalent approved make as per manufacturers specification including cutting the pipes to required lengths, necessary excavation, chasing and restoring to original conditions, testing etc. complete. (Specials at junction of lateral pipe and vertical stack must have access door for inspection) 110mm dia (min wall thickness 3.2mm)

Providing and fixing Approved make Tissue paper holder Jaquar or equivalent for bath room including necessary charges for materials, labour etc., complete and as directed by E In C. MODEL- AQN-CHR-7753.

Providing and fixing Approved make of Angular stop cock with wall flange jaquaror equivalent for inside of the toilet and bothroom including necessary charges for materials, labour etc., complete and as directed by E In C. MODEL: CON-CHR-059KN

Providing and fixing the mirror of required shape and size 1175x750mm 6mm thick with necessary bracket of approved make including necessary charges for beveled edge and polish,materials, labour etc., complete and as directed by E In C

Providing and fixing Approved make Towel rail of Jaquar or equivalent for bath room including necessary charges for materials, labour etc., complete and as directed by E In C. MODEL- ACN-CHR-1101S

Providing and fixing Approved make Connection hose pipes of Jaquar or equivalent including necessary charges for materials, labour etc., complete and as directed by E In C. CONNECTION PIPE- ALD-CHR-805B.

Providing and fixing Approved make of Water spout with wall flange Jaquar/Kohler or equivalent for inside of the toilet and bothroom including necessary charges for materials, labour etc., complete and as directed by E In C. MODEL: DRC-CHR-37037

Supply and installation of approved make health fAucet flex tube all as per specifications, site condition and directions of Engineer - In - Charge etc complete. MODEL:ADL CHR-573