Rural Drinking Water And Sanitation Department Tender

The Rural Drinking Water And Sanitation Department has issued a formal invitation for competitive bids for Augmentation Of Mvs For Rural Water Supply Of Beeralli And Other 2 Villages In Siruguppa Taluk Ballari Dist in Ballari, Karnataka, with an estimated contract value of Rs. 2,34,86,782. The bid opening date for this tender is 15-03-2024 and the last date for bid submission is 25-03-2024. Interested bidders for Rural Drinking Water And Sanitation Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Rural Drinking Water And Sanitation Department Tender

Civil And Construction

Water Storage And Supply

Ballari, Karnataka

Opening Date15 Mar 2024

Closing Date25 Mar 2024

Tender Amount₹ 2,34,86,782.36

Email

Download

Costs

EMD
₹ 3,53,000
Document Cost
Refer Documents
Tender Fee
₹ 5,000

Description

Unlock the Tender details for free

Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Tender Id
RWSSD/2023-24/WS/WORK_INDENT2177/CALL-6
Bid Award Id
View
Tender No
RWSSD/2023-24/WS/WORK_INDENT2177/CALL-6
Tender Authority
Rural Drinking Water And Sanitation Department View
Purchaser Address
-
Website
http://https://jalshakti-ddws.gov.in/

Unlock the Tender details for free

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

Request Call Back

Documents

Tender Notice-31.0 MBbeeralli new.doc

Tender Document

Tender Notice-276.0 kBloc.pdf

Instructions to Tenderers

Tender Notice-115.5 kBTENDER CONDITIONS....TENDER CONDITIONS.docx

Instructions to Tenderers

Document-110.6 kBTender_Detail.html

Report Missing Document

BOQ Items

DO_NOT_SHOW

Quantity-

Rate-

Amount -

View all details for FREE

code177 - Supply and delivery at site brand new best make pressure guage suitable for centrifugal pump confirming to latest IS standards. 80 mm

Quantity2

Rate575

Amount 1150

code168 - Supply and delivery at site brand new best make starter/ control panel suitable for following HP centrifugal pump confirming with ISI mark andits latest amendments 7.5 HP

Quantity2

Rate9500

Amount 19000

code161 - Providing,Supplying and fixing suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps,bolts,nuts and washers etc. with necessary materials and labour tools and equipments as per instructions of engineer incharge of work. 3.5x6 Sqm

Quantity2

Rate540

Amount 1081.5

code87 - Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.

Quantity2

Rate5225

Amount 10451.7

code172 - Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work.

Quantity2

Rate6457

Amount 12915

code16 - Automatic Online Hydraulically Operated Self Cleaning Multi grade Pressure Filter for the flow rate of ........................... LPH (............... M.L.D) with 16 hour pumping NOTE : For Detailed Specification of Automatic hydraulic self cleaning screen filter(400 Microns), FILTRATION & Filter Media For Pressure Filter, Anthracite, Carbon. Detailed Specification and Rates fot Separate components ( i.e.., Online Sensore, Filtration & Filder media) of 10000 LPH to 225000 LPH Refer Annexure-C For WTP 45000 LPH For WTP 45000 LPH 0.76 MLD

Quantity1

Rate1458250

Amount 1458250

code31 - Providing and laying in position Reinforced cement concrete for top dome of water tank over the staging above the ground level. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials of quality, confirming to he requirements of relevant IS codes with plastering and smooth finishing in cement mortar 1:3, 12 mm thick for both inside and outside surface, labour, centering, scaffolding, staging, strutting, plywood/ steel form work , Usage charges of machinery, curing and all other appurtenances required to complete the work as per design & technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately). (Minimum cement content: 360 kgs (7.20 bags)) - RCC M30 Design Mix with 20mm aggregate for level and 12-15 m height for (12 -15 m height)

Quantity3.94

Rate29424

Amount 115933.318

code07 - Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications : Stone/Boulder

Quantity96

Rate1716

Amount 164808

code18 - Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including scrapping the surface with wire brushes etc. before removal of scaffolding for new RCC over head tanks and cleaning of paint stains wherever necessary with all lead and lifts etc. complete for: Qty. same as Sl no. 1

Quantity231.53

Rate141

Amount 32819.3775

code47 - Providing 80 mm dia CI bank flange confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. 100mm dia

Quantity1

Rate250

Amount 250

code91 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, plywood / steel formwork, cost of all materials of quality, labour, Usage charges of machineries, curing and all the other appurtenances required to complete the work as per technical specifications. ( The cost of steel reinforcement shall be paid separately). PCC 1:2:4 using 40 mm aggregate in foundations incld. shutter, compaction, curing etc..

Quantity3.36

Rate6868

Amount 23078.328

code38 - Providing and fixing RCC final and ventilators as per approved design and specifications with form works and protected with wire mesh. The plinth to be of RCC circular pillars and canopy with an ornamental finish at top. The first 22.5 cms height to be covered with RCC panelling as per detailed drawings etc. with all lead and lifts and excluding reinforcement steel.

Quantity1

Rate6037

Amount 6037.5

code101 - Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an angle of 70 degrees to horizontal including necessary 25mm dia., G.I.shutters with necessary G.I. fasteners for bracing the ladders to the Tank walls to prevent buckling of the ladder with necessary (M-15) bed for embedding the ladder bottom complete

Quantity5.3

Rate5355

Amount 28381.5

code115 - Providing 80 mm dia Duck foot bend confirming to IS 1538 (Part I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete.150m dia

Quantity2

Rate800

Amount 1600

code178 - Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments 50 mm

Quantity2

Rate1250

Amount 2500

code53 - printing new letter and figure of any shade with synthetic enamel paint black or any other approved colour to give an even shade

Quantity4000

Rate1

Amount 5040

code176 - Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments.1x3x6 Sq.mm

Quantity30

Rate210

Amount 6300

code39 - Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. including painting with anticorrosive approved paint etc. complete including all lead and lifts etc.

Quantity1

Rate2216

Amount 2216.55

code82 - Providing Duck foot bend confirming to IS 1538 1978 with latest amendments if any cost of all materials, labour charged etc complete as per specification.80mm

Quantity3

Rate350

Amount 1050

code135 - Restoration Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) - Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates

Quantity104.364

Rate6014

Amount 627686.8416

code116 - Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS1865 and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 105% leak proof with face to face dimensions as per IS 14846-2000 only. The stem sealing should be with toroidal sealing rings (minimum 2 “ O “ rings). Body and bonut should be coated with Electrostatically applied Epoxy Powder Coating with minimum coating thickness of 250 micron both inside and outside. The rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc. but excluding earth work. (Note: TP set should be considered only for DI pipes estimate. For MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR rates of valves and provision for corresponding dia MS flanges should be made in the estimate.) For PN-10: 100mm dia

Quantity2

Rate8858

Amount 17716

code42 - Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm dia. pipe suitably jointed by collars with all specials with all lead and lifts etc. complete for:upto 15 m staging

Quantity1

Rate13022

Amount 13022.1

code99 - Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including scrapping the surface with wire brushes etc. before removal of scaffolding for new RCC over head tanks and cleaning of paint stains wherever necessary with all lead and lifts etc. complete for: Tanks staging above 6 m and upto 9 m

Quantity632.97

Rate160

Amount 101686.6305

code94 - Providing and laying in position Reinforced cement concrete for shell portion, bottom dome / slab and ribs over the staging. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes with plastering and smooth finishing the exposed faces in cement mortar 1:3, 12 mm thick and CM plastering 1:3 proportion 20mm thick for inside with an admixture of water proof compound of requisite proportion of approved quality, labour,centering, scaffolding, staging, strutting, plywood/ steel form work , Usage charges of machinery, curing and all other appurtenances required to complete the work as per design and technical specifications.(Contractor will make his own arrangements for procuring water for testing). (The cost of steel reinforcement, dowel bars to be paid separately). (Minimum cement content: 360 kgs (7.20 bags)). - M30 Design Mix with 20mm aggregate for level 6 to 9 m height.

Quantity22.97

Rate24600

Amount 565079.2275

code04 - Renovation of impounding reservoir:Clearing Grass and Removal of Rubbish & dumping to outside periphery by manual means

Quantity0.55

Rate29873

Amount 16430.4525

code198 - Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia.

Quantity1

Rate3937

Amount 3937.5

code100 - Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed, including hand railing on both sides with 25mm dia. GI pipes with angle iron props at 2 Mtr. intervals and 0.5M heigh, including fixing in ground with CC 71:2:4 and two coats of anticorrosive bituminous paint etc. with all lead and lifts etc. complete with: MS angle of 65 x 65 x 8mm

Quantity17.8

Rate4539

Amount 80796.87

code127 - Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc - For Grade PE100 PN10.0 75mm dia

Quantity1654

Rate296

Amount 489931.34

code184 - Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work.

Quantity2

Rate6457

Amount 12915

code120 - Supplying and fixing SFRC frame and cover conforming to IS 12592 (partI)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixing the cover in C.C. 1:2:4 and C.M. 1:3 plastering 20 mm thick to all exposed faces, curing for 10 days with all lead and lift with appurtenances. complete.- Heavy Duty

Quantity2

Rate2536

Amount 5073.6

code68 - Providing and fixing RCC final and ventilators as per approved design and specifications with form works and protected with wire mesh. The plinth to be of RCC circular pillars and canopy with an ornamental finish at top. The first 22.5 cms height to be covered with RCC panelling as per detailed drawings etc. with all lead and lifts and excluding reinforcement steel.

Quantity1

Rate6037

Amount 6037.5

code86 - Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm dia. pipe suitably jointed by collars with all specials with all lead and lifts etc. complete for:upto 9 m staging

Quantity1

Rate9036

Amount 9036.3

code196 - Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work.

Quantity1

Rate6457

Amount 6457.5

code171 - Supplying and fixing LT cable of size 4 x 25 Sqm suitable for centrifugal pump sets with ISI mark and its latest amendments.

Quantity20

Rate682

Amount 13650

code180 - Supply and delivery at site brand new best make starter/ control panel suitable for following HP centrifugal pump confirming with ISI mark andits latest amendments . Upto 7.5 HP

Quantity2

Rate9500

Amount 19000

code48 - Providing 80 mm dia Bell mouthed pipes (flanged) confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete.100mm .

Quantity1

Rate420

Amount 420

code189 - Supply and delivery at site brand new best make pressure guage suitable for centrifugal pump confirming to latest IS standards.80mm.

Quantity1

Rate575

Amount 575

code109 - Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DIflanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying to work spot with all lead and lifts etc.complete.150 mm dia outlet & scour valve

Quantity24

Rate4942

Amount 118616.4

code141 - Thrust Block: Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing andb technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work.

Quantity41.6

Rate195

Amount 8124.48

code29 - Providing and laying in position Reinforced cement concrete for side walls of water tank over the staging above the ground level. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes with plastering and smooth finishing the exposed faces in cement mortar 1:3, 12 mm thick & CM plastering 1:3 proportion 20mm thick for inside with an admixture of water proof compound of requisite proportion of approved quality, labour,centering, scaffolding, staging, strutting, plywood/steel form work, Usage charges of machinery, curing and all other appurtenances required to complete the work as per design and technical specifications.(Contractor will make his own arrangements for procuring water for testing). (The cost of steel reinforcement, dowel bars to be paid separately). (Minimum cement content: 360 kgs (7.20 bags)). - RCC M30 Design Mix with 20mm aggregate for level upto 12-15 m height.

Quantity14.94

Rate28904

Amount 431836.218

code21 - Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an angle of 70 degrees to horizontal including necessary 25mm dia., G.I.shutters with necessary G.I. fasteners for bracing the ladders to the Tank walls to prevent buckling of the ladder with necessary (M-15) bed for embedding the ladder bottom complete

Quantity6.3

Rate5355

Amount 33736.5

code02 - Supply and fixing of Cast steel ASTM A 216 Gr.WCB double flanged Dual plate check valve Conforming to API 594 with latest amendments Shaft material shall be SS420/431 and spring shall be spring steel superior grade quality as detailed below of following diameters and types and conveying to work site, loading, unloading, stacking with appurtenances., complete with all lead and lift. The rates are inclusive of cost of Galvanised Bolts and Nuts: For Class 150 : 250mm. dia.

Quantity1

Rate23144

Amount 23144.1

code134 - Supply and fixing of Single / Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/50. All internal parts such as float, shell with appurtenances., all cover bolts of austenitic alloy / SS 304 steel, DN 50 float of HOSTAFLON / SS 304 and gaskers and seals of EPDM. Epoxy powder coating (EP-P) inside and outside colour blue RAL5005. The valves should be designed for all the three functions i.e., 1. Large orifice for venting of large air volumes on start up. 2. Large orifice for intake of large air volumes. 3. Small orifice for discharge of pressurized air during operation. For PN 10.0 50MM.

Quantity3

Rate24089

Amount 72267.3

code138 - Repair of Pump House -6mX4mX3m: Providing plastering in cement mortar 1:3 proportion with minimum 2% of approved quality water proof compound, including scaffolding, racking out joints 25mm deep, smooth finishing, curing etc. with all lead and lifts for all materials etc. complete for: 20mm thick plastering

Quantity127.15

Rate353

Amount 44992.0275

code30 - Providing and laying in position Reinforced cement concrete for side walls of water tank over the staging above the ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes with plastering and smooth finishing the exposed faces in cement mortar 1:3, 12 mm thick and CM plastering 1:3 proportion 20mm thick for inside with an admixture of water proof compound of requisite proportion of approved quality, labour, centering, scaffolding, staging, strutting, plywood/ steel form work , Usage charges of machinery, curing and all other appurtenances required to complete the work as per design and technical specifications.(Contractor will make his own arrangements for procuring water for testing). (The cost of steel reinforcement, dowel bars to be paid separately). (Minimum cement content: 360 kgs (7.20 bags)). - RCC M30 Design Mix with 20mm aggregate for level upto 12 to 15 m height.

Quantity8.5

Rate30637

Amount 260416.2

code35 - Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed, including hand railing on both sides with 25mm dia. GI pipes with angle iron props at 2 Mtr. intervals and 0.5M heigh, including fixing in ground with CC 71:2:4 and two coats of anticorrosive bituminous paint etc. with all lead and lifts etc. complete with: MS angle of 65 x 65 x 8mm

Quantity27.9

Rate4539

Amount 126642.285

code145 - Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttresses, plinth and string courses cost of all materials, labour complete as per specificaitons As per Appendix 1 of CSR 21-2022 shuttering rate is 5% of Concrete rates

Quantity5.5

Rate297

Amount 1634.325

code157 - Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipments including providing cement concrete foundation bed etc., complete as per specification, with testing of as per instructions of engineer incharge of work

Quantity2

Rate1417

Amount 2835

code167 - Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments (RDW&S CIRCLE KLB SR 2019-20 It.No.12.06 )50mm.

Quantity2

Rate1275

Amount 2550

code146 - Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately)

Quantity362.88

Rate96

Amount 35054.208

code05 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, plywood / steel formwork, cost of all materials of quality, labour, Usage charges of machineries, curing and all the other appurtenances required to complete the work as per technical specifications. ( The cost of steel reinforcement shall be paid separately). P&L PCC 1:3:6 :(20mm aggregates) in foundations incld. shutter, compaction, curing etc..

Quantity2.09

Rate6014

Amount 12570.096

code09 - Providing and fixing RCC precast fencing pole of size 0.15m x 0.15m x2.0m casted in CC 1:1.5:3 with 20mm downsize aggregate making holes for drawing barbed wire at 30cm c/c using 10 mm dia vertical 4 TMT steel rods and 8mm dia stirrups at 15cm c/c fixed 1.5m above ground level using steel moulding, curing, transportation to work spot including excavation in hard soil fixing in plain cement concrete 1:2:4 using 20mm downsize aggregate including aligning to plumb and line providing including cost of all materials, labour, hire charge of machineries lead, lift loading & unloading etc.,Complete.

Quantity80

Rate1880

Amount 150444

code139 - Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

Quantity103.15

Rate141

Amount 14621.5125

code20 - Repair of Clear Water Sump: Providing plastering in cement mortar 1:3 proportion with minimum 2% of approved quality water proof compound, including scaffolding, racking out joints 25mm deep, smooth finishing, curing etc. with all lead and lifts for all materials etc. complete for: 20mm thick plastering

Quantity161.87

Rate353

Amount 57277.6995

code25 - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work - Depth upto 3 m Ordinary Rock (not requiring blasting) - 20%

Quantity9.06

Rate285

Amount 2587.536

code188 - Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments.1X3X6 Sqmm.

Quantity15

Rate210

Amount 3150

code70 - Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick, 0.23 M width with copper floats indicators and flexible nylone wires, painting figures with approved enamel paint etc. with all lead and lifts, complete for: MS gauge sheet for 2.5 m depth

Quantity1

Rate5760

Amount 5760.3

code85 - Providing CI bank flange confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete.80MM

Quantity1

Rate200

Amount 200

code193 - Supply, delivery, erection and commissioning at site lighting distribution board suitable for monoblock centrifugal pump confirming with ISI mark and its latest amendments.

Quantity1

Rate4725

Amount 4725

code77 - Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DIflanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying to work spot with all lead and lifts etc.complete.80mm dia over flow

Quantity15

Rate2315

Amount 34728.75

code108 - Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DIflanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying to work spot with all lead and lifts etc.complete. 100mm dia inlet and outlet pipe

Quantity30

Rate3075

Amount 92263.5

code03 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, plywood / steel formwork, cost of all materials of quality, labour, Usage charges of machineries, curing and all the other appurtenances required to complete the work as per technical specifications. ( The cost of steel reinforcement shall be paid separately)- Mix 1:3:6 (M10) Using 20mm nominal sie graded crushrd coarse aggregates.

Quantity0.084

Rate6014

Amount 505.2096

code34 - Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including scrapping the surface with wire brushes etc. before removal of scaffolding for new RCC over head tanks and cleaning of paint stains wherever necessary with all lead and lifts etc. complete for: Tanks staging above 12 m and upto 15 m (for level upto 21-24 height add 42/- )

Quantity605.86

Rate205

Amount 124685.988

code133 - Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS1865 and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 105% leak proof with face to face dimensions as per IS 14846-2000 only. The stem sealing should be with toroidal sealing rings (minimum 2 “ O “ rings). Body and bonut should be coated with Electrostatically applied Epoxy Powder Coating with minimum coating thickness of 250 micron both inside and outside. The rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc. but excluding earth work. (Note: TP set should be considered only for DI pipes estimate. For MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR rates of valves and provision for corresponding dia MS flanges should be made in the estimate.) For PN-16: 150 mm dia

Quantity8

Rate17212

Amount 137696

code111 - Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc. complete .150 mm dia puddle flamge

Quantity2

Rate2429

Amount 4859.4

code137 - Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & painting with two or more coats with black Japan paint etc. complete as directed by the engineer-in-charge.

Quantity15

Rate2536

Amount 38052

code33 - Labour charges for fabricating mild steel or torsteel bars of all sizes for reinforcement for RCC works including conveying steel to work spot with all lead including cleaning, straightening, bending, fabricating, placing in position and tieing as per design including cost of binding wire, hoisting etc. with all lifts etc. complete (excluding the cost of steel) for

Quantity10.37

Rate13354

Amount 138490.8315

code107 - Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm dia. pipe suitably jointed by collars with all specials with all lead and lifts etc. complete for:upto 9 m staging

Quantity1

Rate9036

Amount 9036.3

code01 - Canal Offtake: Cutting road surfaces for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the classifications for: Pipe inlet at Canal wall

Quantity0.084

Rate998

Amount 83.8782

code173 - Supply and delivery at site brand new best make Foot valve suitable for centrifugal pump upto 10HP confirming with ISI mark and its latest amendments.

Quantity2

Rate950

Amount 1900

code41 - Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick, 0.23 M width with copper floats indicators and flexible nylone wires, painting figures with approved enamel paint etc. with all lead and lifts, complete for Extra for MS Guage sheet for every 0.5 m beyond 2.5 m depth

Quantity0.5

Rate1077

Amount 538.65

code19 - Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost offittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will makehis own arrangements for procuring water for testing) For Heavy Duty GI pipe: For Medium Duty GI pipe:Inlet Pipe, Overflow Pipe & Outlet/Scour Pipe of 65mm dia

Quantity3

Rate695

Amount 2085.06

code125 - Cutting road surfaces for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the classifications for:Cutting in Cement Concrete Road Surface - upto 200mm dia

Quantity52.182

Rate998

Amount 52106.3361

code49 - Providing 80 mm dia Duck foot bend confirming to IS 1538 (Part I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. 100mm dia

Quantity2

Rate420

Amount 840

code08 - Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. (Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade)

Quantity640

Rate796

Amount 509920

code58 - Providing and laying in position Reinforced cement concrete M30 Design Mix for flat or sloping floor slabs resting on the ground The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes with plastering and smooth finishing the exposed faces in cement mortar 1:3, 12 mm thick, labour, centering, scaffolding, strutting, plywood/ steel form work , Usage charges of machinery, curing and all other appurtenances required to complete the work as per design andtechnical specifications. (The cost of steel reinforcement, dowel bars to be paid separately). (Minimum cement content: 360 kgs (7.20 bags))

Quantity10.72

Rate10817

Amount 115966.28

code45 - Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc. complete 100 mm dia CI puddle flange

Quantity2

Rate1897

Amount 3794.7

code80 - Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc. complete .80mm dia

Quantity4

Rate1602

Amount 6409.2

code103 - Providing and fixing RCC final and ventilators as per approved design and specifications with form works and protected with wire mesh. The plinth to be of RCC circular pillars and canopy with an ornamental finish at top. The first 22.5 cms height to be covered with RCC panelling as per detailed drawings etc. with all lead and lifts and excluding reinforcement steel.

Quantity1

Rate6037

Amount 6037.5

code148 - Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments.1X3X6 Sqm

Quantity30

Rate210

Amount 6300

code10 - Water Treatment Plant Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work i) In Ordinary soil - 65%

Quantity11.26

Rate76

Amount 863.079

code56 - 50kl oht 9m stg Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work - Depth upto 3 m (Ordinary / Hard Soil )

Quantity47.13

Rate76

Amount 3612.5145

code54 - Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.

Quantity3

Rate5225

Amount 15677.55

code75 - Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS1865 and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 105% leak proof with face to face dimensions as per IS 14846-2000 only. The stem sealing should be with toroidal sealing rings (minimum 2 “ O “ rings). Body and bonut should be coated with Electrostatically applied Epoxy Powder Coating with minimum coating thickness of 250 micron both inside and outside. The rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc. but excluding earth work. (Note: TP set should be considered only for DI pipes estimate. For MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR rates of valves and provision for corresponding dia MS flanges should be made in the estimate.) For PN-10: 100mm outlet

Quantity1

Rate8858

Amount 8858

code60 - Providing and laying in position Reinforced cement concrete for shell portion, bottom dome / slab and ribs over the staging. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes with plastering and smooth finishing the exposed faces in cement mortar 1:3, 12 mm thick and CM plastering 1:3 proportion 20mm thick for inside with an admixture of water proof compound of requisite proportion of approved quality, labour, centering, scaffolding, staging, strutting, plywood/ steel form work, Usage charges of machinery, curing and all other appurtenances required to complete the work as per design and technical specifications.(Contractor will make his own arrangements for procuring water for testing). (The cost of steel reinforcement, dowel bars to be paid separately). (Minimum cement content: 360 kgs (7.20 bags)). - M30 Design Mix with 20mm aggregate for level 6 to 9 m height.

Quantity6.94

Rate24600

Amount 170729.205

code129 - Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc - For Grade PE100 PN10.125 mm dia

Quantity563

Rate719

Amount 404999.68

code59 - Providing and laying in position Reinforced cement concrete for columns, braces and ring beam above ground level. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted Providing and laying in position Reinforced cement concrete for columns, braces and ring beam above ground level. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted - RCC M30 Design Mix with 20mm aggregate for level 6m to 9m height.

Quantity6.12

Rate16383

Amount 100266.714

code187 - RWS to Cogaulant dosing system Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments.2 HP, Head 12 M, Discharge 275 LPM

Quantity1

Rate15425

Amount 15425

code153 - Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at the location of respective pump sets.

Quantity2

Rate550

Amount 1100

code158 - Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tools and equipments,as per specificationswith testing of as per instructions of engineer incharge of work. .3.5X6 Sqmm.

Quantity30

Rate157

Amount 4725

code112 - Providing 80 mm dia CI bank flange confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete.100 mm dia

Quantity1

Rate250

Amount 250

code149 - Supply and delivery at site brand new best make pressure guage suitable for centrifugal pump confirming to latest IS standards.80mm.

Quantity2

Rate575

Amount 1150

code24 - Construction of 50KL OHT 22M Staging: Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work - Depth upto 3 m (Ordinary / Hard Soil ) 80%

Quantity36.24

Rate76

Amount 2777.796

code44 - Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DIflanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying to work spot with all lead and lifts etc.complete. 150 mm dia for outlet pipe 150mm dia for score

Quantity50

Rate4942

Amount 247117.5

code92 - Providing and laying in position Reinforced cement concrete M30 Design Mix for flat or sloping floor slabs resting on the ground The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes with plastering and smooth finishing the exposed faces in cement mortar 1:3, 12 mm thick, labour, centering, scaffolding, strutting, plywood/ steel form work , Usage charges of machinery, curing and all other appurtenances required to complete the work as per design andtechnical specifications. (The cost of steel reinforcement, dowel bars to be paid separately). (Minimum cement content: 360 kgs (7.20 bags))

Quantity20.79

Rate10817

Amount 224901.0225

code83 - Providing Duck foot bend confirming to IS 1538 1978 with latest amendments if any cost of all materials, labour charged etc complete as per specification.100mm

Quantity1

Rate420

Amount 420

code52 - Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS 1865 and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 105% leak proof with face to face dimensions as per IS 14846-2000 only. The stem sealing should be with toroidal sealing rings (minimum 2 “ O “ rings). Body and bonut should be coated with Electrostatically applied Epoxy Powder Coating with minimum coating thickness of 250 micron both inside and outside. The rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc. but excluding earth work. (Note: TP set should be considered only for DI pipes estimate. For MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR rates of valves and provision for corresponding dia MS flanges should be made in the estimate.) For PN-10: 150 mm dia

Quantity2

Rate14234

Amount 28468

code65 - Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed, including hand railing on both sides with 25mm dia. GI pipes with angle iron props at 2 Mtr. intervals and 0.5M heigh, including fixing in ground with CC 71:2:4 and two coats of anticorrosive bituminous paint etc. with all lead and lifts etc. complete with: MS angle of 65 x 65 x 8mm

Quantity14

Rate4539

Amount 63548.1

code183 - Supplying and fixing LT cable of size 4 x 25 Sqm suitable for centrifugal pump sets with ISI mark and its latest amendments.

Quantity20

Rate682

Amount 13650

code23 - Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will makehis own arrangements for procuring water for testing) For Heavy Duty GI pipe: For Medium Duty GI pipe:Inlet Pipe, Overflow Pipe & Outlet/Scour Pipe of 65mm dia

Quantity3

Rate695

Amount 2085.06

code64 - Labour charges for fabricating mild steel or torsteel bars of all sizes for reinforcement for RCC works including conveying steel to work spot with all lead including cleaning, straightening, bending, fabricating, placing in position and tieing as per design including cost of binding wire, hoisting etc. with all lifts etc. complete (excluding the cost of steel) for

Quantity4.06

Rate12134

Amount 49267.491

code123 - Earth work excavation for pipeline trenches in all kinds of soils by Mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & boning rods at every 100 mm whevere necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata. All kinds of soils. Ordinary/soft rock (without requiring blasting) Depth upto 1.50 m - 10%

Quantity827.954

Rate359

Amount 297318.2814

code81 - Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc. complete .100mm dia

Quantity1

Rate1897

Amount 1897.35

code26 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, plywood / steel formwork, cost of all materials of quality, labour, Usage charges of machineries, curing and all the other appurtenances required to complete the work as per technical specifications. ( The cost of steel reinforcement shall be paid separately). PCC 1:2:4 using 40 mm aggregate in foundations incld. shutter, compaction, curing etc..

Quantity2.43

Rate6868

Amount 16690.5765

code14 - Providing and laying in position Reinforced cement concrete M30 Design Mix for flat or sloping floor slabs resting on the ground The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes with plastering and smooth finishing the exposed faces in cement mortar 1:3, 12 mm thick, labour,centering, scaffolding, strutting, plywood/ steel form work , Usage charges of machinery, curing and all other appurtenances required to complete the work as per design andtechnical specifications. (The cost of steel reinforcement, dowel bars to be paid separately). (Minimum cement content: 360 kgs (7.20 bags))

Quantity10.79

Rate10817

Amount 116723.6304

code43 - Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DIflanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying to work spot with all lead and lifts etc.complete. 100 mm dia for inlet 100 mm dia Over flow

Quantity56

Rate3075

Amount 172225.2

code142 - Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour complete as per specifications

Quantity41.6

Rate128

Amount 5328.96

code95 - Providing and laying in position Reinforced cement concrete for side walls of water tank over the staging above the ground level. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes with plastering and smooth finishing the exposed faces in cement mortar 1:3, 12 mm thick and CM plastering 1:3 proportion 20mm thick for inside with an admixture of water proof compound of requisite proportion of approved quality, labour, centering, scaffolding, staging, strutting, plywood/ steel form work , Usage charges of machinery, curing and all other appurtenances required to complete the work as per design and technical specifications. (Contractor will make his own arrangements for procuring water for testing). (The cost of steel reinforcement, dowel bars to be paid separately). (Minimum cement content: 360 kgs (7.20 bags)). - RCC M30 Design Mix with 20mm aggregate for level upto 6 to 9 m height.

Quantity11.31

Rate25918

Amount 293137.6695

code104 - Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. including painting with anticorrosive approved paint etc. complete including all lead and lifts etc.

Quantity1

Rate2216

Amount 2216.55

code114 - Providing 80 mm dia Duck foot bend confirming to IS 1538 (Part I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete.100m dia

Quantity2

Rate420

Amount 840

code40 - Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick, 0.23 M width with copper floats indicators and flexible nylone wires, painting figures with approved enamel paint etc. with all lead and lifts, complete for MS Guage sheet for 2.5 m depth

Quantity1

Rate5760

Amount 5760.3

code11 - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work ii) In Ordinary/soft rock - 25%

Quantity4.33

Rate285

Amount 1236.648

code96 - Providing and laying in position Reinforced cement concrete for top dome of water tank over the staging above the ground level. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials of quality, confirming to he requirements of relevant IS codes with plastering and smooth finishing in cement mortar 1:3, 12 mm thick for both inside and outside surface, labour,centering, scaffolding, staging, strutting, plywood/ steel form work , Usage charges of machinery, curing and all other appurtenances required to complete the work as per design and technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately). (Minimum cement content: 360 kgs (7.20 bags)) - RCC M30 Design Mix with 20mm aggregate for level and 6 -9 m height.

Quantity5.31

Rate25089

Amount 133225.3512

code73 - Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade

Quantity1600

Rate1

Amount 2016

code166 - Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments 50mm

Quantity2

Rate1250

Amount 2500

code121 - Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work.

Quantity1461.096

Rate358

Amount 523145.4228

code67 - Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an angle of 70 degrees to horizontal including necessary 25mm dia., G.I. shutters with necessary G.I. fasteners for bracing the ladders to the Tank walls to prevent buckling of the ladder with necessary (M-15) bed for embedding the ladder bottom complete as per specification and drawing .

Quantity3.375

Rate5355

Amount 18073.125

code154 - Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/25/40 Amps with scalable box.

Quantity2

Rate1250

Amount 2500

code22 - Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including scrapping the surface with wire brushes etc. before removal of scaffolding for new RCC over head tanks and cleaning of paint stains wherever necessary with all lead and lifts etc. complete for:Qty. same as Item no.9.16 & 9.18

Quantity161.87

Rate141

Amount 22945.0725

code102 - Supplying and fixing 40mm dia. GI pipe medium duty pipes hand railing 3 rows fixed to RCC 1:2:4 vibrated post of 150x150mm at bottom and 100x150mm at top, placed at 2 Mtr. intervals for a height of 750mm including curing, painting GI pipes with two coats of anticorrosive steel paint over a primer coat etc. with all lead lift etc. (The rate per meter is for 3 rows of GI pipes and RCC post)

Quantity68.07

Rate1152

Amount 78477.903

code61 - Providing and laying in position Reinforced cement concrete for side walls of water tank over the staging above the ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes with plastering and smooth finishing the exposed faces in cement mortar 1:3, 12 mm thick and CM plastering 1:3 proportion 20mm thick for inside with an admixture of water proof compound of requisite proportion of approved quality, labour, centering, scaffolding, staging, strutting, plywood/ steel form work , Usage charges of machinery, curing and all other appurtenances required to complete the work as per design and technical specifications.(Contractor will make his own arrangements for procuring water for testing). (The cost of steel reinforcement, dowel bars to be paid separately). (Minimum cement content: 360 kgs (7.20 bags)). - RCC M30 Design Mix with 20mm aggregate for level upto 6 to 9 m height.

Quantity7.1

Rate25918

Amount 184020.995

code97 - Fe 550 TMT Steel (New revised rate Issued on 8/4/2022)

Quantity9.77

Rate61864

Amount 604411.28

code185 - Supply and delivery at site brand new best make Foot valve suitable for centrifugal pump upto 10HP confirming with ISI mark and its latest amendments.

Quantity2

Rate950

Amount 1900

code66 - Supplying and fixing 40mm dia. GI pipe medium duty pipes hand railing 3 rows fixed to RCC 1:2:4 vibrated post of 150x150mm at bottom and 100x150mm at top, placed at 2 Mtr. intervals for a height of 750mm including curing, painting GI pipes with two coats of anticorrosive steel paint over a primer coat etc. with all lead lift etc. (The rate per meter is for 3 rows of GI pipes and RCC post)

Quantity26.28

Rate1152

Amount 30298.212

code15 - Providing Thermo-Mechanically Treated bars of grade Fe-500 or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately)

Quantity971

Rate96

Amount 93798.6

code79 - Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DIflanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying to work spot with all lead and lifts etc.complete.100mm dia outlet

Quantity11

Rate3075

Amount 33829.95

code90 - Earth work excavation for Foundation by mechanical means for all works depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work - Depth upto 3 m (Ordinary rto\ck Blasting) 20%

Quantity12.62

Rate285

Amount 3604.272

code136 - Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.

Quantity15

Rate5225

Amount 78387.75

code128 - Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc - For Grade PE100 PN10.0 110mm dia

Quantity460

Rate573

Amount 263718

code124 - Cutting road surfaces for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the classifications for:Cutting Asphalt Road Surface - upto dia 200mm

Quantity52.182

Rate935

Amount 48818.8701

code175 - Pumping Machinery from CWS to MBT: Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latestamendments.5 HP,80X65 Head 38 M, Discharge 600 LPM

Quantity2

Rate22500

Amount 45000

code117 - Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS1865 and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 105% leak proof with face to face dimensions as per IS 14846-2000 only. The stem sealing should be with toroidal sealing rings (minimum 2 “ O “ rings). Body and bonut should be coated with Electrostatically applied Epoxy Powder Coating with minimum coating thickness of 250 micron both inside and outside. The rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc. but excluding earth work. (Note: TP set should be considered only for DI pipes estimate. For MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR rates of valves and provision for corresponding dia MS flanges should be made in the estimate.) For PN-10: 150mm dia

Quantity1

Rate14234

Amount 14234

code51 - Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS 1865 and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 105% leak proof with face to face dimensions as per IS 14846-2000 only. The stem sealing should be with toroidal sealing rings (minimum 2 “ O “ rings). Body and bonut should be coated with Electrostatically applied Epoxy Powder Coating with minimum coating thickness of 250 micron both inside and outside. The rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc. but excluding earth work. (Note: TP set should be considered only for DI pipes estimate. For MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR rates of valves and provision for corresponding dia MS flanges should be made in the estimate.) For PN-10: 100mm dia

Quantity2

Rate8858

Amount 17716

code118 - Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade

Quantity4000

Rate1

Amount 5040

code126 - Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc - For Grade PE100 PN10.0 63mm dia

Quantity1590

Rate230

Amount 366797.1

code165 - Supply and delivery at site brand new best make pressure guage suitable for centrifugal pump confirming to latest IS standards.80mm.

Quantity2

Rate575

Amount 1150

code151 - Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments (RDW&S CIRCLE KLB SR 2019-20 It.No.12.06 ) 50mm.

Quantity2

Rate1275

Amount 2550

code155 - Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar and other end fitted with protective cover) -80mm

Quantity2

Rate4158

Amount 8316

code162 - arthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia.

Quantity2

Rate3937

Amount 7875

code192 - Supply and delivery at site brand new best make starter/ control panel suitable for following HP centrifugal pump confirming with ISI mark andits latest amendments 50mm 7.5 HP.

Quantity2

Rate9500

Amount 19000

code93 - Providing and laying in position Reinforced cement concrete for columns, braces and ring beam above ground level. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted Providing and laying in position Reinforced cement concrete for columns, braces and ring beam above ground level. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted - RCC M30 Design Mix with 20mm aggregate for level 6m to 9m height.

Quantity26.38

Rate16383

Amount 432195.411

code191 - Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments (RDW&S CIRCLE KLB SR 2019-20 It.No.12.06 )50mm .

Quantity1

Rate1275

Amount 1275

code194 - Supply, delivery, erection and commissioning at site ELCB suitablefor monoblock centrifugal pump confirming with ISI mark and itslatest amendments. (RDW&S CIRCLE KLB SR 2019-20 It.No.12.28 )

Quantity1

Rate4462

Amount 4462.5

code76 - Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DIflanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying to work spot with all lead and lifts etc.complete.80mm dia inlet

Quantity15

Rate2315

Amount 34728.75

code190 - Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments 50mm

Quantity1

Rate1250

Amount 1250

code143 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) - Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates

Quantity0.64

Rate5831

Amount 3732.288

code159 - Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit

Quantity20

Rate141

Amount 2835

code182 - Supply, delivery, erection and commissioning at site ELCB suitablefor monoblock centrifugal pump confirming with ISI mark and itslatest amendments. (RDW&S CIRCLE KLB SR 2019-20 It.No.12.28 )

Quantity2

Rate4462

Amount 8925

code36 - Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an angle of 70 degrees to horizontal including necessary 25mm dia., G.I.shutters with necessary G.I. fasteners for bracing the ladders to the Tank walls to prevent buckling of the ladder with necessary (M-15) bed for embedding the ladder bottom complete

Quantity5.4

Rate5355

Amount 28917

code122 - Earth work excavation for pipeline trenches in all kinds of soils by Mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & boning rods at every 100 mm whevere necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata. All kinds of soils. Depth upto 1.50 m - 90%

Quantity7451.59

Rate203

Amount 1517888.883

code130 - Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc - For Grade PE100 PN10.0 140mm dia

Quantity7329

Rate887

Amount 6502655.25

code27 - Providing and laying in position Reinforced cement concrete M30 Design Mix for flat or sloping floor slabs resting on the ground The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes with plastering and smooth finishing the exposed faces in cement mortar 1:3, 12 mm thick, labour, centering, scaffolding, strutting, plywood/ steel form work , Usage charges of machinery, curing and all other appurtenances required to complete the work as per design andtechnical specifications. (The cost of steel reinforcement, dowel bars to be paid separately). (Minimum cement content: 360 kgs (7.20 bags))

Quantity17.16

Rate10817

Amount 185632.59

code57 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, plywood / steel formwork, cost of all materials of quality, labour, Usage charges of machineries, curing and all the other appurtenances required to complete the work as per technical specifications. ( The cost of steel reinforcement shall be paid separately). PCC 1:2:4 using 40 mm aggregate in foundations incld. shutter, compaction, curing etc..

Quantity2.96

Rate6868

Amount 20330.908

code12 - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the workii) In Hard rock not exceeding 3m - 25%

Quantity4.33

Rate486

Amount 2105.0295

code170 - Supply, delivery, erection and commissioning at site ELCB suitablefor monoblock centrifugal pump confirming with ISI mark and itslatest amendments. (RDW&S CIRCLE KLB SR 2019-20 It.No.12.28 )

Quantity2

Rate4462

Amount 8925

code63 - Fe 550 TMT Steel (New revised rate Issued on 4/1/2023)

Quantity4.06

Rate61864

Amount 251167.84

code144 - Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) - M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

Quantity5.5

Rate6240

Amount 34320.825

code150 - Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments 50mm.

Quantity2

Rate1250

Amount 2500

code88 - Supplying and fixing SFRC frame and cover conforming to IS 12592 (partI)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixing the cover in C.C. 1:2:4 and C.M. 1:3 plastering 20 mm thick to all exposed faces, curing for 10 days with all lead and lift with appurtenances. complete.- Heavy Duty

Quantity2

Rate2536

Amount 5073.6

code110 - Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc. complete .100mm dia puddle flange

Quantity2

Rate1897

Amount 3794.7

code62 - Providing and laying in position Reinforced cement concrete for top slab of water tank over the staging above the ground level. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes with plastering and smooth finishing in cement mortar 1:3, 12 mm thick for both inside and outside surface, labour,centering, scaffolding, staging, strutting, plywood/ steel form work , Usage charges of machinery, curing and all other appurtenances required to complete the work as per design and technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately). (Minimum cement content: 360 kgs (7.20 bags)) - RCC M30 Design Mix with 20mm aggregate for level and 6 -9 m height.

Quantity2.97

Rate19914

Amount 59146.659

code17 - Repair of Raw Water Sump: Providing plastering in cement mortar 1:3 proportion with minimum 2% of approved quality water proof compound, including scaffolding, racking out joints 25mm deep, smooth finishing, curing etc. with all lead and lifts for all materials etc. complete for: 20mm thick plastering

Quantity34.32

Rate353

Amount 12144.132

code28 - Providing and laying in position Reinforced cement concrete for columns, braces and ring beam above ground level. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted Providing and laying in position Reinforced cement concrete for columns, braces and ring beam above ground level. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted - RCC M30 Design Mix with 20mm aggregate for level 12m to15m height.

Quantity41.87

Rate20027

Amount 838538.864

code186 - Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia.

Quantity2

Rate3937

Amount 7875

code37 - Supplying and fixing 40mm dia. GI pipe medium duty pipes hand railing 3 rows fixed to RCC 1:2:4 vibrated post of 150x150mm at bottom and 100x150mm at top, placed at 2 Mtr. intervals for a height of 750mm including curing, painting GI pipes with two coats of anticorrosive steel paint over a primer coat etc. with all lead lift etc. (The rate per meter is for 3 rows of GI pipes and RCC post)

Quantity139.5

Rate1152

Amount 160829.55

code131 - Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS1865 and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 105% leak proof with face to face dimensions as per IS 14846-2000 only. The stem sealing should be with toroidal sealing rings (minimum 2 “ O “ rings). Body and bonut should be coated with Electrostatically applied Epoxy Powder Coating with minimum coating thickness of 250 micron both inside and outside. The rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc. but excluding earth work. (Note: TP set should be considered only for DI pipes estimate. For MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR rates of valves and provision for corresponding dia MS flanges should be made in the estimate.) For PN-16: 50mm dia

Quantity4

Rate5638

Amount 22552

code06 - Providing plastering in cement mortar 1:3 proportion with minimum 2% of approved quality water proof compound, including scaffolding, racking out joints 25mm deep, smooth finishing, curing etc. with all lead and lifts for all materials etc. complete for: 20mm thick plastering

Quantity1983.24

Rate353

Amount 701769.474

code32 - Providing and Supplying of Reinforcment Steel TMT Fe 550 (Rate Exclusive of Taxes) As per SE Circular bangalore no : 138 - Dated 08.04.22 Item no 1 4th quarter dt 4/1/2023

Quantity10.37

Rate61864

Amount 641529.68

code179 - Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments (RDW&S CIRCLE KLB SR 2019-20 It.No.12.06 ) 50 mm

Quantity2

Rate1275

Amount 2550

code152 - Supply and delivery at site brand new best make starter/ control panel suitable for following HP centrifugal pump confirming with ISI mark andits latest amendments 7.5 to 10HP

Quantity2

Rate15550

Amount 31100

code50 - Providing 80 mm dia Duck foot bend confirming to IS 1538 (Part I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. 150mm dia

Quantity2

Rate800

Amount 1600

code71 - Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick, 0.23 M width with copper floats indicators and flexible nylone wires, painting figures with approved enamel paint etc. with all lead and lifts, complete for: Extra for MS Guage sheet for every 0.5 m beyond 2.5 m depth

Quantity0.5

Rate1077

Amount 538.65

code74 - Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS1865 and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 105% leak proof with face to face dimensions as per IS 14846-2000 only. The stem sealing should be with toroidal sealing rings (minimum 2 “ O “ rings). Body and bonut should be coated with Electrostatically applied Epoxy Powder Coating with minimum coating thickness of 250 micron both inside and outside. The rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc. but excluding earth work. (Note: TP set should be considered only for DI pipes estimate. For MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR rates of valves and provision for corresponding dia MS flanges should be made in the estimate.) For PN-10: 80mm inlet

Quantity2

Rate8013

Amount 16026

code98 - Labour charges for fabricating mild steel or torsteel bars of all sizes for reinforcement for RCC works including conveying steel to work spot with all lead including cleaning, straightening, bending, fabricating, placing in position and tieing as per design including cost of binding wire, hoisting etc. with all lifts etc. complete (excluding the cost of steel) for

Quantity9.774

Rate12134

Amount 118606.0239

code140 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One coats on old work as per specifications and as per directions of Engineer in charge.

Quantity2.1

Rate52

Amount 110.25

code163 - Pumping Machinery from CWS to Dual Media filter Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments.3 HP, Head 30 M, Discharge 175 LPM

Quantity2

Rate19258

Amount 38516

code46 - Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc. complete 150 mm dia CI puddle flange

Quantity2

Rate2429

Amount 4859.4

code195 - Supplying and fixing LT cable of size 4 x 25 Sqm suitable for centrifugal pump sets with ISI mark and its latest amendments.

Quantity10

Rate682

Amount 6825

code13 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) - Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates

Quantity2.39

Rate6014

Amount 14374.416

code147 - Pumping Machinery from Jackwell to IR Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. 10 HP, Head 50 M, Discharge 425 LPM

Quantity2

Rate55860

Amount 111720

code197 - Supply and delivery at site brand new best make Foot valve suitable for centrifugal pump upto 10HP confirming with ISI mark and its latest amendments.

Quantity1

Rate950

Amount 950

code106 - Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick, 0.23 M width with copper floats indicators and flexible nylone wires, painting figures with approved enamel paint etc. with all lead and lifts, complete for: MS Guage sheet forExtra for MS Guage sheet for every 0.5 m beyond 2.5 m depth

Quantity1

Rate1077

Amount 1077.3

code119 - Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.

Quantity2

Rate5225

Amount 10451.7

code181 - Supply, delivery, erection and commissioning at site lighting distribution board suitable for monoblock centrifugal pump confirming with ISI mark and its latest amendments.

Quantity2

Rate4725

Amount 9450

code84 - Providing Bell mouthed pipes (flanged) confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete.80MM.

Quantity1

Rate320

Amount 320

code132 - Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS1865 and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 105% leak proof with face to face dimensions as per IS 14846-2000 only. The stem sealing should be with toroidal sealing rings (minimum 2 “ O “ rings). Body and bonut should be coated with Electrostatically applied Epoxy Powder Coating with minimum coating thickness of 250 micron both inside and outside. The rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc. but excluding earth work. (Note: TP set should be considered only for DI pipes estimate. For MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR rates of valves and provision for corresponding dia MS flanges should be made in the estimate.) For PN-16: 100mm dia

Quantity2

Rate10137

Amount 20274

code89 - 100 KL 9M STG Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work - Depth upto 3 m (Ordinary / Hard Soil )

Quantity50.49

Rate76

Amount 3870.0585

code156 - Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work.

Quantity2

Rate6457

Amount 12915

code174 - Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia.

Quantity2

Rate3937

Amount 7875

code113 - Providing 80 mm dia Bell mouthed pipes (flanged) confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. 100mm dia

Quantity1

Rate420

Amount 420

code160 - Providing main connection from pole PVC insulated sheathed steel wire cable in GI pipe as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board uni

Quantity20

Rate84

Amount 1680

code164 - Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x6 Sqmm

Quantity30

Rate210

Amount 6300

code55 - Supplying and fixing SFRC frame and cover conforming to IS 12592 (part I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixing the cover in C.C. 1:2:4 and C.M. 1:3 plastering 20 mm thick to all exposed faces, curing for 10 days with all lead and lift with appurtenances. complete.- Heavy Duty

Quantity3

Rate2536

Amount 7610.4

code72 - Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including scrapping the surface with wire brushes etc. before removal of scaffolding for new RCC over head tanks and cleaning of paint stains wherever necessary with all lead and lifts etc. complete for: Tanks staging above 6 m and upto 9 m

Quantity300.98

Rate160

Amount 48352.437

code78 - Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DIflanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying to work spot with all lead and lifts etc.complete.80mm dia scour

Quantity11

Rate2315

Amount 25467.75

Evaluation Notes How It Works ?

Partners

Payment Type

Bank Certification Amount

Bank Guarantee Amount

Additional Info 1

Additional Info 2

Additional Info 3

Additional Info 4

Remarks

Potential Partner

Select Your Requirements

Help me get relevant partners for joint bidding

Help me get relevant material suppliers

Help me get project financing

Related Tenders

Narmada Water Resources Water Supply And Kalpsar Department

Panch Mahals, Gujarat

Closing Date31 Jul 2025

Tender Amount₹ 31.3 Cr

Tender For Epc Work

Water Resources Department

Niwari, Madhya Pradesh

Closing Soon14 Jul 2025

Tender Amount₹ 7.8 Lac

Repair And Maintenance Of Barua Nallah Tank, Water Resources Division Niwari, District Niwar

Public Works Department

South Andaman, Andaman & Nicobar Islands

Closing Soon15 Jul 2025

Tender Amount₹ 39.9 Lac

Up Gradation Of Existing Pipe Line Increasing The Existing Dia To Get Sufficient Water From Saithankhari School To Rubber Board Plantation

Military Engineer Services

Doda, Jammu & Kashmir

Closing Date29 Jul 2025

Tender Amount₹ 10 Lac

Repair Maintenance Of External Water Supply System, Cleaning Of Water Tank Of Various Capacity And Misc Connected Items At Patnitop And Nathatop Under Age (i) Bhalra

National Aluminium Company Limited

Closing Date21 Jul 2025

Tender AmountNA

Defluoridation Water Treatment Plant (for Details, Please Refer The Technical Specification & Drawing – Annexure-a Attached Herewith)

National Aluminium Company Limited

Koraput, Odisha

Closing Soon14 Jul 2025

Tender AmountNA

Construction Of Tank Foundation At 08area In Alumina Refinery, Nalco, Damanjodi

Pey Jal Nigam Uttarakhand

Haridwar, Uttarakhand

Closing Soon17 Jul 2025

Tender AmountNA

Pumping Plant Of Tube Well And Related Works In Kewalpuri Khanpur District Haridwar Under Jal Jeevan Mission Program.

Public Health Engineering Department

West Midnapore, West Bengal

Closing Date25 Jul 2025

Tender AmountNA

Modification Of Chlorination System By Double Tank Method And Other Allied Works At Different Pump Houses

Water Resources Department

Closing Date21 Jul 2025

Tender Amount₹ 22.7 Lac

Improvement To The Nallah Banks In The Property Of Mahesh Thakur And Other At Deulwada V.p. Arambol In Mandrem Constituency.

Water Resources Department

Closing Soon14 Jul 2025

Tender AmountNA

Supply Of Oriented Unplasticized Ployvinyl Chloride Pvc-o Pipes

Municipal Corporation

Closing Date26 Jul 2025

Tender Amount₹ 94.7 Lac

Construction Of High Yield Tube Well

Public Health Engineering Department

Palwal, Haryana

Closing Soon14 Jul 2025

Tender Amount₹ 101 Cr

Palwal Town Estimate For Providing Water Supply In Palwal Town By Construction Of Ranney Wells In Yamuna Flood

NLC India Limited

Chennai, Tamil Nadu

Closing Date30 Jul 2025

Tender Amount₹ 20.3 Lac

Nlcil-btps-civil-bmc-pump House-1 At Ignp

V O Chidambaranar Port Trust

Tuticorin, Tamil Nadu

Closing Date31 Jul 2025

Tender Amount₹ 67.4 Cr

Establishment Of 3 Mld Desalination Plant Based On Sea Water Reverse Osmosis At V.o.chidambaranar Port And Operation And Maintenance For 5 Years On Dbo Mode

Tamilnadu Water Supply And Drainage Board

Kanyakumari, Tamil Nadu

Closing Soon16 Jul 2025

Tender Amount₹ 16.6 Lac

Replacement Of Damaged Pipe Line In Cwss To 79 Coastal Habs In Kanyakumari District

Meghalaya Power Generation Corporation Limited

East Khasi Hills, Meghalaya

Closing Soon15 Jul 2025

Tender AmountNA

Structural Rehabilitation Work And Improvement Of Reservoir, Dam, Outlet And Basic Facilities Of Myntdu Leshka Stage-i

North Bengal Development Department

Darjeeling, West Bengal

Closing Soon18 Jul 2025

Tender AmountNA

Sinking Of 128x80mm Deep Tube Well By Odex-115 Method And Sitc Of Iron Removal Plant With All Allied Works

Delhi Jal Board

New Delhi, Delhi

Closing Soon16 Jul 2025

Tender Amount₹ 27.3 Lac

Provision And Maintenance Of New Sewer Lines With Allied Works Connected To The Existing Substation.

Nagar Panchayat

Pratapgarh, Uttar Pradesh

Closing Soon12 Jul 2025

Tender Amount₹ 9.8 Lac

Work Of Installation Of 10 Hp Tube Well In Ward Sandila.

Public Health Engineering Department

Dholpur, Rajasthan

Closing Date28 Jul 2025

Tender Amount₹ 606.7 Cr

Kaliteer Water Supply Project Based On Hybird Annuity Model (ham) Ace (p) Bharatpur Nit No.03/2024-25

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.