Rural Drinking Water And Sanitation Department Tender

code04 - PUMPING MACHINARY : Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary ammendments and instructions of engineer incharge of work. 7.50 HP - 155 LPM @ 112 m = 10 STG Outlet Dia - 2.00" etc., complete as per specification, design and drawings including cost of all material, labor charges and hire charges of machineries with all lead and lift as directed by the Engineer-in-charge of work

code05 - Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1 x 3 x 10 Sq mm etc., complete as per specification, design and drawings including cost of all material, labor charges and hire charges of machineries with all lead and lift as directed by the Engineer-in-charge of work

code06 - Pressure Gauge: Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments. 100 mm dia etc., complete as per specification, design and drawings including cost of all material, labor charges and hire charges of machineries with all lead and lift as directed by the Engineer-in-charge of work

code07 - Gate Valve Providing Sluice valve/ scour valve confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. 100 MM DIA etc., complete as per specification, design and drawings including cost of all material, labor charges and hire charges of machineries with all lead and lift as directed by the Engineer-in-charge of work

code08 - Providing N.R. valve confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. 100 MM DIA etc., complete as per specification, design and drawings including cost of all material, labor charges and hire charges of machineries with all lead and lift as directed by the Engineer-in-charge of work

code09 - Supplying,laying,jointing ,testing and commissioning of G.I. Pipes conforming to IS 1239:1990 with latest amendments, including fixing Collars, Elbows, Tees, bends, Glad Cocks and other Fittings (Excluding Cost of Specials) with Cuts and Threads wherever necessary including conveying the materials to workspot, including testing for water tightness with all lead and lifts etc complete (Contractor shall make his own arrangements for procuring water for testing) :Class-C (HEAVY) 80 mm etc., complete as per specification, design and drawings including cost of all material, labor charges and hire charges of machineries with all lead and lift as directed by the Engineer-in-charge of work

code10 - Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no NOTE: 1) DOL- Direct Online Starter 2) S-D- Star Delta Starter etc., complete as per specification, design and drawings including cost of all material, labor charges and hire charges of machineries with all lead and lift as directed by the Engineer-in-charge of work

code11 - The supply & delivery of best indigenous brand new power capacitor as per IS 2834 / 96 with latest amendments with ISI mark of required capacity, tested & approved by KPTCL authorities, & erection, electrification & commissioning of the same at the location of respective pump sets. etc., complete as per specification, design and drawings including cost of all material, labor charges and hire charges of machineries with all lead and lift as directed by the Engineer-in-charge of work

code12 - Supply & delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 8828 / 78 & its latest amendments & with ISI mark of 6 / 10 / 16 / 20 / 25 / 40 Amps with sealable box. etc., complete as per specification, design and drawings including cost of all material, labor charges and hire charges of machineries with all lead and lift as directed by the Engineer-in-charge of work

code13 - Erection, electrification & commissioning works of pump sets including aligning & balancing with all necessary erection of materials & labor including supply & erection The Contractor has to arrange at his own cost all erection tools. etc., complete as per specification, design and drawings including cost of all material, labor charges and hire charges of machineries with all lead and lift as directed by the Engineer-in-charge of work

code14 - Erection of outdoor type panel board and meter board units with all necessary materials and labour including providing cement concrete foundation bed etc., complete. etc., complete as per specification, design and drawings including cost of all material, labor charges and hire charges of machineries with all lead and lift as directed by the Engineer-in-charge of work

code15 - Supplying & fixing LT Cabel suitable for 1.1 KV class UG cables filled with necessary bitumen / insulating, etc for the following cable sizes:4 x 25 Sq MM etc., complete as per specification, design and drawings including cost of all material, labor charges and hire charges of machineries with all lead and lift as directed by the Engineer-in-charge of work

code16 - Earthing:Supplying, fixing & wiring earth electrode for grounding circuits IC cutouts & other equipments on the Meter Board in the pit. The pit should be filled with equal proportion of salt & charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduits is to be established through GI wire of sizes as per Clause No 7.3.3 of IS 732 using 12 mm bolts, nuts, washers, check nuts, etc. The pipe shall have 16 through holes of 12 mm dia. complete as per specification, design and drawings including cost of all material, labor charges and hire charges of machineries with all lead and lift as directed by the Engineer-in-charge of work etc., complete as per specification, design and drawings including cost of all material, labor charges and hire charges of machineries with all lead and lift as directed by the Engineer-in-charge of work

code17 - PUMP HOUSE : Earth work excavation by manual means for In all kinds of soils Depth upto 1.5 m drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off theexcavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m etc., complete as per specification, design and drawings including cost of all material, labor charges and hire charges of machineries with all lead and lift as directed by the Engineer-in-charge of work

code18 - Providing and laying in position plain cement concrete Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarseaggregates for levelling course for all works in foundation. The granite/trap/basalt crushedgraded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates etc., complete as per specification, design and drawings including cost of all material, labor charges and hire charges of machineries with all lead and lift as directed by the Engineer-in-charge of work

code19 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. 2.1.4 Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates etc., complete as per specification, design and drawings including cost of all material, labor charges and hire charges of machineries with all lead and lift as directed by the Engineer-in-charge of work

code20 - 10.6 RCC hume pipe Circular pump house: Providing precast RCC Circular Hume pipe pump house with M.S door and RCC conical roof as per specification and drawings - Internal dia Mtr. 1200 mm & height of 2.5 Mtr. With Wall thickness 65mm etc. complete.Each 16401 etc., complete as per specification, design and drawings including cost of all material, labor charges and hire charges of machineries with all lead and lift as directed by the Engineer-in-charge of work

code21 - 10.7 Erection and positioning of RCC Hume pipe pump house/Cistern on size stone masory platform including transportation charges and handling,finishing with all necessary tools ,plants and materials etc.,complete as directed by the Engineer in charge of the work. etc., complete as per specification, design and drawings including cost of all material, labor charges and hire charges of machineries with all lead and lift as directed by the Engineer-in-charge of work

code22 - RISING MAIN : Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. HDPE Grade PE100-PN8.0,63mm dia etc., complete as per specification, design and drawings including cost of all material, labor charges and hire charges of machineries with all lead and lift as directed by the Engineer-in-charge of work

code23 - 11.1 Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For: 11.2.7 Medium Duty GI pipe of 65mm dia m 719 etc., complete as per specification, design and drawings including cost of all material, labor charges and hire charges of machineries with all lead and lift as directed by the Engineer-in-charge of work

code24 - Providing wrought mild steel (galvanized) GI collar confirming to IS 1239-II, 1991 with latest amendments if any. For 65 mm dia GI collar: Each 312 etc., complete as per specification, design and drawings including cost of all material, labor charges and hire charges of machineries with all lead and lift as directed by the Engineer-in-charge of work

code25 - Supply and delivery at site wrought middle steel (galvanized) GI bend confirming to IS 1239-II, 1991 with latest amendments if any.For 65 mm dia GI BEND Each 404 etc., complete as per specification, design and drawings including cost of all material, labor charges and hire charges of machineries with all lead and lift as directed by the Engineer-in-charge of work

code26 - Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata.All kinds of soils. Depth upto 1.50 etc., complete as per specification, design and drawings including cost of all material, labor charges and hire charges of machineries with all lead and lift as directed by the Engineer-in-charge of work

code27 - Depth exceeding 1.5 m, but not exceeding 3 m

code28 - Providing murrum or gravel bedding for the pipeline including watering and consolidation by punners etc. complete with all lead and lift. (in black cotton soil and rock reaches). etc., complete as per specification, design and drawings including cost of all material, labor charges and hire charges of machineries with all lead and lift as directed by the Engineer-in-charge of work

code29 - Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications etc., complete as per specification, design and drawings including cost of all material, labor charges and hire charges of machineries with all lead and lift as directed by the Engineer-in-charge of work

code30 - Providing 80 mm dia Air Valve Conforming to IS 1538 ( Part-I To XXII ) 1978 With Latest Amendments In any etc., complete as per specification, design and drawings including cost of all material, labor charges and hire charges of machineries with all lead and lift as directed by the Engineer-in-charge of work