Rural Development And Panchayat Raj Department Tender

code02 - Providing new embankment abutting to existing bund to strength the existing bund using soil from approved borrow area in layers of 200 to 250mm and compacting each layer to density control of not less than 95% by vibrating plate compactor or pneumatic tamper including cost of all material, mahinery, labour, picking previous layer, spreading soil in layer, breaking clods, watering etc., complete with initial lead upto 50m and all lifts.& with all lead and lift. and as per direction of the Engineer in charge of work.

code01 - Clearing thick jungle growth (less than 50% open space) including bushes upto 300mm/parthenium and other weeds including burning or disposing off the same as directed etc., complete & with all lead and lift. and as per direction of the Engineer in charge of work.

code06 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates & with all lead and lift. and as per direction of the Engineer in charge of work.

code11 - Providing and fixing chain link fencing consisting of 3 m long 65 x 65 x 6 mm M.S angles with top 50 cm bent at 30 degree to vertical fixed at 2.5 m intervals in C.C 1 : 3 : 6 proportion using 20 mm down graded coarse aggregate for 70 cm depth, fixing 50 x 50 mm opening 8 gauge G.I chain link mesh upto 1.8 m height of poles using 8 gauge stretcher wire at top and bottom and 30 x 30 x 5 mm M.S angles with bolts /nuts / washers ( 4 bolts for each pole ), fixing 3 rows of 12 gauge ( 4 barbs at 7.5 cm c/c ) G.I barbed wire for top bent portion of poles, including cost of all materials, machinery, labour, excavation of pit, mixing and laying concrete, curing, drilling holes in angles, cleaning angles, painting angles and Chain links with 2 coats of synthetic enamel paint over a coat of primer etc., complete with all lead and lifts. & with all lead and lift. and as per direction of the Engineer in charge of work.

code12 - Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Charge.

code14 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification All other type of structures & with all lead and lift. and as per direction of the Engineer in charge of work.

code04 - Providing and constructing 550 mm thick hand packed rough stone revetment consisting of 300 mm thick rough stones with 400 to 450 mm long through stones at 1.5 m c / c over filter backing of 100 mm thick sand and 150 mm thick 40 mm down graded coarse aggregate layers including cost of all materials, machinery, labour, laying to specified slope, wedging with chips, finishing etc., complete with all lead and lifts. & with all lead and lift. and as per direction of the Engineer in charge of work.

code05 - Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.& with all lead and lift. and as per direction of the Engineer in charge of work.

code07 - Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) & with all lead and lift. and as per direction of the Engineer in charge of work.

code10 - Providing and laying flooring with burnt stone slabs 10 cms thick rough chistle dressed on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3, , including cost of materials, mortar, labour, curing complete as per specifications& with all lead and lift. and as per direction of the Engineer in charge of work.

code03 - Removing distrubed rough / size stone revetment 300 mm thick with 150mm thick 40mm down aggregate backing and resetting the same using the available stones and aggregates including packing wedging finishing etc., complete with all lead lifts& with all lead and lift. and as per direction of the Engineer in charge of work.