Rural Development And Panchayat Raj Department Tender

MAH17 - Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for:PVC pipes 75mm dia., 6 kg/sqcm & class 3 with all lead and lift complete. as per the directions of the Engineer-in-charge of the work.(PWD Common Schedule of Rate 2023-24 Page No. 134 Item No 1.5( M010E) Vol -5)

MAH21 - Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern with all lead and lift complete. as per the directions of the Engineer-in-charge of the work.(PWD Common Schedule of Rate 2023-24 Page No. 132 Item No14.5.4 Vol -2)

MAH09 - Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification with all lead and lift complete. as per the directions of the Engineer-in-charge of the work.(PWD Common Schedule of Rate 2023-24 Page No-104 Item No-12.54 Vol -2)

MAH04 - Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates with all lead and lift complete. as per the directions of the Engineer-in-charge of the work.(PWD Common Schedule of Rate 2023-24 Page No-15 Item No-2.2.1.1 Vol -1)

MAH19 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall25 mm nominal dia Pipes with all lead and lift complete. as per the directions of the Engineer-in-charge of the work.(PWD Common Schedule of Rate 2023-24 Page No. 122 Item No 13.31.3 Vol -2)

MAH10 - Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.-do- with one side prelam(PWD Common Schedule of Rate 2023-24 Page No. 104 Item No 12.55.2 Vol -2)

MAH15 - Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 g/l, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Twocoats on new work to give an even shade after thoroughly brooming thesurface to remove all dirt, dust, mortar drops and foreign matter including preparing thsurface even and sand paper smooth, cost of materials, labour complete as perspecifications and as per directions of Engineer-in-charge.(PWD Common Schedule of Rate 2023-24 Page No. 45 Item No 8.26 Vol -2)

MAH20 - Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps with all lead and lift complete. as per the directions of the Engineer-in-charge of the work.(PWD Common Schedule of Rate 2023-24 Page No. 132 Item No14.7.1 Vol -2)

MAH03 - Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) with all lead and lift complete. as per the directions of the Engineer-in-charge of the work.(PWD Common Schedule of Rate 2023-24 Page No-9 Item No-5.1.1 Vol -2)

MAH13 - Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg/m2, including pointing in white cement mixed with pigment of matching shade complete. with all lead and lift complete. as per the directions of the Engineer-in-charge of the work.(PWD SR 2023-24 / VOLUME 2/ I NO 10.14/ P. NO 71)

MAH18 - Providing and fixing CI Nahani trap of approved make conforming to ISI specifications and construction of Cistern in M-15 as per directions (Rate is inclusive of cost of materials and fixtures and conveyance of materials to work spot). - 10cms x 7.5cms with all lead and lift complete. as per the directions of the Engineer-in-charge of the work.(PWP&IWTD CIRCLE BGM SR 2018-19 Pg.No.90 It.No.12.113.1 )

MAH05 - Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates with all lead and lift complete. as per the directions of the Engineer-in-charge of the work.(PWD Common Schedule of Rate 2023-24 Page No-16 Item No-2.3.1 Vol -1)

MAH06 - Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. with all lead and lift complete. as per the directions of the Engineer-in-charge of the work. (PWD CSR 2023-24 Vol -2 P.No 84 / I.No-11.32 )

MAH08 - Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete with all lead and lift complete. as per the directions of the Engineer-in-charge of the work. (PWD SR 2023-24 / VOLUME 2 / I NO 8.1.1 / P. NO 41 )

MAH16 - Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of the slab = 0.50 m2.with all lead and lift complete. as per the directions of the Engineer-in-charge of the work. (PWD Common Schedule of Rate 2023-24 Page No.69 Item No 10.1.1 Vol -2)

MAH02 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates with all lead and lift complete. as per the directions of the Engineer-in-charge of the work. (PWD Common Schedule of Rate 2023-24 Page No. 15 Item No 2.1.6 Vol -1)

MAH22 - 15 mm C.P.brass tap with all lead and lift complete. as per the directions of the Engineer-in-charge of the work.(PWD Common Schedule of Rate 2021-22 Page No-A-33 Item No-694 Material Component Vol -2)

MAH01 - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the workIn all kinds of soils Depth upto 3 m.with all lead and lift complete. as per the directions of the Engineer-in-charge of the work.(PWD Common Schedule of Rate 2023-24 Page No-8 Item No-1.14.1 Vol -1)

MAH11 - Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests with all lead and lift complete. as per the directions of the Engineer-in-charge of the work.(PWD Common Schedule of Rate 2023-24 Page No-131 Item No-14.1.1 Vol -2)

MAH12 - Crazy ceramic tile flooring, with under layer 12 mm thick cement mortar 1:4 (1cement: 4 coarse sand), with joints not exceeding 5 mm, including filling the gaps with ordinary cement mixture & mixing with synthetic polyester fibre, triangular in shape having specific gravity of 1.34 to 1.40, cross section size ranging from 10 to 40 micron & length upto 6 mm , mixing fibre @ 125 g per 50 kg of cement in cement mortar, including providing and mixing water proofing material in mortar @ 1 kg per 50 kg of cement, all complete with all lead and lift complete. as per the directions of the Engineer-in-charge of the work.(PWD SR 2023-24 / VOLUME 2 / I NO 9.15/ P. NO 61)