Rural Development And Panchayat Raj Department Tender

code24 - Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. With all lead and lift complete as per the directions of engineer incharge of the work

code16 - Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates With all lead and lift complete as per the directions of engineer incharge of the work

code20 - Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/ stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. With all lead and lift complete as per the directions of engineer incharge of the work

code23 - Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work With all lead and lift complete as per the directions of engineer incharge of the work

code18 - Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement complete as per drawing and technical specification. Building works Details of cost for 1t MATERIAL (TMT bars including 5 per cent overlaps and wastage) Binding wire With all lead and lift complete as per the directions of engineer incharge of the work

code03 - Providingandfixing12mmthickprelaminatedparticleboardflatpressedthreelayerorgradedwoodparticleboardconformingtoIS:12823GradelTypell,inpanellingfixedinaluminumdoors,windowsshuttersandpartitionframeswithC.P.brass/stainlesssteelscrewsetc.completeasperarchitecturaldrawings and directions of engineer-in-charge: Pre laminated particle board with decorative lamination on oneside and balancing laminationonothersideincludingcostofmaterials,labour,usagechargesofmachinery With all lead and lift complete as per the directions of engineer incharge of the work

code13 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:5:10 Using 40 mm and down size graded crushed coarse aggregates With all lead and lift complete as per the directions of engineer incharge of the work

code15 - Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) With all lead and lift complete as per the directions of engineer incharge of the work

code04 - Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cat Eye, River Pink or equivalent. With all lead and lift complete as per the directions of engineer incharge of the work

code02 - ProvidingandfixingHighPressureLaminateWoodentexturedColoredsheets-Doublesided With all lead and lift complete as per the directions of engineer incharge of the work

code08 - Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. With all lead and lift complete as per the directions of engineer incharge of the work

code22 - Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. With all lead and lift complete as per the directions of engineer incharge of the work

code01 - Providingandsupplying19mmthickbothsidebalancinglaminationfactorypressedBWPgrademarineplyasperIS710ofapprovedbrandboxes,shelves,racks,almirah,cupboardanddraweretc.includingnecessary nails,screws etc. With all lead and lift complete as per the directions of engineer incharge of the work

code10 - Providing and lying Polished glazed Vitrifide tiles in floor with difrent sizes (thickness to be Specified by the manufuctre) with water absorppion lessthen 0.08 % and confroming to IS:1562, of approved brand and manufacturer, in all colours shade, laid with cement besed Hagh polemor modifid quite set tile adhesive (Water based) Conforming to IS: 15477, in avreage 6mm thickness including Grouthing of joints 600X600mm With all lead and lift complete as per the directions of engineer incharge of the work

code19 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications With all lead and lift complete as per the directions of engineer incharge of the work

code21 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. With all lead and lift complete as per the directions of engineer incharge of the work

code14 - Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) With all lead and lift complete as per the directions of engineer incharge of the work

code25 - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. With all lead and lift complete as per the directions of engineer incharge of the work

code11 - Providingandfixingsumpopeningchamberusingsteelplateincludingcostoffabrication,fixing,painting,labour etc., as per specification With all lead and lift complete as per the directions of engineer incharge of the work

code06 - Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured. With all lead and lift complete as per the directions of engineer incharge of the work

code17 - Provide 50% form work for plinth beam With all lead and lift complete as per the directions of engineer incharge of the work

code07 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc.With all lead and lift complete as per the directions of engineer incharge of the work

code26 - Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 m3 capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joints, primer, sealant , curing of concrete slabs for 14-days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., With all lead and lift complete as per the directions of engineer incharge of the work