Rural Development And Panchayat Raj Department Tender

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1, with all lead, lifts, loading and unloading charges cost and conveyance of all materials, labour equipnments etc complete as per the directions of Engineer in charge of the work.

Direction and Place Identification Signs upto 0.9 sqm Size Board: Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 x 45 x 60 em, 60 em below ground level as per approved drawing, with all lead, lifts, loading and unloading charges cost and conveyance of all materials, labour equipnments etc complete as per the directions of Engineer in charge of the work.

Retro-reflectorised Traffic Sign : Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5mm thick supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved Drawing. 600mm Equilateral triange - TYPE XI, with all lead, lifts, loading and unloading charges cost and conveyance of all materials, labour equipnments etc complete as per the directions of Engineer in charge of the work.

Removing all types of Hume pipes and stacking within a lead of 1000 m including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202. - Above 600 mm to 900 mm dia Hume pipe, with all lead, lifts, loading and unloading charges cost and conveyance of all materials, labour equipnments etc complete as per the directions of Engineer in charge of the work.

Providing and laying reinforced cement concrete in superstructure as per drawing and teclmical specifications Clauses 800, 1205.4 and 1205.5, with all lead, lifts, loading and unloading charges cost and conveyance of all materials, labour equipnments etc complete as per the directions of Engineer in charge of the work.

Preparation of Foundation for Embankment, Scarifying Existing Granular Surface to a Depth of 50 mm by Manual Means Scarifying existing granular surface to a depth of 50 mm and disposal of scarified material with a lift upto 3 m and leads upto 1000 m as per Technical Specification Clause 301.5, with all lead, lifts, loading and unloading charges cost and conveyance of all materials, labour equipnments etc complete as per the directions of Engineer in charge of the work.

Prime Coat - Low porosity Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502, with all lead, lifts, loading and unloading charges cost and conveyance of all materials, labour equipnments etc complete as per the directions of Engineer in charge of the work.

Construction of Embankment with Material Obtained from Borrow Pits Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5, with all lead, lifts, loading and unloading charges cost and conveyance of all materials, labour equipnments etc complete as per the directions of Engineer in charge of the work.

Providing and fixing RCC name board of size 1.35xk0.60x0.04 mtrs fixed in reinforced cement concrete poles of size 0.1OxO.1Ox2.60mtrs in cement concrete M 20 proportion using 20mm and down size graded metal machine mixed with 1Omm dia main steel bars and 8mm dia stirups. The board shall be provided with 12mm thick cement plaster in cement mortar 1 :3 on both the sides. The poles shall be embedded in the ground for a depth of0.5 mtrs with cement concrete M 10 proportion. The board shall be fixed as per the drawing and atthe place indicated by the Engineer incharge of the work. The cost includes excavation, bare cost of all materials, cost of steel, centering, transportation charges, fixing charges, labour, HOM etc., The work shall be carried out as per the detailed specifications, drawings and directions of the Engineer in charge of the work, with all lead, lifts, loading and unloading charges cost and conveyance of all materials, labour equipnments etc complete as per the directions of Engineer in charge of the work.

Kilometre Stone--Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703--Ordinary Kilometer Stone (Precast), with all lead, lifts, loading and unloading charges cost and conveyance of all materials, labour equipnments etc complete as per the directions of Engineer in charge of the work.

Water Bound Macadam with Crushable Screenings WBM Grading 2 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405. - By Mechanical Means, with all lead, lifts, loading and unloading charges cost and conveyance of all materials, labour equipnments etc complete as per the directions of Engineer in charge of the work.

Kilometre Stone--Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703--200 m stone (precast), with all lead, lifts, loading and unloading charges cost and conveyance of all materials, labour equipnments etc complete as per the directions of Engineer in charge of the work.

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 - P.C.C grade M 10--Nominal mix 1:3:6, with all lead, lifts, loading and unloading charges cost and conveyance of all materials, labour equipnments etc complete as per the directions of Engineer in charge of the work.

Excavation for Structures--Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. - Ordinary soil--Upto 3 m depth, with all lead, lifts, loading and unloading charges cost and conveyance of all materials, labour equipnments etc complete as per the directions of Engineer in charge of the work.

Providing and laying pitching on slopes laid over prepared filter media as per drawing and technical specifications Clause 1302 - Stone/Boulder, with all lead, lifts, loading and unloading charges cost and conveyance of all materials, labour equipnments etc complete as per the directions of Engineer in charge of the work.

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5, with all lead, lifts, loading and unloading charges cost and conveyance of all materials, labour equipnments etc complete as per the directions of Engineer in charge of the work.

Water Bound Macadam Sub-base/base WBM Grading 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. - By Mechanical Means, with all lead, lifts, loading and unloading charges cost and conveyance of all materials, labour equipnments etc complete as per the directions of Engineer in charge of the work.

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 - R.C.C grade M 20, with all lead, lifts, loading and unloading charges cost and conveyance of all materials, labour equipnments etc complete as per the directions of Engineer in charge of the work.

Surface Drains in Soil Construction of unlined surface drains of average cross-sectional area 0.40 sqm in soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3m and lead of 50 m (average lead 25 m) as per Technical Specification Clause 307. - Mechanical Means, with all lead, lifts, loading and unloading charges cost and conveyance of all materials, labour equipnments etc complete as per the directions of Engineer in charge of the work.

Cement Concrete Pavement (without dowel bars) - Construction of un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of construction joints,primer, sealant, curing of concrete slabs for 14-days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per the directions of the Engineer-in-charge of the work.

Supplying, fitting and placing TMT bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202, with all lead, lifts, loading and unloading charges cost and conveyance of all materials, labour equipnments etc complete as per the directions of Engineer in charge of the work.

Clearing and Grubbing Road Land Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 By Mechanical Means - In area of thorny jungle, with all lead, lifts, loading and unloading charges cost and conveyance of all materials, labour equipnments etc complete as per the directions of Engineer in charge of the work.

Boundary Pillar--Reinforced cement concrete M15 grade boundary pillars/local stone of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting as per drawing and Technical Specification Clause 1704, with all lead, lifts, loading and unloading charges cost and conveyance of all materials, labour equipnments etc complete as per the directions of Engineer in charge of the work.

Supplying, fitting and placing TMT bar reinforcement in superstructrue complete as per drawings and technical specification Clauses 1002, 1010 & 1202, with all lead, lifts, loading and unloading charges cost and conveyance of all materials, labour equipnments etc complete as per the directions of Engineer in charge of the work.

Tack Coat - Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503, with all lead, lifts, loading and unloading charges cost and conveyance of all materials, labour equipnments etc complete as per the directions of Engineer in charge of the work.

Granular Sub-base with Well Graded Material (Table 400.1) By Mix in Place Method Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired, complete as per Technical Specification Clause 401 - For Grading III Material, with all lead, lifts, loading and unloading charges cost and conveyance of all materials, labour equipnments etc complete as per the directions of Engineer in charge of the work.

Providing and laying boulder apron for bed protection with stone boulders of minimum size and weight as per Table 1300.1, no fragment weighing less than 25 kg laid dry complete as per drawing and technical specifications Clause 1301, with all lead, lifts, loading and unloading charges cost and conveyance of all materials, labour equipnments etc complete as per the directions of Engineer in charge of the work.

Compacting original ground supporting embankment, Loosening, Levelling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Tables 300.1 and 300.2 for embankment construction as per Technical Specification Clause 301.4.1, with all lead, lifts, loading and unloading charges cost and conveyance of all materials, labour equipnments etc complete as per the directions of Engineer in charge of the work.

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204--For height upto 5 m - R.C.C grade M 20, with all lead, lifts, loading and unloading charges cost and conveyance of all materials, labour equipnments etc complete as per the directions of Engineer in charge of the work.