Rural Development And Panchayat Raj Department Tender
... More
The RDPR has issued a formal invitation for competitive bids for the Rural Development And Panchayat Raj Department project, for Construction Of Asphalt Road From Bhattarhanchinal To Bapireddy Camp In Gangavathi Taluka Of Koppal District in Koppal, Karnataka, with an estimated contract value of Rs. 49,72,452. The bid opening date for this tender is 12-02-2025 and the last date for bid submission is 19-02-2025. Interested bidders for Rural Development And Panchayat Raj Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Costs
EMD
₹ 99,500Document Cost
Refer DocumentsTender Fee
₹ 1,250
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
RDPR/2024-25/RD/WORK_INDENT8830/CALL-2Bid Award Id
ViewTender No
RDPR/2024-25/RD/WORK_INDENT8830/CALL-2Tender Authority
Rural Development And Panchayat Raj Department ViewPurchaser Address
-Website
http://https://www.tnrd.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
8.16 - Reinforced cement concrete M15grade kilometre stone of
standard design as per IRC:8-1980, fixing in position including
painting and printing etc Ordinary kilometer Stone Precast
1
3073
3073.35
... More
3.6 - Construction of sub-grade and earthen shoulders with approved
material obtained from borrow pits with all lifts & leads,
transporting to site, spreading, grading to required slope and
compacted to meet requirement of table No. 300-2
970.55
517
502405.2075
... More
8.16 - Reinforced cement concrete M15grade kilometre stone of
standard design as per IRC:8-1980, fixing in position including
painting and printing etc 200 mm Precast
3
884
2652.3
... More
P No 9 I No 2.5 - Clearing and grubbing road land including uprooting rank
vegetation, grass, bushes, shrubs, saplings and trees girth up to
300 mm, removal of stumps of trees cut earlier and disposal of
unserviceable materials and stacking of serviceable material to
be used or auctioned, including removal and disposal of top organic
soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer
In area of light jungle
16.8
412
6932.52
... More
8.6.A - Retro-Reflectorised Traffic Signs Providing and fixing of retro- reflectorised cautionary,
mandatory and informatory sign as per IRC:67:2022 made
of Class C Type XI retro reflective sheeting fixed over 2 mm
thick aluminium sheeting vide clause 801.3, 3mm/4mm thick
Aluminium composite material sheet depending on the size of
the sign fixed over the back support frame of min 25 x 25 x
3mm angle mounted on a mild steel circular pipe 65 NB, 3.2
mm thickness firmly fixed to the ground by means of properly
designed foundation with M25 grade cement concrete 45 cm
x 45 cm x 60 cm, 60 cm below ground level as per approved
drawing.The sign shall be maintained as per section 12 of
IRC:67:2022 60 cm equilateral triangle
8
3784
30273.6
... More
5.1 - Providing and applying primer coat with SS1 grade Bitumen
Emulsion on prepared surface of granular base including
cleaning of road surface and spraying primer at the rate of 0.70
kg/m2 using mechanical means.Prime Coat over Stabilised Soil base / Crusher Run Macadam
2711.8
43
116742.99
... More
5.19 - Open - Graded Premix Surfacing Providing, laying and rolling of open - graded premix surfacing
of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates
either using viscosity grade bitumen VG-30 to required line, grade
and level to serve as wearing course on a previously prepared
base, including mixing in a suitable Hot mix plant of capacity not
less than 40/60 TPH laying and rolling with a smooth wheeled
roller, finished to required level and grades.
2711.8
156
424261.11
... More
5.3 - Providing and applying tack coat with RS1 Bituminous Emulsion
using emulsion pressure distributor at the rate of 0.20 kg/m2 on
the prepared bituminous surface cleaned with mechanical broom Tack coat on Bituminous surface
2711.8
12
34168.68
... More
1.7 - Construction of Embankment with approved materials deposited at site from
roadway cutting and excavation from drain and foundation of other structures
graded with desired compaction. (Royalty shall be recovered @ Rs. 60.00/m3
)
897.17
124
112101.3915
... More
I No 16.10 - Construction of Granular Sub-Base by Mix in Place Method
by providing well graded Gravel, spreading in uniform
layers with motor grader on prepared surface, mixing by
mix in place method with rotavator at OMC, and compacting
with smooth wheel roller to achieve the desired density,
complete as per Technical Specification
705.6
1498
1057235.76
... More
4.14 - Providing, laying, spreading and compacting stone aggregates of
specific sizes to water bound macadam specification including
spreading in uniform thickness, hand packing, rolling with
vibratory roller in stages to proper grade and camber, applying
and brooming requisite type of screening/ binding Materials to fill
up the interstices of coarse aggregate, watering and compacting
to the required density.Using Screening Crushable type such as Moorum or Gravel
211.26
2272
480024.972
... More
5.21 - Providing and laying seal coat sealing the voids in a bituminous
surface laid to the specified levels, grade and cross fall using Type
A and B seal coats with bituminous binder VG-30 Case - II : Type B Premix Seal coat
2711.8
54
148064.28
... More
8.7 - Direction and Place Identification Signs upto 0.9 m2 Size
Board.Providing and erecting direction and place identification retroreflectorised sign as per IRC:67:2022 made of high intensity
grade sheeting vide clause 801.3, fixed over aluminium
sheeting, 2 mm thick or Aluminium composite material sheet
with overall thickness of 4mm with area not exceeding 0.9
m2 fixed over back support frame of min 35 x 35 x 3mm angle
mounted on a mild steel circular pipe 65 NB, firmly fixed to the
ground by means of properly designed foundation with M25
grade cement concrete 45 x 45 x 60 cm, 60 cm below ground
level as per approved drawing
5.4
9460
51086.7
... More
1.8 - Construction of Embankment by excavating the available approved Gravel/
Murrum deposited at a place or borrow pits during or prior excavation with all
lifts and lead, transportation to site, spreading, grading to required slope and
compacting to meet the requirement complete as per specifications, including
cost of labour,rolling,water,all materials,usage& all other appurtenaces required
to complete the work.
2227.07
497
1108412.739
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements