Rural Development And Panchayat Raj Department Tender

Code 4 - Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- Complete as per technical specification with all lead and lifts loading, unloading charges cost of conveyance of all materials, labour charges and all other incidental charges etc. Completed as per specification and directions of the Engineer and charge of the work.

Code 6 - Nandi Wood Reepers 50x25mm ---- Complete as per technical specification with all lead and lifts loading, unloading charges cost of conveyance of all materials, labour charges and all other incidental charges etc. Completed as per specification and directions of the Engineer and charge of the work.

Code 6 - Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineerin-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required ---- Complete as per technical specification with all lead and lifts loading, unloading charges cost of conveyance of all materials, labour charges and all other incidental charges etc. Completed as per specification and directions of the Engineer and charge of the work.

Code 7 - Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. ---- Complete as per technical specification with all lead and lifts loading, unloading charges cost of conveyance of all materials, labour charges and all other incidental charges etc. Completed as per specification and directions of the Engineer and charge of the work.

Code 8 - Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Complete as per technical specification with all lead and lifts loading, unloading charges cost of conveyance of all materials, labour charges and all other incidental charges etc. Completed as per specification and directions of the Engineer and charge of the work.

Code 9 - Repairing door and window frames with available wood to the required size. ---- Complete as per technical specification with all lead and lifts loading, unloading charges cost of conveyance of all materials, labour charges and all other incidental charges etc. Completed as per specification and directions of the Engineer and charge of the work.

Code 10 - Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 137.00 8.26 Distempering with 1st ---- Complete as per technical specification with all lead and lifts loading, unloading charges cost of conveyance of all materials, labour charges and all other incidental charges etc. Completed as per specification and directions of the Engineer and charge of the work.

Code 11 - Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Complete as per technical specification with all lead and lifts loading, unloading charges cost of conveyance of all materials, labour charges and all other incidental charges etc. Completed as per specification and directions of the Engineer and charge of the work.

Code 12 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One coats on old work as per specifications and as per directions of Engineer in charge. ---- Complete as per technical specification with all lead and lifts loading, unloading charges cost of conveyance of all materials, labour charges and all other incidental charges etc. Completed as per specification and directions of the Engineer and charge of the work.

Code 13 - Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. ---- Complete as per technical specification with all lead and lifts loading, unloading charges cost of conveyance of all materials, labour charges and all other incidental charges etc. Completed as per specification and directions of the Engineer and charge of the work.

Code 14 - Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. ---- Complete as per technical specification with all lead and lifts loading, unloading charges cost of conveyance of all materials, labour charges and all other incidental charges etc. Completed as per specification and directions of the Engineer and charge of the work.

Code 15 - Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Engineer-in-charge. ---- Complete as per technical specification with all lead and lifts loading, unloading charges cost of conveyance of all materials, labour charges and all other incidental charges etc. Completed as per specification and directions of the Engineer and charge of the work.

Code 16 - Dismantling wood work in frames, trusses, purlins and rafters upto 10 metres span and 5 metres height including stacking to the appropriate disposal area as per direction of Engineer-in-charge. ---- Complete as per technical specification with all lead and lifts loading, unloading charges cost of conveyance of all materials, labour charges and all other incidental charges etc. Completed as per specification and directions of the Engineer and charge of the work.

Code 17 - Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge ---- Complete as per technical specification with all lead and lifts loading, unloading charges cost of conveyance of all materials, labour charges and all other incidental charges etc. Completed as per specification and directions of the Engineer and charge of the work.