Public Works Department Tender

P.31 : I.N 5.1 SR: 2023-24 - Prime Coat over WMM/WBM Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanical means. ---- WITH LEAD

P 93. : I.N. 10.15.ii SR 2023-24 - Patching of Deep Potholes 75mm thick by restoring the Granular Base course using material confirming to WBM Grade -I with B type Screenings standards wherever necessary by manual means including trimming the pothole to the required shape and size, cleaning the pothole, applying Prime Coat (SS1) at 0.70 kg per m2 over the WBM surface and covering the surface with SDBC 25mm thick including lead, loading unloading, rolling and finishing etc., complete as per specification. ---- WITH LEAD

vol-3 5.3 SR 2023 -24 - Tack coat on Bituminous surface Providing and applying tack coat with VG-10 Bitumen usingpressure distributor at the rate of 0.20 kg/m2 on the preparedbituminous surface cleaned with mechanical broom ---- WITH LEAD

P.17 I.N. 3.6 SR 2023-24 - KSRRB M300-Construction of Subgrade and Earthen Shoulders. KSRRB M300-55. Construction of sub-grade and earthen shoulders with approved material Gravel/Murrum with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table No. 300-2 complete as per specifications (including cost of earth, watering charges & compaction by vibratory rollercompaction by vibratory roller to 97% of proctors density) MORTH Specification No. 305 ---- WITH LEAD

P 93. : I.N. 10.15.i SR 2023-24 - Patching of Shallow Potholes using SDBC Gr II 25 mm thick Patching of shallow potholes on asphalt surfaces by using Semi Dense Bituminous Concrete 25mm thickness. The Cost is inclusive of removing the failed materials & cleaning on the road surface, preparation of potholes to the required standards sizes before patching them and application of tack coat at 0.20 kg/m2 over the asphalt surface including lead, loading unloading, rolling and finishing etc., complete as per specification. ---- WITH LEAD

vol-3 IN-3.4 ii 2023-24 SR - Scarifying Existing Granular Surface to a Depth of 50 mm by Mechanical Means using Hydraulic excavator ---- WITH LEAD

P.78 : I.N. 8.54 SR: 2023-24 - Providing and fixing board displaying information, suchas 'Name of work, Tender cost, Name of Contractor, Workcompletion and liability period etc', having rectangular shapeof 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mildsteel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and greystove enamel on back side and border / messages / symbolsetc. with approved colour shade paint complete, on M.S.angleof size 35 x 35 x 3 mm frame with properly cross braced M.S.angles of size 35mmx35mmx3mm duly painted including TwoM.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 mlong painted with alternate black and white bands of 25 cm widthincluding all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation,refilling, transportation, and labour etc complete. Spec. No. As ---- WITH LEAD