Public Works Department Tender

KSRRB M500-17. Providing and laying dense graded bituminous macadam using crushed aggregates of specified grading, premixed with VG30 grade bituminous binder and, transporting the hot mix to work site, laying to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction in all respects, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges,and all other incidental charges etc., complete as per standard technical specification, and directions of the Engineer incharge of work..Clause 505 of MORTH V revision - -do- using 40/60 TPH capacity H.M.P. with Mechanical paver Gr-II (50 mm to 75 mm) with 4.5 % VG-30 Bitumen

KSRRB M500-19. Providing and laying bituminous concrete using crushed aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site, laying w ith a paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction in all respects complete as per specifications. Clause 507 of MORTH V revision - -do- using 40/60 TPH capacity H.M.P. with Mechanical Paver Gr-11 (30 mm to 40 mm) with 5.4% VG-30 Bitumen,including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges,and all other incidental charges etc., complete as per standard technical specification, and directions of the Engineer incharge of work.

Earth work in excavation for foundation of structures of 6 Kg/cm2 like culverts, retaining walls etc., as per drawing and technical specification, including setting out, construction of shoring and bracing, dressing of sides and bottom, backfilling with approved material, disposal of balance earth as per specifications, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges,and all other incidental charges etc., complete as per standard technical specification, and directions of the Engineer incharge of work, HOM etc. , complete. - -do- in all kinds of soil by mechanical means.

KSRRB M2900-1. Providing and laying Plain cement concrete M10 mix with crushed stone aggregate 40mm nominal size mechanically mixed, placed in foundation and compacted by vibration , including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges,curing and all other incidental charges etc., complete as per standard technical specification, and directions of the Engineer incharge of work.

Providing and laying reinforced cement concrete pipe NP3 for culverts including pointing ends, and fixing collars with cement mortar 1:2, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges,curing and all other incidental charges etc., complete as per standard technical specification, and directions of the Engineer incharge of work.Specifications. No. KSRB 1000, 2300. MOST Specification No.1000 /2300 - 900mm. dia

Providing and laying reinforced cement concrete pipe NP3 for culverts including pointing ends, and fixing collars with cement mortar 1:2 , including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges, curing and all other incidental charges etc., complete as per standard technical specification, and directions of the Engineer incharge of work. No. KSRB 1000, 2300. MOST Specification No.1000 / 2300 - 600mm. dia

Direction and Place Identification Signs with size more than 0.9 sqm Size Board: Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level ,including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges, labour charges,and all other incidental charges etc., complete as per standard technical specification, and directions of the Engineer incharge of work.

Retro-Reflectorised Traffic Signs Providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges,and all other incidental charges etc., complete as per standard technical specification, and directions of the Engineer incharge of work. 900 M M Equilateral triangle TYPE XI

Retro-Reflectorised Traffic SignsProviding and fixing of retro - reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 em x 45 em x 60 em, 60 em below ground level ,including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges,and all other incidental charges etc., complete as per standard technical specification, and directions of the Engineer incharge of work.- 600 X 800 mm - TYPE XI

KSRRB MS00-23.1. Metal Beam Crash Barrier:-Providing and erecting a W metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 em above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be ggregates by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges,and all other incidental charges etc., complete as per standard technical specification, and directions of the Engineer incharge of work. Excluding cost of earth work excavation and PCC for fixing. A Type - A, W MORTH Specification No. 810 (Item Code may be read as 24.27)

KSRRB M800 Road markers / Road studKSRRB MS00-35. Supply and lnstalltion of Moulded Shank Raised Pavement Markers made of polycarbonate and ABS(Acrylonitrile Butadiene Styrene) moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to Specifications of Category A of MORTH Circular No RW/ NH/33023/10-97- DO Ill Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 1DO mm and 102 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 mm and height not less than 30 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer’s recommendation ,including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges,and all other incidental charges etc., complete as per standard technical specification, and directions of the Engineer incharge of work.

KSRRB M800-13.Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass Beads on Bituminous Surface/ Concrete Surface: Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 standards specified. The finished surface to be leveled, uniform and free from streaks and holes, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges,and all other incidental charges etc., complete as per standard technical specification, and directions of the Engineer incharge of work.. MORTH Specification No. 803

Construction of earthen shoulders using good quality of hard soil deposited at site obtained from roadway cutting and excavation from drain and foundation of other structures , transporting to site, spreading, grading to required slope and compacted to meet the requirement as per table No. 300-2 , inclusive of watering charges and compaction by vibratory roller,including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments, transportation charges,labour charges,and all other incidental charges etc., complete as per standard technical specification, and directions of the Engineer incharge of work.

KSRRB M2300 - TMT Bar Reinforcement KSR R M2300 -14 Supplying, fitting and placing TMT Bar reinforcement in Super-Structure, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges, and all other incidental charges etc., complete as per standard technical specification, and directions of the Engineer incharge of work. MORTH Specification No.1600

Providing and laying in position plain/Reinforced cement cement concrete M20 for sub-structure/Superstructure works, with cement @ 320 kgs, 20 mm & down size graded granite metal coarse aggregate @ 0.69 cum and fine aggregates @ 0.46 cum machine mixed with super plasticisers @ 3 lts conforming to IS 9103-2008,concrete laid in layers, well compacted and providing weep holes wherever necessary with necessary scaffolding, form work etc.,including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges, curing and all other incidental charges etc., complete as per standard technical specification, and directions of the Engineer incharge of work.

Earth work excavation for foundation of structures upto 3 mtrs. By mechanical means, including setting out, providing shoring, strutting and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, filling back the excavated earth to the extent required and ggregate /transporting the remaining earth upto 1.00km lead. Including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges,and all other incidental charges etc., complete as per standard technical specification, and directions of the Engineer incharge of work.. do-In all types of soils

Providing and Installing at site of work P V C pipes including cost of pipes and specials and labour, including lowering into treaches , laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour and lift charges , handling charges with an intial lead of 5.0km including incasing the pipe all round to a depth not less than 15 cm with gravel or selected earth available from excavation etc., including cost and conveyance of all materials, labour, hire charges of machineries and equipment, lead and lift, loading and unloading charges, transporation and all other incidental charges etc., complete the work shall be carried out as per standard technical detailed specifications and as per the directions of the Engineer in charge of the work (RWS SR 2019-20 Page no. 76, I no. 10.01.2-90 mm dia pipe

Providing and Installing at site of work P V C pipes including cost of pipes and specials and labour, including lowering into treaches , laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour and lift charges , handling charges with an intial lead of 5.0km including incasing the pipe all round to a depth not less than 15 cm with gravel or selected earth available from excavation etc., including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges,and all other incidental charges etc., complete as per standard technical specification, and directions of the Engineer incharge of work (RWS SR 2019-20 Page no. 76, I no. 10.01.2.b)PVC pipe of 6 KG/cm2-75 mm dia pipe