Public Works Department Tender

Vol 3 Page No.43 SI No.5.32 - Tack coat on Bituminous surface Providing and applying tack coat with VG-10 Bitumen using pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom ---- including cost of all materials, with all lead lift, transporting to site, loading unloading, labour charges, HOM, etc complete as per specifications as per directions of Engineer-in-charge of Work.

Vol 3 Page No.33 SI No.5.8(c) - Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using rushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.4% by weight of mix, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction ---- including cost of all materials, with all lead lift, transporting to site, loading unloading, labour charges, HOM, etc complete as per specifications as per directions of Engineer-in-charge of Work.

Vol 3 Page No.43 SI No.5.31 - Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight of mix and filler, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per MoRTH V revision. ---- including cost of all materials, with all lead lift, transporting to site, loading unloading, labour charges, HOM, etc complete as per specifications as per directions of Engineer-in-charge of Work.

Vol 3 Page No.17 SI No.3.6 - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 ---- including cost of all materials, with all lead lift, transporting to site, loading unloading, labour charges, HOM, etc complete as per specifications as per directions of Engineer-in-charge of Work.

Vol-3 P.No. 64 Sl NO 8.5A(ii)) - Retro-Reflectorised Traffic Signs Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2012 made of Class B Type IV retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 803.1, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over the back support frame of min 25 x 25 x 3mm angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.The sign shall be maintained as per section 12 of IRC:67:2012. (ii) 90 cm equilateral triangle ---- including cost of all materials, with all lead lift, transporting to site, loading unloading, labour charges, HOM, etc complete as per specifications as per directions of Engineer-in-charge of Work.

Vol-3 Page No. 65 Sl NO 8.7 - Direction and Place Identification Signs upto 0.9 m2 Size Board Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67:2012 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4mm with area not exceeding 0.9 m2 fixed over back support frame of min 35 x 35 x 3mm angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing ---- including cost of all materials, with all lead lift, transporting to site, loading unloading, labour charges, HOM, etc complete as per specifications as per directions of Engineer-in-charge of Work.