Public Works Department Tender

SR 2023-24 V-III PNo17 I No 3.4ii - Scarifying Existing Granular Surface to a Depth of 50 mm by Mechanical Means using Hydraulic excavator ---- including cost and conveyance of all materials, loading

SR 2023-24 V-III Page No 23 Item No. 4.1A (V) - Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 For Grading -V Material ---- including cost and conveyance of all materials, loading

SR 2023-24 V-III P.No 26 I No - 4.17 - Wet Mix Macadam (Plant Mix Method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density ---- including cost and conveyance of all materials, loading

SR 2023-24 V-III P.No -31 I No - 5.1 A (i) - Prime Coat over WMM/WBM Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanical means. ( SR 2023-24 V-III P.No -31 I No - 5.1 A (i) ) ---- including cost and conveyance of all materials, loading

SR 2023-24, VOL 3, P No:33, Item No:5.8 C - Bituminous Macadam Grading-II Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.4% by weight of mix, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction (SR 2023-24, VOL 3, P No:33, Item No:5.8 C) ---- including cost and conveyance of all materials, loading

SR 2023-24 V-III P.No- 31 I.No: 5.33 - Providing and applying tack coat with VG-10 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on the prepared bituminous surface cleaned with mechanical broom ( SR 2023-24 V-III P.No- 31 I.No: 5.33) ---- including cost and conveyance of all materials, loading

SR 2023-24 VOL 3 P No:43 Item No:5.31 - Semi Dense Bituminous Concrete Grading-II Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight of mix and filler, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per MoRTH V revision.(SR 2023-24 VOL 3 P No:43 Item No:5.31) ---- including cost and conveyance of all materials, loading

SR 2023-24 V - III P.No-17 I.No 3.6 - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2(SR 2023-24 V - III P.No-17 I.No 3.6) ---- including cost and conveyance of all materials, loading

SR 2023-24 V - III P.No- 67 I.No 8.15 - Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35:2015.The finished surface to be level, uniform and free from streaks and holes. (SR 2023-24 V - III P.No- 67 I.No 8.15 ) ---- including cost and conveyance of all materials, loading

SR 2023-24 V - III P.No- 74 I.No 8.43 - Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 cm2 on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. (SR 2023-24 V - III P.No- 74 I.No 8.43 ) ---- including cost and conveyance of all materials, loading

SR 2023-24,Vol- III , P.No- 67 I.No 8.16 (ii) - Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc Ordinary kilometer stone (precast) (SR 2023-24,Vol- III , P.No- 67 I.No 8.16 (ii) ---- including cost and conveyance of all materials, loading

Vol- III , P.No- 67 I.No 8.16 (iii) - Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc 200 m stone (precast) (Vol- III , P.No- 67 I.No 8.16 (iii) ---- including cost and conveyance of all materials, loading

SR 2023-24 Vol- III , P.No- 64 I.No 8.5 (ii) - Retro-Reflectorised Traffic Signs Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class B Type IV retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 803.1, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over the back support frame of min 25 x 25 x 3mm angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.The sign shall be maintained as per section 12 of IRC:67:2022.90 cm equilateral triangle (SR 2023-24 Vol- III , P.No- 64 I.No 8.5 (ii)) ---- including cost and conveyance of all materials, loading

SR 2023-24 Vol- III , P.No- 65 I.No 8.7 - Direction and Place Identification Signs upto 0.9 m2 Size Board. Providing and erecting direction and place identification retro reflectorised sign as per IRC:67:2022 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4mm with area not exceeding 0.9 m2 fixed over back support frame of min 35 x 35 x 3mm angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing. ( SR 2023-24 Vol- III , P.No- 65 I.No 8.7) ---- including cost and conveyance of all materials, loading

SR 2023-24 Vol- III , P.No- 80 I.No 8.60.1 - Providing Speed Breakers/Raised pedestrian crossings inTrapezoidal section with 2.5 m Top width and transition length of 0.8 m length and height of 0.1 m as per IRC 99:2018 using Bituminous Macadam (BM) Gr II and Semi Dense Bituminous Macadam (SDBC) Gr II for entire formation width & WBM Gr II for Shoulder hump portion only (150 mm thick), completing with road marking paint with applied thermoplastic compound with reflecting glass beeds on bituminous surface and providing 2 Nos. retro reflective traffic signs as per IRC 67 -2022:Intermediate lane with formation width of 7.50 m( SR 2023-24 Vol- III , P.No- 80 I.No 8.60.1) ---- including cost and conveyance of all materials, loading

SR 2023-24 Vol- III , P.No- 78 I.No 8.54 - Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge & MoRTH specification 804(SR 2023-24 Vol- III , P.No- 78 I.No 8.54) ---- including cost and conveyance of all materials, loading