Get tender documents at just ₹200 per tenderKnow More
Search made simple for latest tendersNo hidden charges. No keyword restrictionsExplore Our Plansor Pay Per Tender

Bid Number: GEM/2019/B/312252 Dated: 05-08-2019 Bid Document Bid Details Bid End Date/Time 13-08-2019 10:00:00 Bid Life Cycle (From Publish Date) 90 (Days) Bid Offer Validity (From End Date) 45 (Days) Ministry/State Name Pmo Department Name Na Organisation Name N/a Office Name Isro Satellite Centre Total Quantity 300 Item Category Light Emitting Diode LED Fixture- LED tube light ( PAC Only ) MSE Exemption For Years Of Experience And Turnover Yes Startup Exemption For Years Of Experience And Turnover Yes Bid to RA enabled No Light Emitting Diode LED Fixture- LED Tube Light ( 300 pieces ) ( Under PAC ) Make cromptongreaves Model cromptongreaves)(tubelight20wattmodelno- lt8-20-865-2retroledt8 Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) GENERIC Led tube light power rating corresponding Min Luminious flux 20 Watt/2000 lumen 20 Watt/2000 lumen Colour Temperature (K) 6500 6500 1 / 4 Warranty for free replacement (Years) 2 years 2 years CONSTRUCTIONAL Type of Tube Light Cap G-13 Bi-pin * Ingress Protection in IP IP 20 * Lamp Shell material Polycarbonate Polycarbonate LED Fixture With Al back, front with polycarbonate/Acrylic diffuser more than 85%efficiency of lig Without * Light Source SMD LED Chip * LED Make Crompton Greaves * Length of tube light (Nominal) (in mm) 1220 * FUNCTIONAL LED lamp efficacy (Lm/W) 100 * Colour Rendering Inde (CRI) > / = 80 * Total Harmonics (%) < / = 15% * LED Tubelight Life of 25000 hours predicted as per TM21 Report on Data obtained as per test conducted for 6000 hours as per LM80 Yes * Temperature Cycling test and supply voltage switching test (1) product shall be subjected to minus 10 degree C for 1 hour then switch to 50 degree C for 1 hour in total 5 cycles (2)30 sec ON and 30 sec Off At the end of test as per (1) and (2) no visual damage shall be observed and light should alight for more than 15 min after the test Yes * Beam Angle (Degree) > / = 120 degree * Operating Voltage range (Volt) 100-300 * Driver Efficiency (%) more than 85% * Surge Voltage withstand (KV) 2.5 KV * 2 / 4 LED Chip Efficacy (Lm/W) 130 * Rated Voltage for Performance and life (Volt) 220-240 * Lumen Maintenance at 25 deg;C after 6000 hrs (%) 80% * LED Chip Wattage (Individual) (Watt) 0,25 * Power Factor > / = 0.9 * CERTIFICATIONS BIS Registration certificate under (CRS) number and date 7894207 * Certificare for Luminaire photometric data as per LM79 Yes * Certificate No and Date of Luminaire photometric data as per LM 79 report T6351dt 27.09.2017 * Compulsory Registration and CRS of BIS for safety to IS 10322 Pt 5 Sec 1 2012 Yes * EMC Test Yes * * Bold specifications are the golden parameters. * Bidders may note that In respect of non-golden Parameters, the specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer. Consignees/Reporting Officer and Quantity S.No. Consignee/Reporti ng Officer Address Quantity Delivery Days 1 Meena K 560017,U R RAO SATELLITE CENTRE (URSC) DEPARTMENT OF SPACE OLD AIRPORT ROAD,VIMANAPURA PO 300 16 EMD Detail Required No ePBG Detail Required No Splitting 3 / 4 Bid splitting not applied. Special terms and conditions for category Light Emitting Diode LED Fixture- LED tube light 1) LED Tube Light with Fixture includes its complete fittings Buyer Specific Additional Terms and Conditions 1.Procurement under this bid is reserved for purchase from : Local Supplier as defined in Public Procurement Preference to Make in India Order 2017 and its subsequent Orders Notifications issued by concerned Nodal Ministry for specific Goods/ Products. 2.Purchase preference will be given to MSME and Startup (Local supplier) : (if L-1 is not from selected category and 4 / 5 Seller (s) from selected category has/have quoted price within L-1 + perce

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.