Petronet Mhb Limited Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Petronet Mhb Limited Tender
Security and Emergency Services
GEM
Opening Date30 Jan 2025
Closing Soon14 Feb 2025
Tender Amount₹ 61,50,000
Costs
EMD
₹ 1,20,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
GEM/2025/B/5890153Tender No
GEM/2025/B/5890153Tender Authority
Petronet Mhb Limited ViewPurchaser Address
-Website
http://bidplus.gem.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
list-of-categories-where-trials-are-allowed_1712126171.pdf
BOQ Items
... More
Refilling-CO2-4.5 Kg Fire Extinguisher
"Refilling-CO2-4.5Kg FireExtinguisher confirming to IS :307-1966:
Refilling to be done as and when required or as per the instruction of Officer In-charge. The refilling to be done by outside Firm Competent to do so. Job shall include all tools tackles and manpower and also to include removing, filling and repositioning at the same place., Transportation is under Vendors scope"
179
-
-
... More
Refilling-CO2- 2/3/3.5Kg FireExtinguisher
"Refilling-CO2-2/3/3.5Kg FireExtinguisher confirming to IS :307-1966:
Refilling to be done as and when required or as per the instruction of Officer In-charge. The refilling to be done by outside Firm Competent to do so. Job shall include all tools tackles and manpower and also to include removing, filling and repositioning at the same place., Transportation is under Vendors scope"
91
-
-
... More
Hydrotesting-CO2- 2/3/3.5Kg Extinguisher
"Hydrotesting-CO2-2/3/3.5Kg Fire Extinguisher:
• Carbon dioxide fire extinguishers shall be tested as per IS:5844-1970 (Reaffirmed 2006)
• The test pressure shall be 250 kg/ cm2 (As per the IS 2190:2010 )
• Test certificate shall be submitted and shall be valid for further five years.
• Test facility shall be approved by CCE, Nagpur
• Check nut/seal nut of gas cartridge (if require replacement)shall be as per IS 4949:2006"
106
-
-
... More
Hydrotesting-CO2-4.5 Kg Extinguisher
"Hydrotesting-CO2-4.5Kg Fire Extinguisher:
• Carbon dioxide fire extinguishers shall be tested as per IS:5844-1970 (Reaffirmed 2006)
• The test pressure shall be 250 kg/ cm2 (As per the IS 2190:2010 )
• Test certificate shall be submitted and shall be valid for further five years.
• Test facility shall be approved by CCE, Nagpur
• Check nut/seal nut of gas cartridge (if require replacement)shall be as per IS 4949:2006"
139
-
-
... More
Hydrotesting-CO2-6.5 Kg Extinguisher
"Hydrotesting-CO2-6.5Kg Fire Extinguisher:
• Carbon dioxide fire extinguishers shall be tested as per IS:5844-1970 (Reaffirmed 2006)
• The test pressure shall be 250 kg/ cm2 (As per the IS 2190:2010 )
• Test certificate shall be submitted and shall be valid for further five years.
• Test facility shall be approved by CCE, Nagpur
• Check nut/seal nut of gas cartridge (if require replacement)shall be as per IS 4949:2006"
55
-
-
... More
Hydrotesting-CO2-9.0 Kg Extinguisher
"Hydrotesting-CO2-9.0Kg Fire Extinguisher:
• Carbon dioxide fire extinguishers shall be tested as per IS:5844-1970 (Reaffirmed 2006)
• The test pressure shall be 250 kg/ cm2 (As per the IS 2190:2010 )
• Test certificate shall be submitted and shall be valid for further five years.
• Test facility shall be approved by CCE, Nagpur
• Check nut/seal nut of gas cartridge (if require replacement)shall be as per IS 4949:2006"
1
-
-
... More
Hydrotesting-ABC-9 Kg Fire Extinguisher
"Hydrotesting-ABC-9 Kg Fire Extinguisher:
• ABC Dry Chemical Powder Fire Extinguishers shall be tested as per IS: 2190:2010
• Test pressure shall be 35 kg/cm2 for a period of 2.5 minutes
• Test certificate shall be submitted and shall be valid for three further three years."
193
-
-
... More
"Hydrotesting-4Kg CleanAgentExtinguisher:
• Clean Agent Extinguisher shall be tested as per IS: 2190:2010
• Test pressure shall be 35 kg/cm2 for a period of 2.5 minutes
• Test certificate shall be submitted and shall be valid for three further three years."
11
-
-
... More
Painting- Hose Box
The hose cabinet shall be painted with 3 coats of anticorrosive fire red paint conforming to shade no. 536 of IS: 5 from outside and white paint from inside. The paint shall conform to IS:2932.
65
-
-
... More
Refilling of CO2 Catridge(100- 200Gms)
"REFILLING & PAINTING OF CO2 CARTRIDGE:
REFILLING & PAINTING OF CO2 CARTRIDGE (100 TO 200 GRMS) The gas CO2 will be confirming to IS 307-1966 & silver painting on the cartridge before refilling"
95
-
-
... More
"Painting of Fire Bucket: Painting of Fire Buckets with approved enamel paint as advised by OfficerIn charge. The surface is to
be scrapped to bare metal manually by using wire brush, chipping hammer, emery paper etc., after which two coats of zinc phosphate primer to be applied over which two coats of synthetic enamel finish paint of approved colour and shade to be applied.Thepaint should be of Asian/Berger make or of any reputed manufacturer (as decided by Officer-In- charge) . All the materials including paint, brush, cleaning tools & tackles,labour,supervisionetc. are to be supplied by the contactor"
125
-
-
... More
Painting -4Kg Clean Agent Extinguisher
"Painting of 4Kg Clean Agent Fire Extinguisher: Extinguisher shall be painted with fire red should be as per IS 15683:2006. Painting of fire extinguishers should be done as and when required as per instructions of Officer- In-charge. The surface is to be scrapped to bare metal manually by using wire brush, chipping hammer, emery paper etc., after which two coats of zinc phosphate primer to be applied over which two coats of synthetic enamel finish paint of approved colour and shade to be applied. The paint should be of Asian/Berger make or of any reputed manufacturer (as decided by Officer-ln- charge).All the materials includingpaint, brush, clearing tools &tackles, labour, supervision etc. are to be supplied by the contractor"
11
-
-
... More
Painting of ABC-9 Kg Fire Extinguisher
"Painting of ABC-9 Kg Fire Extinguisher: Extinguisher shall be painted with fire red should be as per IS 15683:2006. Painting of fire extinguishers should be done as and when required as per instructions of Officer- In-charge. The surface is to be scrapped to bare metal manually by using wire brush, chipping hammer, emery paper etc., after which two coats of zinc phosphate primer to be applied over which two coats of synthetic enamel finish paint of approved colour and shade to be applied. The paint should be of Asian/Berger make or of any reputed manufacturer (as decided by Officer-ln- charge).All the materials includingpaint, brush, clearing tools &tackles, labour, supervision etc. are to be supplied by the contractor"
195
-
-
... More
Painting of DCP-9 Kg Fire Extinguisher
Painting of fire extinguishers should be done as and when required as per instructions of Officer- In-charge. The surface is to be scrapped to bare metal manually by using wire brush, chipping hammer, emery paper etc., after which two coats of zinc phosphate primer to be applied over which two coats of synthetic enamel finish paint of approved colour and shade to be applied. The paint should be of Asian/Berger make or of any reputed manufacturer (as decided by Officer-ln- charge).All the materials includingpaint, brush, clearing tools &tackles, labour, supervision etc. are to be supplied by the contractor"
96
-
-
... More
Painting of DCP-75 Kg Fire Extinguisher
Painting of fire extinguishers should be done as and when required as per instructions of Officer- In-charge. The surface is to be scrapped to bare metal manually by using wire brush, chipping hammer, emery paper etc., after which two coats of zinc phosphate primer to be applied over which two coats of synthetic enamel finish paint of approved colour and shade to be applied. The paint should be of Asian/Berger make or of any reputed manufacturer (as decided by Officer-ln- charge).All the materials includingpaint, brush, clearing tools &tackles, labour, supervision etc. are to be supplied by the contractor"
10
-
-
... More
Painting of DCP-10 Kg Fire Extinguisher
Painting of fire extinguishers should be done as and when required as per instructions of Officer- In-charge. The surface is to be scrapped to bare metal manually by using wire brush, chipping hammer, emery paper etc., after which two coats of zinc phosphate primer to be applied over which two coats of synthetic enamel finish paint of approved colour and shade to be applied. The paint should be of Asian/Berger make or of any reputed manufacturer (as decided by Officer-ln- charge).All the materials includingpaint, brush, clearing tools &tackles, labour, supervision etc. are to be supplied by the contractor"
140
-
-
... More
Painting of CO2-9.0 Kg Fire Extinguisher
Painting of CO2 fire extinguishers shall be done as and when required as per instructions of Officer- In-charge. The surface is to be scrapped to bare metal manually by using wire brush, chipping hammer, emery paper etc., after which two coats of zinc phosphate primer to be applied over which two coats of synthetic enamel finish paint of approved colour and shade to be applied. The paint should be of Asian/Berger make or of any reputed manufacturer (as decided by Officer-In-charge). All the materials including paint, brush, cleaning tools & tackles, labor, supervision etc. are to be supplied by the Contractor."
1
-
-
... More
Painting of CO2-6.5 Kg Fire Extinguisher
"Painting of CO2-6.5 Kg Fire Extinguisher: Extinguisher shall be painted with fire red should be as per IS 15683:2006
Painting of CO2 fire extinguishers shall be done as and when required as per instructions of Officer- In-charge. The surface is to be scrapped to bare metal manually by using wire brush, chipping hammer, emery paper etc., after which two coats of zinc phosphate primer to be applied over which two coats of synthetic enamel finish paint of approved colour and shade to be applied. The paint should be of Asian/Berger make or of any reputed manufacturer (as decided by Officer-In-charge). All the materials including paint, brush, cleaning tools & tackles, labor, supervision etc. are to be supplied by the Contractor."
60
-
-
... More
Painting of CO2-4.5 Kg Fire Extinguisher
"Painting of CO2-4.5 Kg Fire Extinguisher: Extinguisher shall be painted with fire red should be as per IS 15683:2006
Painting of CO2 fire extinguishers shall be done as and when required as per instructions of Officer- In-charge. The surface is to be scrapped to bare metal manually by using wire brush, chipping hammer, emery paper etc., after which two coats of zinc phosphate primer to be applied over which two coats of synthetic enamel finish paint of approved colour and shade to be applied. The paint should be of Asian/Berger make or of any reputed manufacturer (as decided by Officer-In-charge). All the materials including paint, brush, cleaning tools & tackles, labor, supervision etc. are to be supplied by the Contractor."
168
-
-
... More
Painting -CO2-2/3/3.5Kg FireExtinguisher
"Painting of -CO2-2/3/3.5KgExtinguisher: Extinguisher shall be painted with fire red should be as per IS 15683:2006
Painting of CO2 fire extinguishers shall be done as and when required as per instructions of Officer- In-charge. The surface is to be scrapped to bare metal manually by using wire brush, chipping hammer, emery paper etc., after which two coats of zinc phosphate primer to be applied over which two coats of synthetic enamel finish paint of approved colour and shade to be applied. The paint should be of Asian/Berger make or of any reputed manufacturer (as decided by Officer-In-charge). All the materials including paint, brush, cleaning tools & tackles, labor, supervision etc. are to be supplied by the Contractor."
95
-
-
... More
Hydrotesting of Fire Hose-15M
The hoses are to be pressure tested once in 6 months at a pressure of 7.5kg/sq.cm to with stand for 2 minutes with the help of hydro testing pressure pump. Necessary record is to be maintained. In case, the fire hose is damaged during the Pressure testing the same has to be replaced by the Contractor at his own cost."
630
-
-
... More
Refilling of SCBA Cylinder
Refilling with Breathing Air as per EN12021 breathing air quality standards.
27
-
-
... More
Refilling of EEBD Cylinder
Refilling with Breathing Air as per EN12021 breathing air quality standards to the Emergency Escape Breathing Device
30
-
-
... More
Hydro Testing of SCBA cylinder
The procedure to be followed as per Gas Cylinder Rule 2016
1. First de-gas the cylinder with suitable method.
2. Open the valve and other fitting, if any.
3. Inspect cylinder externally and get it weighed, cross check the % of weight Loss.
4. Fill the water without air provision.
5. Connect the connection of cylinder and test pump.
6. Take initial reading of water in water tube R1.
7. Now raise the required test pressure and observe reading R2 in water tube.
8. Observe the leakage, building of diameter or any abnormal expansion of cylinder. Hold the pressure for 120 seconds.
18
-
-
... More
Hydro Testing of EEBD cylinder
The procedure to be followed as per Gas Cylinder Rule 2016
1. First de-gas the cylinder with suitable method.
2. Open the valve and other fitting, if any.
3. Inspect cylinder externally and get it weighed, cross check the % of weight Loss.
4. Fill the water without air provision.
5. Connect the connection of cylinder and test pump.
6. Take initial reading of water in water tube R1.
7. Now raise the required test pressure and observe reading R2 in water tube.
8. Observe the leakage, building of diameter or any abnormal expansion of cylinder. Hold the pressure for 120 seconds.
14
-
-
... More
Hydrotesting-DCP 75Kg Fire Extinguisher:
• Dry Chemical Powder Fire Extinguishers shall be tested as per IS: 2190:2010
• Test pressure shall be 35 kg/cm2 for a period of 2.5 minutes
• Test certificate shall be submitted and shall be valid for three further three years.
9
-
-
... More
Hydrotesting- DCP -9 Kg Fire Extinguisher:
• Dry Chemical Powder Fire Extinguishers shall be tested as per IS: 2190:2010
• Test pressure shall be 35 kg/cm2 for a period of 2.5 minutes
• Test certificate shall be submitted and shall be valid for three further three years.
57
-
-
... More
Hydrotesting-DCP 10 Kg Fire Extinguisher
• Dry Chemical Powder Fire Extinguishers shall be tested as per IS: 2190:2010
• Test pressure shall be 35 kg/cm2 for a period of 2.5 minutes
• Test certificate shall be submitted and shall be valid for three further three years.
154
-
-
... More
Painting of Fire hydrants
Providing and applying of 1 Coat of Mastic Primer + 2 Coats of Epoxy of approved make (Asian/Berger make) of approved colour to Fire hydrants inside the station as per requirement by rubbing the existing surfaces using sand paper and making the surface smooth including scaffolding if required, labour, paint material, cleaning and painting accessories, tools & tackles etc., complete as per the instructions of Engineer In Charge. The surface to receive the paint to be cleaned of all dirt’s, stains rusts, oil marks.
110
-
-
... More
Painting-Water/Foam Monitor
Foam/Water Monitor shall be painted with fire red or post office red colour conforming to shade No. 536 or 538 of IS 5. The paint shall conform to IS 2932
Painting of Foam/Water Monitor shall be done as and when required as per instructions of Officer- In-charge. The surface is to be scrapped to bare metal manually by using wire brush, chipping hammer, emery paper etc., after which two coats of zinc phosphate primer to be applied over which two coats of synthetic enamel finish paint of approved colour and shade to be applied. The paint should be of Asian/Berger make or of any reputed manufacturer (as decided by Officer-In-charge). All the materials including paint, brush, cleaning tools & tackles, labor, supervision etc. are to be supplied by the Contractor.
23
-
-
... More
Rebinding of Fire Hose
"Rebinding of Fire Hose:
• Check the hose condition during hydrotesting.
• If hose condition is ok, as long as the hose still has enough length to be effective in the field it can be cut and refitted "
20
-
-
... More
Monthly Service-4Kg Clean Agent
"Monthly Service-4Kg Clean Agent
Check List:
• Check the gauge to make sure it is charged and not damaged. Does the unit have the proper hanging brackets.
• Complete an external examination of the shell and components for damage, corrosion, dents, or wear.
• Examine the handle including the pin and anti-tamper seal. Remove seal.
• Check the Condition of Hose
• Remove the hose and inspect for any blockage from dirt or insects. Look inside the port to see any signs of powder are left over from a discharge.
• If there is any evidence that it has been used it must be recharged."
264
-
-
... More
"Monthly Service-Fire Bucket:
The existing Fire Buckets are to be cleaned and checked for any breakage due to corrosion and same has to be replaced as advised by Officer In charge. The wet sand to be dried on monthly basis and same has to be refilled in Fire Buckets"
1656
-
-
... More
"Monthly Service-Hand Operated Siren:
Hand operated siren has to be cleaned and greased on monthly basis; Job should also include checking of proper functioning of HandOperatedsiren, If Any repair jobs to be done can be done at extra actuals"
288
-
-
... More
Monthly Service-Fire/Water Monitor
"Monthly Service-Fire/Water Monitor:
The monitor shall to be operated in 360deg. In either direction in Horizontal plane or +90deg.
&-15deg. In vertical plane. Greasing of worm gear to be done. Checking theconditions of PVC pick-up tube along with foam branch tube"
504
-
-
... More
Monthly Service-Double Hydrant Valve
"Monthly Service-Fire Double Hydrant Valve:
TheDouble Hydrants to be cleaned and greased.Anyleakagethrough the hydrants to be arrested and if needed washer in the coupling to be replaced.Supply of washer will be paid under separate item"
1584
-
-
... More
"Monthly Service-Fire Hose-15M:
Thejobincludestakingout the firehoses fromhosebox/Foamtender/warehouse;generalcleaning of fire hoses and the hose boxes (both inner and outer side), checking the condition of coupling and intimating the concerned officer about therepair. And the same repair has to be attended at extra actuals"
3144
-
-
... More
"Monthly Service-ABC-9 Kg Extinguisher
Check List:
• Check the gauge to make sure it is charged and not damaged. Does the unit have
the proper hanging brackets.
• Complete an external examination of the shell and components for damage, corrosion, dents, or wear.
• Examine the handle including the pin and anti-tamper seal. Remove seal.
• Check the Condition of Hose
• Remove the hose and inspect for any blockage from dirt or insects. Look inside the port to see any signs of powder are left over from a discharge.
• If there is any evidence that it has been used it must be recharged.
• Weigh the extinguisher, compare mass against the mass marked on it for fully, charged extinguisher. It should be sent for refilling if the loss is more than 10 per cent of mass. Clean and polish externally"
4728
-
-
... More
"Monthly Service-DCP-9 Kg Extinguisher:
Scope of Work:
• Unscrew and remove the cap with the safety clip, check for cracks and other damages, of the cap and the body. Check the condition of the threading within the cap and on the neck of the main body. Check
the condition of cap washer and replace, if necessary.
• Un screw and remove the cartridge.
• Remove the safety clip; Check for free operation of the plunger/piercing mechanism, springmechanism for its proper functioning and do necessary lubrication. • Check the port holes in the cartridge holder, inner container, if necessary clean them.
• Ensure the rubber gasket in the cap is in good condition. If this is deteriorated, replace the gasket. ‘
• Check for intactness of seating of cartridge. Weigh the cartridge and compare the weight with the stamped weight: If a loss of 10% or more in the weight of gas is noticed, replace it with a fully charged cartridge. The cartridge with underweight to be taken out and recharged by a firm competent to do so. (Refilling of cartridge will be paid under separate item of SOR.)
• Remove the powder from the cylinder, check the condition of the Dry Chemical Powder, if there is clogging or granulation of the powder, dry the powder in open, sieve through a fine mesh and recharge till the required height of DCP. If the condition of the DCP powder is very poor, replace with fresh powder. Mark the dry chemical powder filling height.
• Check the condition and free operation of syphon tube; discharge hose by flow of air, check for free operation of the nozzle and discharge fittings. Clean the exterior of the extinguisher and polish the painted portion with wax polish, brass/gun metal parts with metal polish and plastic components are to be thoroughly cleaned and sun dried.
• Changing of different spare parts/DCP powder/CO2 cartridges (if required) supplied by PMHBL also should be carried out during the servicing.
1220
-
-
... More
Monthly Service-DCP-75 Kg Extinguisher
Scope of Work:
• Unscrew and remove the cap with the safety clip, check for cracks and other damages, of the cap and the body. Check the condition of the threading within the cap and on the neck of the main body. Check
the condition of cap washer and replace, if necessary.
• Un screw and remove the cartridge.
• Remove the safety clip; Check for free operation of the plunger/piercing mechanism, springmechanism for its proper functioning and do necessary lubrication. • Check the port holes in the cartridge holder, inner container, if necessary clean them.
• Ensure the rubber gasket in the cap is in good condition. If this is deteriorated, replace the gasket. ‘
• Check for intactness of seating of cartridge. Weigh the cartridge and compare the weight with the stamped weight: If a loss of 10% or more in the weight of gas is noticed, replace it with a fully
charged cartridge. The cartridge with underweight to be taken out and recharged by a firm competent to do so. (Refilling of cartridge will be paid under separate item of SOR.)
• Remove the powder from the cylinder, check the condition of the Dry Chemical Powder, if there is clogging or granulation of the powder, dry the powder in open, sieve through a fine mesh and recharge till the required height of DCP. If the condition of the DCP powder is very poor, replace with fresh powder. Mark the dry chemical powder filling height.
• Check the condition and free operation of syphon tube; discharge hose by flow of air, check for free operation of the nozzle and discharge fittings. Clean the exterior of the extinguisher and polish the painted portion with wax polish, brass/gun metal parts with metal polish and plastic components are to be thoroughly cleaned and sun dried.
• Changing of different spare parts/DCP powder/CO2 cartridges (if required) supplied by PMHBL also should be carried out during the servicing.
216
-
-
... More
"Monthly Service-DCP-10 Kg Extinguisher:
Scope of Work:
• Unscrew and remove the cap with the safety clip, check for cracks and other damages, of the cap and the body. Check the condition of the threading within the cap and on the neck of the main body. Check
the condition of cap washer and replace, if necessary.
• Un screw and remove the cartridge.
• Remove the safety clip; Check for free operation of the plunger/piercing mechanism, springmechanism for its proper functioning and do necessary lubrication. • Check the port holes in the cartridge holder, inner container, if necessary clean them.
• Ensure the rubber gasket in the cap is in good condition. If this is deteriorated, replace the gasket. ‘
• Check for intactness of seating of cartridge. Weigh the cartridge and compare the weight with the stamped weight: If a loss of 10% or more in the weight of gas is noticed, replace it with a fully
charged cartridge. The cartridge with underweight to be taken out and recharged by a firm competent to do so. (Refilling of cartridge will be paid under separate item of SOR.)
• Remove the powder from the cylinder, check the condition of the Dry Chemical Powder, if there is clogging or granulation of the powder, dry the powder in open, sieve through a fine mesh and recharge till the required height of DCP. If the condition of the DCP powder is very poor, replace with fresh powder. Mark the dry chemical powder filling height.
• Check the condition and free operation of syphon tube; discharge hose by flow of air, check for free operation of the nozzle and discharge fittings. Clean the exterior of the extinguisher and polish the painted portion with wax polish, brass/gun metal parts with metal polish and plastic components are to be thoroughly cleaned and sun dried.
• Changing of different spare parts/DCP powder/CO2 cartridges (if required) supplied by PMHBL also should be carried out during the servicing.
3120
-
-
... More
Monthly Service-CO2-9.0 Kg Extinguisher
Scope of Work:
• Examine the cylinder externally for its condition of painting, rust formation, dents and cracks etc. • The cylinder should be detached and weighed on the Weighing scale. If it is less than 90% of the grossweight mentioned on the cylinder, the same should be taken out for refilling and brought back after refilling.
• Check the condition of discharge hose, discharge horn, handle, hose clamp, control valve, safety pin, chain and seal. The nozzle outlet should be free from clogging. Check neck ring and neck joint for damages. Replace the discharge tube or any other damaged parts, if required.
• Check the condition of near container bracketing & supports for rusting. Check copper tubing. Clean the exterior of the extinguisher and polish the painted portion with wax polish, brass/ gun metal parts with metal polish’ and plastic components are to be thoroughly cleaned and sun dried.
• In case of replacement of any part, charging/refilling, hydro testing etc., the same to be mentioned on the monthly report to enable entry in history card.
• The painting shall be checked for damage/ deterioration once in three months.
• Trolley shall be checked for proper functioning. Also lubricate the wheels.
• Date of Servicing should be written with white paint in a tabular format on the external Body of the extinguisher. Name of the person or agency performing the inspection/servicing to be mentioned on Fire extinguisher."
24
-
-
... More
Monthly Service-CO2-6.5 Kg Extinguisher
"Service-CO2-6.5 Kg FireExtinguisher:
Scope of Work:
• Examine the cylinder externally for its condition of painting, rust formation, dents and cracks etc. • The cylinder should be detached and weighed on the Weighing scale. If it is less than 90% of the grossweight mentioned on the cylinder, the same should be taken out for refilling and brought back after refilling.
• Check the condition of discharge hose, discharge horn, handle, hose clamp, control valve, safety pin, chain and seal. The nozzle outlet should be free from clogging. Check neck ring and neck joint for damages. Replace the discharge tube or any other damaged parts, if required.
• Check the condition of near container bracketing & supports for rusting. Check copper tubing. Clean the exterior of the extinguisher and polish the painted portion with wax polish, brass/ gun metal parts with metal polish’ and plastic components are to be thoroughly cleaned and sun dried.
• In case of replacement of any part, charging/refilling, hydro testing etc., the same to be mentioned on the monthly report to enable entry in history card.
• The painting shall be checked for damage/ deterioration once in three months.
• Trolley shall be checked for proper functioning. Also lubricate the wheels.
• Date of Servicing should be written with white paint in a tabular format on the external Body of the extinguisher. Name of the person or agency performing the inspection/servicing to be mentioned on Fire extinguisher."
1104
-
-
... More
Monthly Service-CO2-4.5 Kg Extinguisher
"Service-CO2-4.5 Kg FireExtinguisher:
Scope of Work:
• Examine the cylinder externally for its condition of painting, rust formation, dents and cracks etc. • The cylinder should be detached and weighed on the Weighing scale. If it is less than 90% of the grossweight mentioned on the cylinder, the same should be taken out for refilling and brought back after refilling.
• Check the condition of discharge hose, discharge horn, handle, hose clamp, control valve, safety pin, chain and seal. The nozzle outlet should be free from clogging. Check neck ring and neck joint for damages. Replace the discharge tube or any other damaged parts, if required.
• Check the condition of near container bracketing & supports for rusting. Check copper tubing. Clean the exterior of the extinguisher and polish the painted portion with wax polish, brass/ gun metal parts with metal polish’ and plastic components are to be thoroughly cleaned and sun dried.
• In case of replacement of any part, charging/refilling, hydro testing etc., the same to be mentioned on the monthly report to enable entry in history card.
• The painting shall be checked for damage/ deterioration once in three months.
• Date of Servicing should be written with white paint in a tabular format on the external Body of the
extinguisher. Name of the person or agency performing the inspection/servicing to be mentioned on Fire extinguisher."
3048
-
-
... More
MonthlyService-CO2- 2/3/3.5KgExtinguish er
Scope of Work:
• Examine the cylinder externally for its condition of painting, rust formation, dents and cracks etc. • The cylinder should be detached and weighed on the Weighing scale. If it is less than 90% of the grossweight mentioned on the cylinder, the same should be taken out for refilling and brought back after refilling.
• Check the condition of discharge hose, discharge horn, handle, hose clamp, control valve, safety pin, chain and seal. The nozzle outlet should be free from clogging. Check neck ring and neck joint for damages. Replace the discharge tube or any other damaged parts, if required.
• Check the condition of near container bracketing & supports for rusting. Check copper tubing. Clean the exterior of the extinguisher and polish the painted portion with wax polish, brass/ gun metal parts with metal polish’ and plastic components are to be thoroughly cleaned and sun dried.
• In case of replacement of any part, charging/refilling, hydro testing etc., the same to be mentioned on the monthly report to enable entry in history card.
• The painting shall be checked for damage/ deterioration once in three months.
• Date of Servicing should be written with white paint in a tabular format on the external Body of the
extinguisher. Name of the person or agency performing the inspection/servicing to be mentioned on Fire extinguisher."
2040
-
-
... More
Smoke detector tester
1. Item: Non-Flammable 250ml synthetic aerosol canister
2. Packaging Type: Aerosol canister
3. Usage: 250ml canister designed for use with fiberglass telescopic
access pole and Aerosol dispenser similar to Solo 330.
4. The aerosol must have the following characteristics.
a. Fast activation and clearing
b. No lasting residue
c. UL Listed
d. Non-toxic
e. Silicone-free
f.HFC-free and non-flammable solution
g.Should be Compliant with latest regulations
5. Clean synthetic aerosol that delivers particles replicating those found in the real smoke To the detector.
11
-
-
... More
DCP Extinguisher Nozzle-75Kg
"Supply of Nozzle for DCP Fire Extinguisher-75kg Nozzle shall be of trigger controlled and capable of discharging powder as per ISI specification
6
-
-
... More
"Safety Shoe, Size-10, Specification for the safety shoes: Soles: DIP PU Single density features, Shock absorber, oil resistant, All weather friendly, Fibre toe cap, Electrical Shock proof, Anti Skid, Conforming to IS-15298-Part II"
16
-
-
... More
"Safety Shoe, Size-09, Specification for the safety shoes: Soles: DIP PU Single density features, Shock absorber, oil resistant, All weather friendly, Fibre toe cap, Electrical Shock proof, Anti Skid, Conforming to IS-15298-Part II"
17
-
-
... More
"Safety Shoe, Size-08, Specification for the safety shoes: Soles: DIP PU Single density features, Shock absorber, oil resistant, All weather friendly, Fibre toe cap, Electrical Shock proof, Anti Skid, Conforming to IS-15298-Part II"
21
-
-
... More
Safety Shoe, Size-7
"Safety Shoe, Size-07, Specification for the safety shoes: Soles: DIP PU Single density features, Shock absorber, oil resistant, All weather friendly, Fibre toe cap, Electrical Shock proof, Anti Skid, Conforming to IS-15298-Part II"
14
-
-
... More
ABC Fire extinguisher Washer-9Kg
Suitable wahser to be provided for the 9 KG ABC extinguishers
104
-
-
... More
Foam ear Plug SNR: 33db as per CE EN 352-2. NRR 32 db as per ANSI S3 19-1974. Material: PU Rebound time: 45-60s Size: 13*24mm Cord Material/length: Polyester / 70 cm Packed in individual poly bag. Standard packing of 50 pcs / pack. Disposable Type.
110
-
-
... More
Ear Muff
"Ear Muff:
Modern, attractive low-profile design, Lightweight, Twin headband design for outstanding balance and comfort, Electrically-insulated wire headband, Soft wide cushions help maintain a comfortable pressure around the ears, New innovative foam earcup inserts and spacers that help improve attenuation, New ear cushion foam technology for an effective acoustic seal and reliable protection, Easy-to-replace cushions and inserts help keep them clean, Hard hat-attached version fits directly to many hard hats without an adapter, Noise reduction rating:21dB" hard hats without an adapter, Noise reduction rating:21
19
-
-
... More
Face Sheild
"Face Sheild
MOC:High impact resistance ABS., Flip-up and ratchet type adjustment, Large cover area for user’s forehead, providing full protection, Complied with CE EN166, ANSI Z87+, CSA Z94.3
27
-
-
... More
"Nose Mask-Dust Respirators
Specification:Model: Face piece, Material: Polyproplene, Type: Pollution Mask
Features: Designed to help provide comfortable reliable worker respiratory protection against non-oil based particles, Material: Polyproplene
Two-strap design with welded point attachment helps provide a secure seal
Features proprietary cool flow valve that reduces heat build-up inside the respirator, Cool FlowValve reduces heat, moisture, and fogging
Protects against certain non-oil-based products" inside the respirator, Cool FlowValve reduces heat, moisture, and fogging
Protects against certain non-oil-based products"
88
-
-
... More
Half Mask Air Respirator(Catridge Type)
"Half Mask Air Respirator(Catridge Type)
Harness Type 4 point
MOC: Primary Material Thermoplastic Elastomer (TPE)
Product Series Half Mask 6000 Series
Product Type Half Face Mask
Size M
Standards/Approvals EN 140:1998, CE Approved" Series Half Mask 6000 Series
28
-
-
... More
"Eye Protection Goggels:
Leg material Nylon, Lens material Polycarbonate, Lens thickness 2.2mm
Lens curvature 4 base spherical, Lens coating Uncoated, UVA and UVB 99.9% protection, Safety standard :EN 166
109
-
-
... More
"PVC Hand Gloves:
Made of 100% highly purified natural latex, Smooth finish on palm, Beaded cuff, Sizes: “12 inch, Coating: Single dip/Double dips Color: Blue"
104
-
-
... More
"Leather Hand Gloves-12""
Shall have uniform leather thickness as per IS 578 -1985, Thread variety No. of IS -1720 -1978
Good quality chrome tanned cow/young buffalo split leather as per IS
shall be used for palm, finger's back and front cuff, Leather for back cuff and reinforcement pieces shall be dyed in brown colour and grain printed, The leather used for palm, finger's back and the front cuff shall be of natural colour, The thick ness of the leather shall be from 1.5 to 1.8 mm, The nylon thread pf sewing cotton 60 S/6 (Variety No. 31 of IS) shall be used.
The gloves shall be machine stitched and the number of stitches shall be per cm, It shall have the double line stitching at reinforcement.
19
-
-
... More
"Leather Hand Gloves-10""
Shall have uniform leather thickness as per IS 578 -1985, Thread variety No. of IS -1720 -1978
Good quality chrome tanned cow/young buffalo split leather as per IS
shall be used for palm, finger's back and front cuff, Leather for back cuff and reinforcement pieces shall be dyed in brown colour and grain printed, The leather used for palm, finger's back and the front cuff shall be of natural colour, The thick ness of the leather shall be from 1.5 to 1.8 mm, The nylon thread pf sewing cotton 60 S/6 (Variety No. 31 of IS) shall be used.
The gloves shall be machine stitched and the number of stitches shall be per cm, It shall have the double line stitching at reinforcement.
22
-
-
... More
"MS Hose Box:
Supply of MS Hose Box made of 16 guage sheet wall mounting type in 750mm*600mm*250mm )size to accommodate two lengths of 15m hose and a short branch pipe with glass fixed single door with lock and key arrangements " of 15m hose and a short branch pipe with glass fixed single door with lock and key arrangements "
20
-
-
... More
Electrical Rubber insulated seam less hand Gloves-11KV
IS4770-1991 or EN 60903-IEC 903
Class 3,Length:385mm,Size:10/11
Working Potential:11000V
Test Potential :17000V
24
-
-
... More
Electrical Rubber insulated seam less hand Gloves-6.6KV
IS4770-1991 or EN 60903-IEC 903
Class 1,Length:385mm,Size:10/11
Working Potential:7500V
Test Potential :10000V
10
-
-
... More
Electrical Rubber insulated seam less hand Gloves-66KV
IS4770-1991 or EN 60903-IEC 903
Length:385mm,Size:10/11
Working Potential:66000V
Test Potential :132000V
2
-
-
... More
"Cotton Knitted Hand Gloves:
100% Cotton, 7 gauge, 2""-4"" cuff, Knit construction allows breathability with less hand fatigue, seamless pattern increase comfort, Cuff Style : Continuous knit
888
-
-
... More
PVC/Rubber Picking tube
Supply of PVC/Rubber Pickup tube -4.0metre long with camlock coupling for fire water cum foam monitor branch Supply of PVC/Rubber Pickup tube -4.0metre long with camlock coupling for fire water cum foam monitor branch
21
-
-
... More
Hand Operated Siren-1Km radius
Range-1.0Kms radius, Ration:1/25, Body Material: Aluminium casting, Fitment stand moiunted with IP65 protection, With Fixing Stand"
4
-
-
... More
"Fire Hydrant Valve-63mm, Single Headed Hydrant Valve:Gun Metal 2.5”(63mm) Single headed fire hydrant valve-75m. NB –Flanged inlet with 63mm female inst. Oblique outlet with ABS blank cap and chain as per IS:5290 bearing ISI mark (Flange OD-200mm, PCD 160mm- 04 Nos X 19mm dia.holes)" Nos X 19mm dia.holes)"
46
-
-
... More
DCP Extinguisher Hose-75Kg
Supply of Hose for DCP Fire Extinguisher-75Kg, length of the hose shall be of 5m with bursting pressure not less than 5 kg/cm2. Supply of Hose for DCP Fire Extinguisher-75Kg, length of the hose shall be of 5m with bursting pressure not less than 5 kg/cm2.
7
-
-
... More
Fire Hose Box Key
Supply of Fire Hose box key suitable fire hose box installed at PMHBL
43
-
-
... More
Wind Socks
"RED AND WHITE WIND SOCKS
SPECIFICATION OF WIND SOCKS
A.Shall be made of polyester cloth.
B.Shall be having alternate red and white colour strips.
C. The width of the strips shall be 1 ft.
D. Shall be provided with lining.
E. Shall be 6 ft. in length.
F. Shall be having one end of 2.2 ft. diameter with gradual reduction of diameter up to 1 ft. at
the other end.
G. The cloth shall be very strong to withstand high wind velocity,
H. The w/s shall be provided with Nylon rope of sufficient length for tying the socks with frame.
I. The w/s shall be provided with eyelets to tie it with frame.
42
-
-
... More
63mm Dia Jet Nozzle GunMetal
Hose Jet Nozzle 63mm dia gun metal confirming to IS-903
17
-
-
... More
"Fire Hose-63mm-15Mtr
Reinforced rubber lined(all synthetic jacketed,circular woven jacketed,EPDM synthetic reinforced rubber lined)non percolating fire fighting hose pipes with a specially formulated elastomer,resistant against grease,oils,acids,alkalis,heat,fungus,ozone and other chemicals with outer design to faciliate good grip with 63mm dia couplings -15 meter length,12g/Sq.cm working pressure,42Kg/Sq.cm Bursting Pressure and 25Kg/Sq.cm Proof Pressure conforming to IS636.88 type B with IS 903-1993 Gun Metal 63mm Coupling,with pair of male & Female Couplings of Instataneous pattern type coupling with copper wire binding-with all the test certificate for the hydrotesting of the Hose Pipes with binding with Guarantee of 12 months after Put in use Each hose shall be clearly and permanently marked with IS636-88 type B ,MMD,UL approval with size,manufactures name & Trade mark and month,year of the manufacturer" Trade mark and month,year of the manufacturer"
69
-
-
... More
CO2 Extinguisher- Aluminium Wheel Supply of Aluminium wheel required for opening & closing of CO2 Fire Extinguisher of approved make or advised by Officer Incharge Supply of Aluminium wheel required for opening & closing of CO2 Fire Extinguisher of approved make or advised by Officer Incharge
39
-
-
... More
Fire Extinguisher - Operational Sticker
Supply of Operational Stickers as & when required for the Co2/DCP/ABC Fire Extinguisher. Job shall include supply at destination, fixing the same whereever it is required. Billing shall be made based on the actual quantity
1320
-
-
... More
Fire Hydrant washer Supply of washer of hydranr couplings of 63mm Nozzle size of any approved make or advised by officer Incharge Supply of washer of hydranr couplings of 63mm Nozzle size of any approved make or advised by officer Incharge
98
-
-
... More
Wind Sock with Stand
WIND SOCK WITH STAND - WIND SOCK DOUBLE BALL BEARING ON CASTED
HOUSING EASILY UN BOLTED TO REPLACE WIND SOCKS STAND WITH 5
FEET LONG GI PIPE.
Wind Sock Double Ball Bearing on casted housing easily un bolted to replace wind socks Stand with 5 Feet Long GI Pipe.
Optional: 8inch Flange at Bottom, Powder Coated. 4 feet pipe GI 1⁄2"dia and 6feet GI 3⁄4"dia.
A) WIND INDICATOR STAND (WS-1): Newly designed casted full cover single ball bearing, 2’ diameter ring, and quick fit nuts & long GI pipe stand.
B) WIND INDICATOR DOUBLE (WS-2) Equally balanced casted full cover two ball bearing, 2’ diameter ring, quick fit nuts and 5’ long GI pipe.
C.) WIND INDICATOR CAGE (WS-C2) Cage gives support to cloth avoids easy tear out 5’ long stand & twin casted full cover bearing
Red and White color combination wind Sock made from nylon polyurethane coated.
One vertical joint make it almost seamless and 2 feet dia thick double coated first layer makes it stable makes it suitable for all stands.
Made from neither strong and durable nylon nor flex material with anticorrosive antiagening polyurethane coating to increase tear resistance. Made from deep dyed yarn no printing makes long color fastness Does not tear easily so always looks better. Reversible makes
4
-
-
... More
"Safety Helmet-Blue Colour
Helmet is provided with an adjustable chin strap for universal adjustment with Manual adjustment to suit most head sizes. Duly ISI Marked & DGMS Approved
24
-
-
... More
"Safety Helemt-Yellow Colour
Helmet is provided with an adjustable chin strap for universal adjustment withManual adjustment to suit most head sizes. Duly ISI Marked & DGMS Approved.
46
-
-
... More
"Safety Helemt-Red Colour
Helmet is provided with an adjustable chin strap for universal adjustment withManual adjustment to suit most head sizes. Duly ISI Marked & DGMS Approved.
5
-
-
... More
"Safety Helemt-White Colour
Helmet is provided with an adjustable chin strap for universal adjustment withManual adjustment to suit most head sizes. Duly ISI Marked & DGMS Approved.
28
-
-
... More
9 KGABC fire extinguisher Discharge Hose
Supply of Discharge Hose for 9 KG ABC fire extinguishers in accordance to the following specification's.
The hose length should be 750mm (with 12.5mm minimum ID)
101
-
-
... More
9 KGABC fire extinguisher bottom belt
Bottom Belt/ bottom ring for 9 KG ABC fire Extinguisher
MAterial - Plastic
101
-
-
... More
9 KGABC fire extinguisher control valve
Supply of control valve for 9 KG ABC fire extinguishers accordance to the following specification's.
The screw thred of the valve shall be in accordance with class "A" of IS2643 (PArt1):1975 or IS4218 (Part 3):1976 for a miniumum length of 16mm to suit the thread of the neck ring.
The Squeeze grip valve assembly with a spring loaded pressure sealed sliding spindle shall be provided in such a way that it is operated by manual depression by means of a cantilever pivoted grip lever. The spindle shall be so designed that the operation of the extinguishers can be regulated by means of depressing and releasing the extinguihser queeze grip handle. A safety pin/Seal Sahll be provided to prevent inadvertent operation by accident.
101
-
-
... More
9 KGABC fire extinguisher Pressure Gauge
Material:Stainless Steel
Pressure range: 0 to 28 bar / 0 to 400 PSI.
Operating Pressure - 11 to 18 bar / 195 PSI
A suitable pressure gauge shall be fitted to valve assembly or to the cylinder to know the amount of pressure inside the cylinder. The gauge dial shall indicate the operating pressure range of the extinguisher preferably with the colour code. The zero charging and maximum indicated pressure shall be shown in numerable and marked to ensure the correct charging of pressure.
101
-
-
... More
Water Cum Foam Monitor
"Water Cum Foam Monitor as per IS:8442 stand post type, Size:63mm, MOC: Carbon Steel, Inlet:4"" Flanged, Nozzle Type:Jet and Spray Type Hydro Foam Nozzle, M.O.C For Nozzles:GM TO IS 318 LTB-II /SS 3444 Gr.1, Pressure:100PSI, Flow Rate:1750LPM, Throw Rate water:53Mtrs, Throw Rate Foam:45Mtrs, Approval:BIS
4
-
-
... More
Fire Sand Bucket-9Kg
"Fire Sand Bucket-9Kg
Fire Buckets shall be as per the relevant Indian Standard, Size of the Fire Bucket shall be minimum nine ( 9 ) litres, The Fire Buckets shall be supplied empty, ""The material of construction shall be Galvanised Iron, ""The Fire Buckets shall be provided with anti corrosive treatment, The bottom of the buckets shall be hemispherical, The Fire Buckets shall be provided with handle for hanging at the top, There shall be another handle at the side / botton of the bucket. The handles shall help for holding while throwing the
content, ""The Fire Buckets shall be provided with anti corrosive treatment Painting, Outside of the Fire Bucket shall be painted with primer and Fire Red Colour. the word FIRE shall be written outside the bucket in bold black letters, The inside of the Fire Bucket shall be painted with primer and white" black letters.
42
-
-
... More
Trolley Wheel- Co2 6.5Kg Extinguisher
Supply of trolley wheel for Co2 6.5Kg Fire Extinguisher of any approved make or advised by Officer Incharge
23
-
-
... More
Inner Container-DCP 9/10Kg Extinguisher
Supply of Inner Container suitable to be used for DCP 9/10Kg Fire Extinguisher of any approved make or advised by Officer Incharge
15
-
-
... More
Dry Chemical Powder
Dry Chemical Powder for Fire Fighting Purpose having chemical composition of sodium based,shall be highly free flowing and siliconised to make powder water repellant and anto caking.The Powder shall be packed in rigidex imported materials bag with heavy duty LD Liners duly Hermeticaly sealed.The material for packing and sealings is to be made in such a way that if the packet is kept inside the bucket of water for 24Hrs., the characteristic of the powder shall remain unaffected against moisture.The Dry CHemical powder shall be conforming to IS 4308-1982 with all the latest amendments and bearing ISI mark powder shall be conforming to IS 4308-1982 with all the latest amendments and bearing ISI mark
660
-
-
... More
CO2 Extinguisher-Safety Pin
Supply of Safety Pin for CO2 Extinguisher of Capacity -2/3.2/4.5/6.5Kg suitable to be used of any approved make or advised by Officer Incharge Officer Incharge
97
-
-
... More
DCP Extinguisher-Safety Clip
Supply of Safety clip for DCP Fire Extinguisher suitable to be used for 10Kg Capacity Fire Extinguisher of any approved make or advised by Officer incharge advised by Officer incharge
94
-
-
... More
CO2Extinguisher- Squeezegrip- 4.5/6.5Kg
Supply of Nylon Squeeze grip suitable to be used for CO2 Fire Extinguisher of any approved make or advised by Officer Incharge Supply of Nylon Squeeze grip suitable to be used for CO2 Fire Extinguisher of any approved make or advised by Officer Incharge
96
-
-
... More
Handle for 2/2.5/3 Kg Co2 Extinguisher
Supply of Handle for 2/2.5/3 Kg Co2 Extinguisher suitable to be used for Co2 Fire Extinguisher of any approved make or advised by Officer Incharge
74
-
-
... More
DCP Extinguisher Squeeze grip-9/10Kg
Supply of Nylon Squeeze grip suitable to be used for DCP 9/10Kg Fire Extinguisher of any approved make or advised by Officer Incharge
104
-
-
... More
DCP Extinguisher Hose-10/9Kg
Supply of Hoses for Portable DCP Fire Extinguisher which shall be conforming to the specification in IS2171 and IS-10658. The hoses shall be designed to withstand the design pressure of the DCP cylinder
105
-
-
... More
DCP Extinguisher-Gun Metal cap
Supply of Gun Metal cap for DCP Extinguisher of capacity -10/9Kg suitable to used of any approved make or advised by officer Incharge Incharge
19
-
-
... More
DCP Extinguisher-Cap Washer
Supply of DCP Cap washer suitable to be used for DCP Fire Extinguisher of any approved make or advised by Officer Incharge Supply of DCP Cap washer suitable to be used for DCP Fire Extinguisher of any approved make or advised by Officer Incharge
74
-
-
... More
CO2 ExtinguisherDischar ge Horn-4.5/6.5Kg
Supply of Discharge Horn of required size of any approved make or advised by Officer IN charge which is suitable for using at CO2 Fire Extinguisher of capacity 4.5/6.5Kg
91
-
-
... More
CO2 Extinguisher Hose-4.5/6.5Kg
Supply of Hoses for Portable CO2 extinguisher shall be braided rubber hose having a minimum bursting pressure of 275Kg/Cm2 in controlled discharge & 140Kg/Cm2 in uncontrolled discharge system
91
-
-
... More
CO2ExtinguisherDisc hargeHorn-2/2.5/3 Kg
Supply of Discharge Horn of required size of any approved make or advised by Officer IN charge which is suitable for using at CO2 Fire Extinguisher of capacity 2/2.5/3 Kg
56
-
-
... More
CO2 Extinguisher Bend Pipe-2/3.2Kg
Supply of Bend Pipe of required size of any approved make or advised by officer Incharge which is suitable for using at CO2 Fire Extinguisher of capacity-2/3.2Kg.
56
-
-
... More
Oil Absorbent Pads 38 X 46cm (100 Nos/Pack),
Absorbing Capacity: 1.3Ltrs/Pad, Colour: white, Base Fiber: Polypropylene
Relevant test certificate to be submitted test certificate to be submitted"
12
-
-
... More
Oil Absorbent Boom 5" X 10Feet (4 Nos/Pack), Absorbing Capacity: 30 Lts/Boom, Colour: White, Type: Single Skin, Relevant test certificate to be submitted certificate to be submitted"
12
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%