Nuclear Power Corporation Of India Limited Tender
... More
The NPCIL has issued a formal invitation for competitive bids for the Nuclear Power Corporation Of India Limited project, for Construction Of Fencing And Allied Works in Uttara Kannada, Karnataka, with an estimated contract value of Rs. 6,94,81,161. The bid opening date for this tender is 27-01-2025 and the last date for bid submission is 18-02-2025. Interested bidders for Nuclear Power Corporation Of India Limited tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Nuclear Power Corporation Of India Limited - NPCIL Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date27 Jan 2025
Closing Date18 Feb 2025
Tender Amount₹ 6,94,81,161
Costs
EMD
₹ 13,89,623Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Construction Of Fencing And Allied Works
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_NPCIL_224925_1Bid Award Id
ViewTender No
CPPP/2024/061Tender Authority
Nuclear Power Corporation Of India Limited ViewPurchaser Address
-Website
http://etenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing & installing 600 mm dia GI punched tape Concertina Coil (10m open-able length) up to 3.2 meter height over Y shape posts & incl. 9 Nos. of 4mm dia. horizontal RBT barbed wire , stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron and tying with suitable gauge GI wire [ J clips & GI wire shall be of suitable gauge, of standard make], at regular interval by maintaining the proper & required pitch distance at all location & at all lifts/heights. etc. all complete as per specifications and as directed by the Engineer-in-charge Note: Structural steel works shall be paid Separately as per the relevant item
6000
-
-
... More
Carrying out Dismantling/ Demolition carefully the existing plastered Brick /block masonry in cement mortar at all elevations by manual or mechanical means including all necessary equipments such as drilling machine, chiselling etc., necessary manpower and disposing off unwanted material to appropriate disposing area within 2 Km and spreading the debris at all locations etc. all complete as per specifications and as directed by engineer-in-charge
25
-
-
... More
Construction of Granular Sub-Base of grading V as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method at OMC and compacting with vibratory roller to achieve the desired density, complete as per MoRTH specifications 401 and as directed by Engineer-in-charge
1200
-
-
... More
Providing and fixing minimum 3 mm dia. [to achieve outer dia of at least 4 mm] thick PVC Coated [of standard make and of colour / shade - as per site requirement & as selected by engineer-in-charge] Chain-link fabric fence and of mesh opening 50 X 50 mm including reinforcing with GI wires [of 1st quality & of standard make] of 8 gauge at top, middle and bottom [total 3 rows], fixing chain link mesh to the existing RCC / GI / MS Pipes / fencing posts & fencing struts using MS flats [ 6 mm. thick] and 8 mm. dia and 110 mm. long self threading screws [GI] with rounded head at all locations & at all lifts / heights etc. all complete as per specifications and as directed by the Engineer-in-charge Note: MS flats 6 mm. thick will be measured & paid as per relevant item
18000
-
-
... More
Providing and laying not less than 150 mm thick Stone Soling below floor & foundations bed etc. using hard, durable & approved quality stones, rubbles including filling Interstices using small size stones, stone chips, murum & watering [to fill up all gaps] etc. preparation of base properly, levelling, dressing & compaction at all locations etc. all complete as per specifications, drawing [if any] and as directed by engineer-in-charge
50
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
1500
-
-
... More
Plain cement concrete 1:4:8 (1Cement : 4 Fine aggregates : 8 Coarse aggregates 40 mm. nominal size)
202
-
-
... More
Filling with available excavated soil in layers not exceeding 200 mm. thick including compaction of each deposited layer using hand / steel rammer with proper watering up to lift of 1.50 meters etc. all complete as per specifications and as directed by Engineer-in-charge
3000
-
-
... More
Girth from 300 mm to 600 mm
200
-
-
... More
Carrying out Dismantling/ Demolition carefully the existing RCC structural elements at all elevations by manual or mechanical means including all necessary equipments such as drilling machine, cutting machine, gas cutter etc. necessary manpower and including collecting & stacking neatly all serviceable materials at NPCIL site store/as directed by EIC and disposing off unwanted material to appropriate disposing area within 2 Km at all locations and at all lifts & heights etc. all complete as per specifications and as directed by engineer-in-charge
41
-
-
... More
upto 3 m depth
2002
-
-
... More
Providing and laying RCC of grade 1:1.5:3 using 20 mm & downsize clean, crushed, well graded, aggregates of hard, durable & approved quality for foundation, rafts, footings, plinth, columns, beams, Chajjas, Lintels, bedding, platform, pathways, walk ways and all miscellaneous in-situ concrete works etc. including preparation of base by close hacking / chipping the concrete & plastered surfaces, mechanical mixing, transporting, laying, spreading, compacting, levelling, finishing & curing at all locations & lifts / heights etc. all complete as per specifications and as directed by Engineer-in-charge Note: 1) Reinforcement shall be paid shall be paid as per the relevant item.
2)Rates shall be including the cost of Formwork, staging and all other concreting forming accessories/consumable required.
650
-
-
... More
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted as per MoRTH specifications 305 and as directed by Engineer-in-charge
3000
-
-
... More
Providing, Fabricating & erection of miscellaneous structural steel work for Tubular sections, bolts, nuts, flats, plates, purlins, rafters, horizontal / vertical / cross members, columns, beams, trusses, plate EPs, windows & doors frames & shutters, grills, gates etc. and all other miscellaneous fabrication works including providing standard MS Steel Sections conforming to Indian standards which are required for executing this work and fixing / erecting with site welding the same in position to true line, level & plumb including providing & fixing hilti bolts [of 1st quality ] of suitable dia. & length [wherever required], preparation of base, providing & painting One Coat of approved Primer of 1st quality & of standard make at all locations & lifts /heights etc. all complete as per specifications and as directed by Engineer-in-charge.
70
-
-
... More
Providing and fixing RCC precast fencing pole of standard size including RCC Y arm of standard size for a maximum height of (10+2) feet + necessary embedment in PCC/RCC pedestal with minimum thickness of 6 inches at vertical portion and casted in M 20 with 20mm down size aggregates using steel moulding , curing , transportation to work spot including excavation in all types of soil, fixing in PCC/RCC including aligning to plumb and line including cost of all materials, labour,usage charges of machinery at all locations & at all lifts / heights etc. all complete as per specifications and as directed by the Engineer-in-charge
500
-
-
... More
depth Beyond 3 m and up to 6 m
1000
-
-
... More
Providing and laying Steel Reinforcement of grade Fe-500 / Fe-500 D HYSD bars of all diameters as per IS:1786 [latest edition] of brand approved by EIC including removing loose scales, cutting, bending, transporting, placing in position & binding with suitable gauge soft annealed binding wire for all in-situ concrete works and all other miscellaneous RCC works, providing & placing spacer bars, cover blocks at all locations & lifts /heights etc. all complete as per specifications and as directed by Engineer-in-charge
50
-
-
... More
Carrying out cutting and cleaning of grown wild vegetation, bushes, grass, small plants less than 300 mm girth and all other unwanted wild growth/creepers, etc. including disposal of cut bushes out side the premises etc. all complete as per specifications and as directed by Engineer-in-charge
40002
-
-
... More
Providing and laying External Cement Plaster (New or Old repair / patch / rectification works) 18 mm thick in Two Coats. Base coat shall be 12 mm thick in CM 1:5 & finishing coat shall be 6 mm thick in CM 1:3 (sponge finished) rubbed perfectly so as to obtain smooth & even finish including curing; including providing and fixing with all necessary consumables fixtures chicken wire or fibre mesh over the junction/interface of different material surface such as RCC/Masonry wherever required; including preparation of base by close hacking / chipping the concrete / plastered surfaces & cleaning at all locations & lifts / heights etc. all complete as per specifications and as directed by Engineer-in-charge.
3000
-
-
... More
Providing and laying Plain Cement Concrete of specified grade for foundations, plinth, bedding, platform, pathways & all other miscellaneous PCC works including mixing, transporting, laying, spreading, compacting, levelling, finishing, curing, formwork etc. including cleaning of founding strata for any unwanted material, rubbish etc. all complete as per specifications and as directed by Engineer-in-charge Note: Rates shall be including the cost of Formwork, staging and all other concreting forming accessories/consumable required.
-
-
-
... More
Girth from 900 mm to 1800 mm
150
-
-
... More
Plain cement concrete 1:3:6 (1Cement : 3 Fine aggregates : 6 Coarse aggregates 20 mm. nominal size)
300
-
-
... More
Girth from 600 mm to 900 mm
200
-
-
... More
Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots/stump and stacking of serviceable material and disposal of unserviceable material at all locations.all complete as per specifications and as directed by Engineer-in-charge
-
-
-
... More
Girth above 1800 mm
150
-
-
... More
Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete as per MoRTH specifications 406 and as directed by Engineer-in-charge
951
-
-
... More
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. at all lead & lifts/heights and stacking the serviceable materials at NPCIL site store/as directed by EIC. all complete as per specifications and as directed by engineer-in-charge..
10000
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
1500
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements