Minor Irrigation Department Tender

code01 - Cutting and burning or disposing off Apu / Jondu from marshy areas as directed with all other ancillary operations complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code07 - Earth work in surface excavation by mechanical means for lowering & leveling the ground without blasting for all works other than foundation in Ordinary/Soft rock & depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In Ordinary/Soft rock upto 300 mm depth.complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code06 - Removing disturbed rough/ size stone revetment 300mm thick with 150mm thick 40mm down aggregate backing and resetting the same using available stones and aggregate including packing, wedging, finishing etc., complete with all lead upto 50m and all lifts.complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code08 - Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code16 - Providing and constructing uncoursed rubble stone masonry in CM 1:5 proportion by volume for canal side lining using stones and stone chips including cost of all materials, machinery, labour, batching and mixing mortar, packing mortar into joints, wedging stone chips, foming weep holes at specified interval, finishing, curing and all other ancillary operations complete. From approved quarry.complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code12 - Cutting and removing jauliflora bushes upto 1.50 m girth excluding removal of stumps and including burning or disposing off the materials as directed with all other ancillary operations complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code04 - Providing casing embankment using semi-pervious / pervious soil collected in embankment area in heaps as part of disposal of excavated soil from canal in layer of 250 to 300 mm before compaction including cost of all materials,machinery, labour,all other operations such as spreading soil in layer of specified thickness, sorting-out, breaking clods, levelling, sectioning edges / sides, watering, compacting each layer to density control of not less than 95 percent or as stipulated by power roller and all other ancillary operations complete.complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code10 - De-silting of Feeder Channel/Canal in dry condition by excavating the deposited bed material and disposing off the same by stacking/ formation of Embankment or as directed including cost of all machinery, labour & all necessary works as directed and complete as per specification.complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code05 - Providing casing embankment using semi-pervious / pervious approved soil from borrow areas in layers of 250 to 300 mm ( before compaction ) including cost of all materials, machinery, labour, all other operations such as collection of soil, spreading soil in layer of specified thickness, sorting out, breaking clods, levelling, sectioning edges / sides, watering, compacting each layer to density control of not less than 95 percent or as stipulated using power roller and all other ancillary operations complete.complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code03 - Excavating grip trenches of specified size in all kinds of soil in existing bund for abutting fresh embankment to strengthen the existing bund including disposing off the excavated soil in in specified dump area and all necessary works as directed and complete as per specification complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code13 - De-silting of Feeder Channel/Canal in dry condition by excavating the deposited bed material and loading the same to transport vehicle ( excluding cost of transportation ) including cost of all machinery, labour & all necessary works as directed and complete as per specification.complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code09 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

code02 - Cutting and removing jauliflora bushes upto 1.50 m girth excluding removal of stumps and including burning or disposing off the materials as directed with all other ancillary operations complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.