Minor Irrigation Department Tender

min21 - Supply, installing, testing and commissioning COMMON control panel consisting of the following INCOMING: 1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. Direct Online Starter (DOL) of Star-delta (SD) Starter suitable for 6 to 15 HP pumps 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 No. for outdoor type etc. complete with all lead and lift as per the direction of Engineer in charge.

min08 - Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lift as per the direction of Engineer in charge.

min07 - Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments etc. complete with all lead and lift as per the direction of Engineer in charge.

min13 - Providing, laying and fixing of 50 mm dia heavy duty GI pipes conforming to IS 1239: 1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning (contractor will make his own arrangements for procuring water for testing) etc. complete with all lead and lift as per the direction of Engineer in charge.

min20 - Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/25/40 Amps with scalable box etc. complete with all lead and lift as per the direction of Engineer in charge.

min02 - Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete) for a depth from 0 to 50 mtr etc.complete with all lead and lift as per the direction of Engineer in charge.

min22 - Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipments including providing cement concrete foundation bed etc., complete as per specification, with testing etc. complete with all lead and lift as per the direction of Engineer in charge.

min15 - Supply and delivery at site wrought middle steel (galvanized) 50 mm dia GI bend confirming to IS 1239-II, 1991 with latest amendments if any etc. complete with all lead and lift as per the direction of Engineer in charge.

min04 - Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete) for a depth from 100 to 150 Mtrs etc.complete with all lead and lift as per the direction of Engineer in charge.

min19 - Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at the location of respective pump setsetc. complete with all lead and lift as per the direction of Engineer in charge.

min18 - Supply and delivery at site of brand new best make 63 mm pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments etc. complete with all lead and lift as per the direction of Engineer in charge.

min26 - Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia.etc. complete with all lead and lift as per the direction of Engineer in charge.

min03 - Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete) for a depth from 50 to 100 Mtrsetc.complete with all lead and lift as per the direction of Engineer in charge.

min16 - Supply and delivery at site special moulded variety 50 mm dia PVC reducer as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments etc.complete with all lead and lift as per the direction of Engineer in charge.

min17 - Supply and delivery at site of brand new best make 50 mm non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments etc. complete with all lead and lift as per the direction of Engineer in charge.

min25 - Providing main connection from pole PVC insulated sheathed steel wire cable in GI pipe as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit. etc. complete with all lead and lift as per the direction of Engineer in charge.

min06 - Providing and installing at site of work 160 mm dia (weight of pipe-2.753 kg) 4 Kg/m2 PVC pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete with all lead and lift as per the direction of Engineer in charge.

min09 - Providing 7.50 HP-120 LPM @ 132 m=14 STG Outlet Dia-2.00" submersible pump set of 150mm dia suitable for bore well and confirming to IS 8034-2000; 3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary ammendments and instructions etc. complete with all lead and lift as per the direction of Engineer in charge.

min12 - Supply and delivery at site stringing of heavy duty Nylone/ PP rope with ISI etc complete suitable for Single phase Pumpsets etc. complete with all lead and lift as per the direction of Engineer in charge.

min14 - Supply and delivery at site 50 mm dia wrought middle steel (galvanized) GI union confirming to IS 1239-II, 1991 with latest amendments if any etc. complete with all lead and lift as per the direction of Engineer in charge.

min05 - Providing and installing at site of work 160 mm dia (weight of pipe-3.923 kg) 8 Kg/m² P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete with all lead and lift as per the direction of Engineer in charge.

min01 - Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers's method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc.complete with all lead and lift as per the direction of Engineer in charge.

min11 - Providing, laying and jointing 63 mm dia pipes of HDPE grade PE80 PN12.5 of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete (Note: Upto 110mm dia Coil shall be used) etc. complete with all lead and lift as per the direction of Engineer in charge.