Minor Irrigation Department Tender

Fifteen - Providing and fixing tarfelt expansion joint filler board for cement concrete lining of canal including cost of all materials, labour and all other ancillary operations etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

Forteen - Providing and constructing 75 mm dia PVC pipe weep holes for concrete / masonry walls including providing200 x 200 x 200 mm size porous concrete block made of cement and 20 mm down coarse aggregate in 1 : 4 proportion including 100 mm thick sand backing at the junction of wall and soil back fill, cost of all materials, machinery, labour & all necessary works as directed and etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

Eight - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/ welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Para 4.8 to 4.8.1 to Sec II C 3.1 to 3.4 of detailed Specification)

Three - Providing casing embankment using approved semi-pervious soil borrow areas in layers of 250 to 300 mm (before compaction) including cost of all materials, machinery, labour, all other operations such as collection of soil, spreading soil in layer of specified thickness, sorting out, breaking clods, levelling, sectioning edges / sides, watering, compacting to density control of not less than 95 percent using power roller etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref :Para 3.2 to 4.3.1 & Para 2.4.1 to 2.4.2 of detailed Specification)

Twelve - Filling clayey soil between two rows of sand bags placed for forming ring bund including tamping, plugging leakage points etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

Seven - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges . The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

Sixteen - Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

Four - Providing and laying in-situ vibrated M-20 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for RCC works of gallery, sluice, spillway crest, spillway d / s face, energy dissipating structures, training walls, piers, abutments and such other locations including cost of all materials, machinery, labour, cleaning, batching, mixing, placing in position, levelling,vibrating, finishing, curing with all other ancillary operations etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification)

Thirteen - Providing and constructing 450 mm thick hand packed rough stone revetment consisting of 300 mm thick rough stones with 400 to 450 mm long through stones at 1.5 m c / c over a backing of 150 mm thick 40 mm down graded coarse aggregate layer including cost of all materials, machinery, labour, laying to specified slope, wedging with chips, finishing etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

Six - Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

Two - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in aradius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Para 3.1 to 3.1.11 and 1.1 to 1.17.1 of detailed Specification)In ordinary / soft rock without blasting upto 1.5m depth

Nine - Providing ,Supplying and fixing M.S. gates of Suitable size with required number of M.S. plate , stiffners, and horizontal bracing of ISMC 75*40 including rubber guard of ISA 20*4 of approved quality to bottom & two sides and to be fixed to the grove of M.S. gate of size 25 mm with machine screw nuts and bolts of size 6mm dia & 35mm long and fixed with 16mm dia MS bar handles with required numbers suitably welded to horizontal bracing including two coats of anticorrosive bituminous paint over a coat of primer & all necessary works as directed and complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Relevant IS & Para 4.1 & 4.2 of detailed Specification)

Eleven - Providing and placing sand bags consisting of empty cement bags filled with 35 to 40 kg locally available sand for forming ring bund including plugging the joints with selected earth, cost of all labour, materials etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)