Minor Irrigation Department Tender

Twelve - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

One - Cutting and burning or disposing off Apu / Jondu from marshy areas as directed with all other ancillary operations etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge.(Ref : Para 1.1 & tech Spn 1.4.1 of detailed Specification)

Sixteen - Providing and placing sand bags consisting of empty cement bags filled with 35 to 40 kg locally available sand for forming ring bund including plugging the joints with selected earth, cost of all labour, materials etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

Five - Earth work excavation for Foundation by mechanical means for all works as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Para 3.1 to 3.1.11 and 1.1 to 1.17.1 of detailed Specification) In ordinary/soft rock without blasting

Thirteen - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Para 4.8 to 4.8.1 to Sec II C 3.1 to 3.4 of detailed Specification) Super structure of Bridges

Three - Cutting and removing jauliflora bushes above 1.50 m upto 3.00 m girth excluding removal of stumps and including burning or disposing off the materials as directed with all other ancillary operations etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge.(Ref : Para 1.1 & tech Spn 1.4.1 of detailed Specification)

Four - Earth work excavation for Foundation by mechanical means for all works as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Para 3.1 to 3.1.11 and 1.1 to 1.17.1 of detailed Specification) In all kinds of soils

Eighteen - Providing and constructing 450 mm thick hand packed rough stone revetment consisting of 300 mm thick rough stones with 400 to 450 mm long through stones at 1.5 m c / c over a backing of 150 mm thick 40 mm down graded coarse aggregate layer including cost of all materials, machinery, labour, laying to specified slope, wedging with chips, finishing etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Para 4.3 to 4.3.1 and Sec II C3.4 (i) of detailed Specification)

Nine - Providing and laying in-situ vibrated M-20 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for RCC works of gallery, sluice, spillway crest, spillway d / s face, energy dissipating structures, training walls, piers, abutments and such other locations including cost of all materials, machinery, labour, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing with all other ancillary operations complete etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification)

Fifteen - Providing, Supplying and fixing M.S. gates of size with 6mm thick M.S. plate with and stiffeners (2 Nos) horizontal bracing 6 Nos. of ISMC 75*40 including providing rubber guard of ISA 20*4 for providing rubber of approved Quality for bottom & two sides fixed to grove of M.S. gate of size 25 mm . 25mm with machine screw nuts and bolts of size 6mm dia & 35mm long and providing 16mm dia MS bar handles (4 Nos) suitably welded to horizontal bracing including two coats of anticorrosive bituminous paint over a cost of primer complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Relevant IS & Para 4.1 & 4.2 of detailed Specification)

Twenty - Providing and fixing 20 mm thick 150 mm depth tarfelt expansion 3.43. joint filler board for cement concrete lining of canal including cost of all materials, labour etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

Nineteen - Providing and constructing 75 mm dia PVC pipe weep holes for concrete / masonry walls including providing 200 x 200 x 200 mm size porous concrete block made of cement and 20 mm down coarse aggregate in 1 : 4 proportion including 100 mm thick sand backing at the junction of wall and soil back fill, cost of all materials, machinery, labour etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

Fourteen - Providing and fixing M.S. Channel frame to suite the suitable size of gates. The side channels with suitable height with hold fasts 12mm dia and 0.5m long M.S. Bar at 0.50 m c/c with suitable size bottom channel including cost of all materials including two coats of anti corrosive paint over a coat of primer etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Relevant IS & Para 4.1 & 4.2 of detailed Specification)

Six - Preparing foundation bed for masonry or concrete in rock portion by removing all loose material by wedging / chiselling and disposing off the same as directed and cleaning the surface with air and water jet including cost of all materials, machinery, labour and all other ancillary operations (Organisation specific) etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification)

Twenty one - Providing and fixing board displaying information, such as name of work, Tender cost, Name of contractor , work completion and liability period etc , having rectangular shape of 1.20m x 0.90m size made out 18 gauge ( 1.25mm ) thick mild steel sheet painted with one coat of Zinc chromate staving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc With approved colour shade paint complete, on M.S angle of size 35 x 35 x 3 mm frame with properly cross braced M.S angle of size 35mmx35mmx3mm duly painted including two M.S . angle iron posts of size 65 mm x 65 mm x 6 mm. 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc. and fixing the board in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation labour Spec . No As directed by engineer in charge & MoRTH specification 804 etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

Seven - Providing and fixing 25 mm dia 3 m long cold twisted defomed steel dowel bars with one end driven into 38 mm dia 1.50 m deep hole drilled in bed rock and other end provided with L- bend for embedding in concrete / masonry of over flow / non-over flow blocks and other appurtenant works including cost of all materials, machinery, labour, drilling and cleaning hole, filling hole with thick cement slurry, driving anchor rod and all other ancillary operations etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Para 6.3 to 6.4 of detailed Specification)

Two - Cutting and removing jauliflora bushes upto 1.50 m girth excluding removal of stumps and including burning or disposing off the materials as directed with all other ancillary operations etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge.(Ref : Para 1.1 & tech Spn 1.4.1 of detailed Specification)

Seventeen - Filling clayey soil between two rows of sand bags placed for forming ring bund including tamping, plugging leakage points etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)