Ministry Of Road Transport And Highways Tender

80x60 cms Rectangular

Filling Pot-holes and Patch Repairs with Bituminous concrete, 40mm thick: Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 509, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2, including cost of all materials, labour, hire charges of machinery, lead, lift , loading, unloading stacking, transporting etc., complete including lead for Bitumen & Emulsion.Using Grading-II Material etc., Complete. As directed by Engineer incharge of the work.

Providing and fixing RCC precast guard stones of size 0.23mx0.23mx1.5m casted in cc 1:1.5:3 with 20mm down size aggregates using 10mm dia vertical 4TMT steel rods and 8 mm dia stirrups at 20 em c/c fixed 0.90 m above Ground level using steel moulding, Curing, transportation to work spot including excavation in hard soil fixing in plain cement concrete 1:2:4 using 20mm downsize aggregate including aligning to plumb and line providing enamel painting to exposed faces in alternate black and white strips and painting with reflective paint on top of guard stone with a width of 10 em including cost of all materials, labour, hire charge of machineries complete. (As per drawing) etc., complete. As directed by Engineer incharge of the work.

Metal Beam Crash Barrier Type - A, “W” : Providing, erecting and fixing “W” metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete including cost of all materials, labour, loading, unloading, lead, lift, transporting etc., complete. As directed by Engineer incharge of the work.

90cm eqi triangle

Providing and applying Tack Coat as per Table 500-5 on prepared surface using Rapid setting Bituminous (RS-1) emulsion complying with IS 8887 of approved quality and make including cleaning of road surface by Mechanical Broom & dusting by Air compressor, and spraying by Bitumen Pressure Distributor, including cost of all materials, labour, hire charges of machinery, loading, unloading stacking, etc complete, including lead for Emulsion. Using Rapid setting Bituminous (RS-1) emulsion On bituminous surfaces at 2.0kg/10 sqm etc., complete. As directed by Engineer incharge of the work.

90x30 cm Rectangular Hazard

Bitumionus Concrete: Providing and laying Bituminous Concrete using crushed stone aggregates as per table 500-16, 17 of specified graded aggregates and filler (Stone dust/Cement) @ 2% by weight of aggregates premixed with bituminous binder in Batch/Hot mix plant, loading of aggregates with F.E. loader, transported to site in tipper to paver, laid over a previously prepared surface with paver finisher to the required grade, level, alignment, rolling with Smooth wheeled roller 8-10 tonnes, vibratory roller 8 tonnes, smooth wheeled tandem roller 6-8 tonnes as per clauses 501.6 and 501.7 to achieve the desired compaction, including cost of all materials, labour, hire charges of machinery, lead, lifts, loading, unloading, stacking, transporting etc complete, including lead for Bitumen and with a lead of mixed material, excluding cost of primer/tack coat. (Compacted thickness) Using 80- 100 TPH Batch mix plant with Paver Finisher Hydrostatic with sensor control (ii) Grading 2 with 5.40% Bitumen (30 - 40 mm compacted thickness) (a) Using 60/70 Grade (VG-30) Bitumen] . As directed by Engineer incharge of the work.

Maintenance of Earthen Shoulder (filling with fresh soil): Making up loss of material / irregularities on shoulder to the design level by adding fresh approved soil upto 150mm excavated by excavator, carriage by tipper and compacting it with plate compactor to the desired field density including cost of all materials, labour, hire charges of machinery, loading, unloading, lead & lift etc., complete. As directed by Engineer incharge of the work.

Removal of unservicable soil:-Removal of unservicable soil with hydraullic excavator 0.9 cum bucket capacity including excavation, loading in tippers, unloading, all lifts, disposal upto 1000 metres including all labour, hire charges of all machineries etc complete., As directed by Engineer incharge of the work.

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shurbs, saplings and trees upto girth 300mm, removal of stumps of trees cut earlier and disposal of unservicable materials and stacking of servicable materials to be used or auctioned, lead, including removal and disposal of top organic soil not exceeding 150mm in thickness including all labour, hire charges of all machineries etc... complete. By mechanical means in area of light jungle.etc., Complete. As directed by Engineer incharge of the work.