Ministry Of Road Transport And Highways Tender

Painting the road surface using approved quality Thermo Plastic material (homogneiously composed of aggregates, pigment, resings and glass reflcetorising beeds) confirming to Clause-803.4.2.2 applied hot either by screeding or extension process at the rate of mentiones area of painted surface using suitable machine capable of controlled preparation and laying with surface applicator of glass beads at 250gms/sqmtr allowing cooling to ambient pavement temperatutre, that shall produce an adherent pavement marking of minimum specified thickness of 2.5mm including barricading for traffic diversion as per IRC:35 cleaning the surface of dirt, dust and other foreign matter, demarcation at site, barricading for traffic diversion, traffic control including cost of all materials, labour, loading, unloading, lead, lift, transporting 5.50 kg per Sqm 2.5mm Thick (Edge line & Center Line) etc., complete. by Mechanical means in area of light jungle. as per the direction of the Engineer In Charge of the work.

Painting the road surface using approved quality Thermo Plastic material (homogneiously composed of aggregates, pigment, resings and glass reflcetorising beeds) confirming to Clause-803.4.2.2 applied hot either by screeding or extension process at the rate of mentiones area of painted surface using suitable machine capable of controlled preparation and laying with surface applicator of glass beads at 250gms/sqmtr allowing cooling to ambient pavement temperatutre, that shall produce an adherent pavement marking of minimum specified thickness of 2.5mm including barricading for traffic diversion as per IRC:35 cleaning the surface of dirt, dust and other foreign matter, demarcation at site, barricading for traffic diversion, traffic control including cost of all materials, labour, loading, unloading, lead, lift, transporting 16.50 kg per Sqm 7.5mm Thick (Transverse Bar ) etc., complete. by Mechanical means in area of light jungle. as per the direction of the Engineer In Charge of the work.

Road Studs with Lense Reflector Providing and fixing of Reflective Raised Pavement marker (RPM’s) / Cat eyes / Road studs confirming to ASTM D4280 type - H, having reflective panels made of prismatic lens of total with a height of 20mm, size of 130mm X 105mm and reflecting area of 13 Sqcm with the slope of retro reflective surface The RPM’s should be fixed by using two numbers of polymetric shanks using appropriate adhesive as recommended and certified by the RPM manufacturer. The raised pavement marker should support a sufficient minimum load of 13635 Kg in accordance with ministry specification. The test certificates of the product and purchase lots certificate issued by the supplier should be producted at the time of billing. The RPM's should be got approved by the Engineer in charge of work before fixing at site.The cost is inclusive of all lead lift, transportation, labour, fixing in position firmly, as per directions and instructions of the Engineer in charge of work. reflectivity warrenty as per IRC : 67-2012 etc., complete by Mechanical means in area of light jungle. as per the direction of the Engineer In Charge of the work.