Mangalore Electricity Supply Company Limited Tender

code02 - Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing)Heavy Duty GI pipe of 65mm dia ---- Valid PWD Class 1 licenseESI Registration CertificatEPF Registration CertificateValid Work done Certificate with indent Number(In last 5 Year)GST RegistrationPAN CardLast 5 Years Valid Turnover Certificates

code06 - Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Gutter (600 mm over all girth(500 - 600mm).. ---- Valid PWD Class 1 licenseESI Registration CertificatEPF Registration CertificateValid Work done Certificate with indent Number(In last 5 Year)GST RegistrationPAN CardLast 5 Years Valid Turnover Certificates

code04 - Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.. ---- Valid PWD Class 1 licenseESI Registration CertificatEPF Registration CertificateValid Work done Certificate with indent Number(In last 5 Year)GST RegistrationPAN CardLast 5 Years Valid Turnover Certificates

code08 - Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Valid PWD Class 1 licenseESI Registration CertificatEPF Registration CertificateValid Work done Certificate with indent Number(In last 5 Year)GST RegistrationPAN CardLast 5 Years Valid Turnover Certificates

code03 - Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- Valid PWD Class 1 licenseESI Registration CertificatEPF Registration CertificateValid Work done Certificate with indent Number(In last 5 Year)GST RegistrationPAN CardLast 5 Years Valid Turnover Certificates