Krishna Bhagya Jala Nigam Limited Tender

code04 - Providing Heavy mazdoor having sufficient experience to assist ITI electricians to work in shift duties including Sunday and all days

code05 - Providing heavy mazdoor having sufficient experience to Valve Operator for regulating water to work in shift duties including Sunday and all days,

code06 - Providing house keepers having sufficient experience in house keeping, to work in general shift including Sunday and all days

code07 - Providing security guards for necessary watch and ward of pump house, sub station, to work in shift duties including Sunday and all days,

code08 - Providing and fixing of Single/ Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/ 50. All internal parts such as float, shell with appurtenances., all cover bolts of austenitic alloy / SS 304 steel, DN 50 float of HOSTAFLON / SS 304 and gaskers and seals of EPDM. Epoxy powder coating (EP-P) inside and utside colour blue RAL5005. The valves should be designed for all the three functions i.e., 1. Large orifice for venting of large air volumes on start up. 2. Large orifice for intake of large air volumes. 3. Small orifice for discharge of pressurized air during operation for PN 10.00 Etc., Complete as per direction of Engineer incharge (For TP Air Valves of Dia 50 MM)

code09 - Providing and fixing of Single/ Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/ 50. All internal parts such as float, shell with appurtenances., all cover bolts of austenitic alloy / SS 304 steel, DN 50 float of HOSTAFLON / SS 304 and gaskers and seals of EPDM. Epoxy powder coating (EP-P) inside and utside colour blue RAL5005. The valves should be designed for all the three functions i.e., 1. Large orifice for venting of large air volumes on start up. 2. Large orifice for intake of large air volumes. 3. Small orifice for discharge of pressurized air during operation for PN 10.00 Etc., Complete as per direction of Engineer incharge (For TP Air Valves of Dia 200 MM)

code10 - Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 100% leak proof with face to face dimensions as per IS 14846-2000 with the latest amendments only. The stem sealing should be with toroidal sealing rings (minimum 2 " O " rings). Body and bonnet should be coated with Electrostatically applied Epoxy Powder Coating with minimum coating thickness of 250 micron both inside and outside. The rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc. but excluding earth work. For PN-10: (Note: TP set should be considered only for DI pipes estimate. For MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR rates of valves and provision for corresponding dia MS flanges should be made in the estimate.) etc. complete (Sluice Valves of Dia 50 MM)

code11 - Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 100% leak proof with face to face dimensions as per IS 14846-2000 with the latest amendments only. The stem sealing should be with toroidal sealing rings (minimum 2 " O " rings). Body and bonnet should be coated with Electrostatically applied Epoxy Powder Coating with minimum coating thickness of 250 micron both inside and outside. The rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc. but excluding earth work. For PN-10: (Note: TP set should be considered only for DI pipes estimate. For MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR rates of valves and provision for corresponding dia MS flanges should be made in the estimate.) etc. complete (Sluice Valves of Dia 200 MM)

code12 - Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata. (All kinds of soils. Depth upto 1.50 m )

code13 - Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. omplete. NOTE: Upto 110mm dia Coil shall be used. For HDPE PE 80 PN 10.0 (160 mm Dia)

code14 - Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications

code15 - Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments (Size 80 mm)

code16 - Providing and fixing of Double Flanged Resilient seated short body Butterfly valves of various dis. As per IS 13095/en 593 with integral DI seat face with approved soft sealing with body and disc of Ductile Iron (DI) of grade GGG-40/50, Body seat & Seal retaining ring of SS 304/CF8, Shaft of stainless steel AISI 410/420/431, Bronze shaft bearing, periferal disk, seal end "o" rings of EPDM, double eccentric disk. Body and disk should be coated with electrostatcially applied epoxy powder coating with a coating thickness of 250 micron both inside and out side. The rate is inclusive of cost of valve, TP set, galvanised bolts and nuts and rubber insertions. For PN 10.0 (All the drilled holes in the body shall be of through holes, no tapped holes will be allowed.) (Note: TP set should be considered only for DI pipes estimate. For MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR rates of valves and provision for corresponding dia MS flanges should be made in the estimate.) etc. complete (For Valve of PN 10.0 and 1000mm)

code17 - Providing, fabricaing and fixing at site various diameters of MS Flanges as per IS standards to fix sluice valves as per sketch. The rate to include cost of all materials, labour, consumables, hire charges for tools and tackles, weldiing equipments etc. complete as per instructions of the Engineer in charge for: (Flanges of 1000mm dia and 32mm thick.)

code18 - Manufacturing, providing, trasporting, rolling, lowering, laying, jointing and commissioning of ERW (Electric Resistance Welded)/ SAW (Submerged Arc Welded) MS pipes of Outer dia (Fe-410 grade) conforming to IS 3589-2001 with latest amendments, including perfect linking and welding of joints to correct position, cost of the pipes, conveyance, lead, lift charges, cost of all labour and giving satisfactory hydraulic test as per IS 3589-2001 with latest amendments for test pressure and working pressure both at factory and site etc. complete as per detailed specifications inside with CM 1:1.5 lining of minimum 10mm thick for pipes upto 610mm OD and with minimum 12mm thick beyond 610mm OD and out side with minimum 25mm thick coating in CM 1:3 over 50 x 50mm weld mesh of 13 gauge, including loading and unloading of pipes for the following diameters and specified thickness of plate as noted below, including bailing out of water wherever necessary. (Contractor will make his own arrangements for procuring water for testing). For MS Pipes of 219mm dia Note: a) No Negative tolerance in respect of thickness is pemissible. b) Basic Cost of MS Plate is considered as Rs.71,700/- per MT c) The pipe costs are FOR destination anywhere in Karnataka.

code19 - Supplying and installing Temperature scanner suitable for operating at 110 V DC or 230 V AC mounted in a duly painted sheet metal enclosure provided with NO / NC relays for transmitting signal to VCBs for tripping with audible alarm for both windings and bearings RTDs with all otheraccessories for satifactory functioning of the system and all other ancillary operations complete as per specifications, terms and conditions of contract at Herkal (South) Headwork complete and as directed by Engineer-In-Charge..

code20 - Supplying of Transformer oil as per IS-335:1993 EHV Grade Transformer Oil-New(Material Code-601400) at Herkal South and North Headwork.

code21 - Supplying of grease GEM-RR3 at Herkal South and North Headwork.

code22 - Supplying of Fire Fighting equipments with necessary mounting stands.Foam extinguishing type.9 litre capacity at Herkal South and North Headwork.

code23 - Supplying of Safety shoes with Two Pair of socks. at Herkal South and North Headwork.

code24 - Supplying of Rubber Hand gloves 15 kV, SEAMLESS Confirming to ISS (Sample to be verified for seamless before approval) for electrical purpose.at Herkal South and North Headwork.

code25 - Supplying of Electrical Safety Helmet attached with Electronic Induction Teste at Herkal South and North Headwork.

code26 - Supplying of Screw driver : 12 inches size at Herkal South and North Headwork.

code27 - Supplying of Ring spanners : 12 nos. per set at Herkal South and North Headwork.

code28 - Supplying of Box spanners : 12 nos. per set at Herkal South and North Headwork.

code29 - Supplying of Cotton Waste at Herkal South and North Headwork.

code30 - Supplying of Line live tester at Herkal South and North Headwork.

code31 - Supplying of Insulated cutting pliers : 12 inches size at Herkal South and North Headwork.

code32 - Supplying of Rechargeable 5 W LED Hand Torch at Herkal South and North Headwork.

code33 - Supplying of first aid box. Complete at Herkal South and North Headwork.

code34 - Supplying of SAFETY MASK. Complete at Herkal South and North Headwork.

code35 - Supplying of FIRST AID CHART with lamination. Complete at Herkal South and North Headwork.

code36 - Supplying of Silica Gel at Herkal South and North Headwork.

code37 - Supplying and installation of RUBBER MAT 1mtrx1mtr-1Ommthick. complete including cost of materials, labour, usage charges of machinery complete as per specifications for Herkal South and North Headwork.

code38 - Supplying of Fire Fighting equipments with necessary mounting stands.Foam extinguishing type. 50 litre capacity at Herkal South and North Substation.

code39 - Supplying and erection of BATTERY SET : Plante/Grid Plate Type (8507) 110 V, 200 AH at Herkal South and North Headwork.

code40 - Testing & Commissioning of Battery Charge. Wiring: Identification, ferruling, crimping & connecting i) AC supply cable upto 2 sources ii) Load cables, connection at charger end upto 10 load point at Herkal South and North Headwork

code41 - Jelly Spreading (20-25 mm)Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants,removing exisiting jelly etc,complete. Work shall be carried out as per the instructions of Engineer incharge of works as per the standard procedure complete and as directed by EngineerIn -Charge.

code42 - Spreading of Stone Dust : Supplying and providing stone dust in the station yard or wherever required including watering, ramming, consolidating and dressing. The rate includes the cost of material, labour charges, required tools and plants etc., complete. Work shall be carried out as per the instructions of Engineer-in-charge of works as per the standard procedure complete and as directed by Engineer-In-Charge.

code43 - ACCESSORIES FOR MACHINERY / EQUIPMENT Lubricant at Herkal South and North Headwork.

code44 - Supply of LED floodlight 70W luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr Lumen Maintenance of 70%, CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection Min 5KV along with Over voltage/ Overload, short circuit/ miss wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with W System Power consumption. LED Efficiency 1301m/w, nominal CRI 75. Luminaire manufacturer should have in- house facility accredited by NABL / CPRI & any Government certified agency & Design & Development facility certified by ISO. Housing with supplier word mark / name shall be Engraved / Embossing on the die cast housing / Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. for Herkal South and North LIS Headwork

code45 - Supply of LED Streetlight 40W luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection Min 5KV along with Over voltage/ Overload, short circuit/ miss wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with System Power consumption. LED Efficiency 1301m/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source.for Herkal South and North Headwork

code46 - Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230V, 50cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 6.3.1for Herkal South and North Headwork (48" Sweep (1200 mm) Regular model)

code47 - 33kV Class HG Fuse Unit for Herkal North Headwork

code48 - Assisting in testing and commissioning of control panel (without SAS) for Herkal South and North Headwork

code49 - Testing of C&R panels:Testing for insulation level,testing of relays, control operations for closing tripping etc., interlock. Alarm annunciation & indication checks (without SAS) for Herkal south and North headwork

code50 - Overhauling of Non Return valve including dismantling, replacement of requisite spares, sealing gaskets, Nuts, bolts, washers, removal of rust using sand blasting process, surface preperation, applying two coats of Zinc Chromite red oxide and two coat of synthetic coal tar epoxy, re-errection, commissioning, checking for hydraulic tests etc., complete with all labour, materials, machineries, complete with all lead and lifts at Herkal Lift Irrigation Scheme Headwork and as directed by Engineer-In-Charge.

code51 - Overhauling of Butterfly valve including dismantling, replacement of requisite spares, sealing gaskets, Nuts, bolts, washers, removal of rust using sand blasting process, surface preperation, applying two coats of Zinc Chromite red oxide and two coat of synthetic coal tar epoxy, re-errection, commissioning, checking for hydraulic tests, checking for proper functioning of Electrically operated actuators etc., complete with all labour, materials, machineries, complete with all lead and lifts at Herkal Lift Irrigation Scheme Headwork and as directed by Engineer-In-Charge.

code52 - Dismantling, replacement with new journal bearing assemble and Sp. Roller bearing of bearing inside VT pumps supplied by the department, topping up with lubrication oil of Servo System 68 and re-erection of pumps including electric motor by making all electrical connections and commissioning with all necessary tools and tackles, cost of all labour, machineries, lead, exclusive of all taxes etc., complete and as directed by Engineer-In-Charge.