Keladi Shivappa Nayaka University Of Agricultural And Horticultural Sciences Tender

code47 - Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Microprocessed release and Earth Fault as per IS-13947. ( Icu = Ics) Four POLE , 125Amps 25kA. Group A

code50 - Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. GI strip 40x6mm

code31 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and coomplete wiring as required. 6-32Amps SP,

code87 - Supplying of Microphone stand make Model No. DGN of height 92-162cms, base diameter of 23cms, weight of 5.0Kgs of floor stand of floor standing mike stand made by SS type with side tightner including adjustable system ( including laobur charges ,HOM, Transportation, supplying &Fixing, wiring & accesories etc)(Standard Band as per the Engineer Directions

code95 - HDMI Cable 4sets, AUX cable 4Sets, USB Cable 4sets, VGA cable 4Sets, 230V 3 core cable 4Sets, Each cable sets of 50mtrs The each cable passed through PVC 6Kg pressure of 75mm dia pipe of 50 meter length( including laobur charges ,HOM, Transportation, supplying &Fixing, wiring & accesories etc)(Standard Band as per the Engineer Directions

code19 - 3.6.10 6/16Amps universal socket

code81 - Bass Instruments, Live Sound Type Cardioids Polar pattern 75 to 20,000 Hz, Sensitivity 4 mV / Pa (-48dBV) Max. SPL 144/156 dB SPL (for 1% / 3 % THD) Equivalent noise level 18 dB-A Impendence. Make: Shure S.M 57 (Standard Band as per the Engineer Directions( including laobur charges ,HOM, Transportation, supplying &Fixing, wiring & accesories etc)(Standard Band as per the Engineer Directions

code72 - Supply, testing & Commissioning of Sub Woofer Nominal Impedance: 8 ohms, Power Capacity: Continuous / Program / Peak: Passive: 3200W, Frequency Range: 31 hz 220 Hz (-10 dB) Make: including laobur charges ,HOM, Transportation, supplying &Fixing, wiring & accesories etc) Standard Band as per the Engineer Directions

code46 - Supplying.........amps rated 3phase with neutral bus bar using requiemed capacity electrolyticaluminium strips covered with heat shrinkable couloured PVC sleeve, mounted on phenolic/FRP/DMC insulator whcih are mounted on powder coated 40x6mm M.S.tlat frame work in existing panel board.The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary botls,nuts and washers etc., complete. b) 400Arnps 4x50x10mm Alluminium Strips

code55 - Labour charges for laying of 1.1 KV class UG cable when supplied agency in existing trench GI pipe / stoneware pipe / on wall / on pole as required. 25 sqmm to 75 sqmm

code66 - VIDEO MOUNT Equipment Rack Enclosure: Rack Enclosure, Black, Shelves and Blanks, SteelRack Enclosure ColorBlack FeaturesShelves and BlanksFeaturesAdjustable Front and Rear Rails; Reversible Tempered Glass Front DoorFinishPowder CoatedIncludesCastersDoorFansLeveling Feet MaterialSteelMounting LocationFloorOverall Height39 inOverall Width23-5/8 inOverall Depth23-5/8 inOverall Load Capacity1,000 lbRack Units18Manufacturer Part NumberEREN-18BrandVIDEO MOUNT ( including laobur charges ,HOM, Transportation, supplying &Fixing, wiring & accesories etc)(Standard Band as per the Engineer Directions

code43 - Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of pecentage leakage current, programable delay/auto/maunal reset facility suitable to mount on DIN rail/ flush mounting on panel board. a) Group A

code04 - Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.

code22 - 4 sqmm

code78 - Cordless Hand held microphone with complete set of transmitter, receiver and microphone with 650-865 MHz frequency range UHF with receiver power Cable. Make: Shure ( including laobur charges ,HOM, Transportation, supplying &Fixing, wiring & accesories etc)(Standard Band as per the Engineer Directions

code48 - Fabricating supplying and mounting MS box made out ... SWG suitable for floor/wall mounting, fully weatherproof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete. b) 16SWG

code59 - Fixing halogen/metal hallide/SVL/IL floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires complete.

code28 - Fixing all types and all capacities fluorescent/false ceiling/spot light/ CFL fittings indoor on the wall /ceiling/rafters/girders using 23/ 0.0076 twin twisted PVC insulated wires, required nos of round blocks and clamps (if required). a) On wa/ceiling/Rafter/Girders

code05 - Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

code69 - Auditorium Stage Light Halogen Par Can Light( including laobur charges ,HOM, Transportation, supplying &Fixing, wiring & accesories etc)(Standard Band as per the Engineer Directions

code92 - XLR TO XLR Microphone Cable(15Mtrs) with 2 core cable top ceilded & rubber sleeving , soldring for charsie connectors for both side each 15mtr lenghth including XLR Connectors.( including laobur charges ,HOM, Transportation, supplying &Fixing, wiring & accesories etc)(Standard Band as per the Engineer Directions

code18 - 3.6.9 32Amps DP switch

code74 - Two Way Stage Monitor Speaker Frequency Range (-10 dB ):48 Hz - 20 KHz Coverage Pattern: 50 x 90 Crossover Frequency: 1.1 KHz Power Rating: Active Full-Range RMS-300W Peak-1200W Make: LD ICOA15A( including laobur charges ,HOM, Transportation, supplying &Fixing, wiring & accesories etc)(Standard Band as per the Engineer Directions

code85 - Interconnecting cables with end connectors Neutrix connecting to DBX, Amplifier, Equalizer, Mixer XLR, Phono Jack, Ear Phone Jack 23 Stand Cable. (Standard Band as per the Engineer Directions( including laobur charges ,HOM, Transportation, supplying &Fixing, wiring & accesories etc)(Standard Band as per the Engineer Directions

code29 - Supplying of recess mounting non integral type ........ LED w lumina ire comprising of pressure decast extruded aluminium housing, with spring loaded false ceiling clamps, Power LEOs with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per watt, 120degree beam spread, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEOs are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, , THO less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABLI CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. LED modular down light 1x1 24watts

code53 - 3.5 core 150 sqmm

code41 - Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Microprocessed release and Earth Fault as per IS-13947. ( Icu = Ics) Four POLE , 250 Amps 36kA. Group A

code06 - Open Conduit System Supplying heavy gauge PVC conduit pipe …….dia confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone structure or rawl plugs in case of brick walls and cement plastering damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 19/20mm dia 2mm thick

code83 - Speaker Cable: Providing Laying cabling for speakers with 40/36x23/36 cable in conduit including fixing to the walls ceiling boards with guttas redoing the damage portion etc. Complete including testing and commissioning ( including laobur charges ,HOM, Transportation, supplying &Fixing, wiring & accesories etc)(Standard Band as per the Engineer Directions

code63 - Supplying and fixing of Metal Socket set of 2pole and earth plugs andsocket for incorporating SP and TP MCB (Without MCB). The entireplug and socket shall be mounted in a thermoplastic /powder coatedmetal box & wired CompletelyTP & N (Standard Band as per the Engineer Directions) 30 A

code80 - Lead Vocals Live Sound Mice Polar pattern supercardioid, Frequency range 70 Hz to 20 kHz, Sensitivity 2.6 mV / Pa (-52 dBV), Max. SPL 147/156 dB SPL (for 1 / 3THD), Equivalent noise level 18 dB Make: Shure S.M58 with Berenger ( including laobur charges ,HOM, Transportation, supplying &Fixing, wiring & accesories etc)(Standard Band as per the Engineer Directions

code14 - 2.2.3 Long point above 6Mtr up to 10Mtr from tapping point to out let via switch box

code84 - Microphone Cable: Providing Laying cabling for Microphones with 8core Cable with tighter Beading in conduit including fixing to the wall ceiling boards with gutts redoing damage portion With XLR ( including laobur charges ,HOM, Transportation, supplying &Fixing, wiring & accesories etc)(Standard Band as per the Engineer Directions

code21 - 2.5 sqmm

code68 - Auditorium Stage FOG Spot Light ( including laobur charges ,HOM, Transportation, supplying &Fixing, wiring & accesories etc)(Standard Band as per the Engineer Directions

code13 - 2.2.2 Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch box

code57 - Supplying & Fixing Chemical earthling for grounding. Conduits, IC cut-outs & other equipments backfill compound which is non-corrosive, thermally conductive, potential to permissible limits, superior Fault conduction capacity, non toxic, weather resistance & capable of achieving ohmic value less than one ohm

code75 - Delay Speakers At 18m Dispersion (H x V) 90 x 50 Load rating (RMS)-250 W Dispersion (H x V)-90 x 50 Peak power-1000 W Frequency response-55 Hz 20000 Hz Crossover frequency-2000 Hz SPL (1W/1m) 93 dB Max. SPL-123 dB Impedance-8 Ohm(s) Make: LD Systems ICOA 12A ( including laobur charges ,HOM, Transportation, supplying &Fixing, wiring & accesories etc)(Standard Band as per the Engineer Directions

code30 - LED modular down light 1' x 4', 34-36 watts

code24 - 10 sqmm

code09 - 10-12Way

code44 - Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accurecy. With tape wound. a) Group A

code54 - Digging of trench of 0.6m deep x 0.50 mtr wide refiling the trench to the required ground level and consolidating etc., complete.(As per Civil SR KSRB I-2, P-7)

code15 - 2.2.4 Two outlet in a row, above 3Mtr up to 6Mtr from tapping point to out let via switches

code91 - DI Box with Unbalanced & balanced input & Balanced Output, Must Have-20dB pad & earth lift switch , Should be able to run either battery & console Phantom power, make : BSS, Behringer( including laobur charges ,HOM, Transportation, supplying &Fixing, wiring & accesories etc)(Standard Band as per the Engineer Directions

code12 - Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5Sqmm(Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLSmulti strand PVC insulated copper wire (confirming toIS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for eachoutlet. 2.2.1 Short point up to 3Mtr from tapping point to out let via switch box

code16 - Supplying and fixing of modular switch & connectedaccessories on existing modular switch plate as per IS 3854and IS 1293. 3.6.1 6Amps one way.

code10 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Moudule

code88 - Supplying of microphone stand make Model No. DGT of height 35-53cms, base diameter of 16cms stand made by SS type with side tightner including adjustable system ( including laobur charges ,HOM, Transportation, supplying &Fixing, wiring & accesories etc)(Standard Band as per the Engineer Directions

code02 - Providing and laying of teak wooden polished flooring of 12mm thick, high density timber of approved colour and design with end trims, transition, profiles, beading, 15mm thick felt, and 20 micron polyester film with 4mm thick foam underlay etc.,

code86 - Amplifier Rack: Supplying of M.S Rack with powder coated adjustable self and Amplifier Internal connecting cable with power distribution board and cooling Fan Make: Modular/ Custom ( including laobur charges ,HOM, Transportation, supplying &Fixing, wiring & accesories etc)(Standard Band as per the Engineer Directions

code56 - Supplying, fixing and wiring Electronic Trivector Meter (ETV)5 to 32/63 Amps three phase 4 wire whole current class-1Accuracy Energy Meter.

code60 - Supplying & fixing...mm dia class A Gi pipe bracket up to 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street light fitting of all capacities on raii/RCC/wail/tubular pole, using suitable clamps, bolts and nuts and wiring using suitable capacity wires etc complete. Using 32mm dia G.I.pipe

code61 - Universal Voltage driver to operate wide voltage range from100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ....... W System Power consumption. LED Efficiency 1301m/w, nominal CRI 75. Luminaire manufacturer should have in- house facility accredited by NABLICPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved I Embossing on the die cast housing/ Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Floodlight 240W

code64 - MOVING LIGHT CONTROLLER DMX512 Total Channels 1024 MAX Intelligent Fixtures 120 MAX Playback Programs 300 MAX Preset Focus 20 MAX Groups 20 Scene snapshots 40 Shape Generator YES LCD Display Screen YES Chinese English Synchronous Trigger Mode Auto1, Auto2, Music Library Format R20 Format USB Port YES Music Control Signal Input Line level input MIC input Power Supply Switch Power Supply, AC 100 240V 50/60Hz Power 15W Size 482mm 440mm 108 mm ( including laobur charges ,HOM, Transportation, supplying &Fixing, wiring & accesories etc)(Standard Band as per the Engineer Directions

code01 - Providing and supplying 'Acoustical Wall Paneling' with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and classified for Fire reaction Class A, as per ASTM E-84, fabric with option of colors - as per the choice of the Architect/Engineer incharge of the size 600x600mm, 600x1200mm & 600x1800mm providing a minimum sound absorption level of 0.85 NRC to be affixed to wall using Wall panel lmpaler sand construction adhesives as per the instructions laid down by the certified manufacturer.

code36 - Supplying & fixing Chemical earthing for grounding. Conduits, IC cutouts & other equipments backfill compound which is non-corrosive, thermally conductive, potential to permissible limits, superior Fault conduction capacity, non toxic, weather resistance & capable of achiveing ohmic value less than one ohmUsing 10ft. Copper bonded rod with backfill compound

code35 - 12 Way TP &N

code34 - Supplying and fixing regular MCB distribution boards on wall / woodboard/flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting etc., complete. II - Double Door, 4 Way SP & N

code77 - Gooseneck Microphone (Podium Mic): Professional high quality 21” gooseneck microphone with Base, Electret gooseneck microphones with LED, Supercardioid polar pattern Make: Studiomaster Flex4 ( including laobur charges ,HOM, Transportation, supplying &Fixing, wiring & accesories etc)(Standard Band as per the Engineer Directions

code58 - Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency 130lm/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/Lumileds/Osram make LED Source. 90 Watts

code49 - Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. a) 40x40x6mm

code89 - Mike termination box 3Pin XLR Female chassis mount connector with wooden box & top CR Seat plate including XLR whole, Net bolts & anchoring bolts ( including laobur charges ,HOM, Transportation, supplying &Fixing, wiring & accesories etc)(Standard Band as per the Engineer Directions

code08 - Supplying and flush mounting powder coated/galvanised metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way

code51 - Supplying of 1.1 KV LT UG cable XLPE or Heat resistantPVC insulated, PVC extruded Inner sheath armoured UG LTcable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouringstrip thickness in average +5% andresistivity 14 Ohms/Kms(Max) as per IS-3975 4 core 16 sqmm

code73 - Array Frame for suspending VRX932LA-1/P, VRX918s/P enclosures. Includes Quick Release Pins, Shackles, Drop Levers Make:, LD Systems ( including laobur charges ,HOM, Transportation, supplying &Fixing, wiring & accesories etc)(Standard Band as per the Engineer Directions

code90 - Supply, testing & Commissioning of Power Amplifier-Frequency Response (at 1W) 22Hz, Signal to Noise ratio no Weighting95 dB, THD 0.5%, Power output at 4ohm 3000 per Channel at 80hm 2000 per Channel, Input XLR Connectors, output Connectors, 4 pole & 2 pole Speakon Connectors, with Clip, Power and fault indicators, with internal heat sinks with forced air cooling.Make: Crown 6002 ( including laobur charges ,HOM, Transportation, supplying &Fixing, wiring & accesories etc)(Standard Band as per the Engineer Directions

code23 - 6 sqmm

code33 - 50-63Amps TPN

code03 - Providing & Fixing of High Acoustical False Ceiling having NRC (Noise Reduction Coefficient) 0.90 (minimum) using Integral Densified edged Eco Friendly Fully Perforated Lightweight Calcium Silicate False Ceiling Tiles with Suitable to Modular Grid Size of 600x600mm with PPGI Slimline profile Balck/White reveal T 15 Grid system for Auditoriums, Community halls, Lecture Halls, Airports, Offices, Factories and All other High Acoustics required buildings. The Fully Perforated Lightweight Calcium Silicate False Ceiling tiles shall be made from Non Cementitious Hydrated Calcium Silicate Slurry/Mixture, Reinforced recycled material with fibers and natural fillers. Free from Formaldehyde and other harmful materials Doesnt contain any toxic ingrediants. The thickness of tiles should be 15mm at all around the edge resting portion with integral densified edge and 10mm thick at the quadrant. The tiles should have fiber glass fleece on rear side along with backing of 50mm thick rockwool slabs of density 48kg/m3 to achieve NRC 0.90 (Minimum).The tiles should have Humidity Resistance (RH) of 100%, Water Resistance, Non Combustible as per BS:476 Part-4, Fire Performance: Fire Propagation as per BS:476 Part-6, Class-1 for Surface Spread of Flame as per BS:476 Part 7, Class A or Class 1 as per ASTM E 84, Thermal Conductivity K= 0.048 to 0.052 w/m K as per ECBC code 2007, Size of the tile is 595x595mm, Density of tile should be 450 kg/m3 density all around on edge resting portion and 350kg/m3 density at the Quadrant, Light Reflectance 85%, Weight of the tile is 5-5.5 kg/m2 and Suitable for Green Building application with InOrganic Recycled content of 50% and meets the GRIHA norms under the categories: GRIHA V.2015 criterion:11&12, GRIHA V.3 criterion: 17&29 and SVAGRIHA criterion:12. The tiles Shall be laid on 15mm wide Polyester Powder Coated Galvanized Iron (PPGI) Slimline Profile Black/White reveal T-Sections Flanges colour white having rotary stitching double webbed on all T sections. The framework shall comprise of Main T runner with a web height of 38mm and 1200mm & 600mm Cross Tees with a web height of 38mm having sheet thickness of 0.4mm.The T sections should have Galvanizing of 120 g/m2 and need to be installed with Suspension system consisting of 12x50mm long dash fastners, Z cleat 25x37x25x1.6mm with pre cut hole on both 25mm flange to accomdate the 6mm dia bolt of the fasterner on one flange and 6mm fully threaded hanger rod uptom 1000mm length on the other. L-shape level adjuster of size 76x25x1.6mm to be fixed with T grid main runner. The entire grid rests on the perphery on a pre coated GI wall angle of size 15x20mm of sheet thickness 0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450mm center to centerand 40mm long s.s screws. The work shall be carried out as per specifications, drawings and as per direction of Engineer in Charge

code45 - Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C. a) Group A

code71 - Supply, testing & Commissioning of Line Array Speaker Frequency Range (-10 dB) 1:57 Hz-20 KHz Frequency Response ( 3dB) 1:75 Hz-20 KHz Coverage Pattern: 100 x 15 nominal, Crossover Modes: Bi- amp / passive, externally switch able Crossover Frequency: 1.2 KHz, Power Rating Passive: 3200W (Continuous / Program / Peak). 12" JBL Speaker HF 2 Nos with Wooden cabinate with stand Make: VRX932 " ( including laobur charges ,HOM, Transportation, supplying &Fixing, wiring & accesories etc)(Standard Band as per the Engineer Directions

code82 - Sound Mixer with 24-channel stereo, +48v phantom power, XLR inputs and stereo phone jacks, playback inputs and record outputs. frame sizes Up to 40 inputs (including stereo inputs and returns) 18dB/octave high-pass filter 6 aux sends, 4 of them pre/post switchable Group and mix inserts 12-segment LED metering Make: Mackie/Yamaha. ( including laobur charges ,HOM, Transportation, supplying &Fixing, wiring & accesories etc)(Standard Band as per the Engineer Directions

code07 - 25mm dia 2mm thick

code17 - 3.6.3 6Amps 3way socket.

code67 - Auditorium Stage 1000W Profile Spot Light ( including laobur charges ,HOM, Transportation, supplying &Fixing, wiring & accesories etc)(Standard Band as per the Engineer Directions

code79 - Microphone Cordless Head Mic with complete set of transmitter, reciever and microphone with 650-865 MHz frequency range UHF with receiver power Cable. Make: Shure ( including laobur charges ,HOM, Transportation, supplying &Fixing, wiring & accesories etc)(Standard Band as per the Engineer Directions

code37 - Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proprotion of salt and charcoal 150mm alround the pipe to complete depth. The connection from the pipe to the conduit etc, is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and checknuts etc, the pipe shall have 16 through holes of 122 mm dia.(68/1)

code20 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper With low conductor resistance single core cable in open or concealed system of wiring with specified IS 694:1990 & Conforming to GTP of GROUP-A 1.5 sqmm

code32 - 50-63Amps DP

code76 - Loudspeaker management system- with 2 inputs and 6 outputs on XLR connectors, Feedback elimination, 2.7 seconds of alignment and zone delay, compression and limiting functions, Graphic and parametric EQ, Auto EQ Function, Full band pass, crossover and routing configuration, Auto Gain control. Make: Dbx or equivalent 360 DBX ( including laobur charges ,HOM, Transportation, supplying &Fixing, wiring & accesories etc)(Standard Band as per the Engineer Directions

code52 - 3.5core 25 sqmm

code94 - P2 Indoor LED Video Wall. Wall Size :Width: 19.68 FT Height: 9.84 FT Pixels Wide: 2400 Pixels High: 1200Electrical Peak Watts:38880 W Ampere at 230V (max): 169.04 Arequired Processors (min) HD (1920x1080): 4 4K (3840x2160): 1 ( including laobur charges ,HOM, Transportation, supplying &Fixing, wiring & accesories etc)(Standard Band as per the Engineer Directions

code65 - 12 CH DMX DIMMER PACK Power AC 100-240V, 45-63Hz, 30 4W Output Maximal output is 20A per channel (Please refer to the before installation) Protocol DMX512 Analog Signal Connector XLR 5-pin (Male x1, Female x1), 6p4c phone jack (x2) Dimension DX-1227: 482(W) x 132(H) x 312(D) mm Location DX-1227: 19" 3U Standard rack Weight DX-1227: 13.5 Kg ( including laobur charges ,HOM, Transportation, supplying &Fixing, wiring & accesories etc)(Standard Band as per the Engineer Directions

code70 - Pyle Moving Stage Light - for Professional DJ Show Performance or Dance Party with Rotating RGB Color LED Projector Bulb, Flashing Disco ( including laobur charges ,HOM, Transportation, supplying &Fixing, wiring & accesories etc)(Standard Band as per the Engineer Directions

code93 - Novastar Processor VX1000 & VX600

code26 - providing and fixing high volume low speed ( HVLS) fan for ceiling , fixing new ceiling fan technology design to circulate more air volume in the facility effeciently and effectively by pulling the air from above the fan pushing in down conical shape to the floor below by rotating at optctimized low speed low power consuption dia 12 feet(3.6m ,no of blade 5, power 1.1KV 3phase supply speed 110 RMP fan wgt 45 kg ( including laobur charges ,HOM, Transportation, wiring & accesories etc)

code42 - Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy.

code27 - Supplying of ......feet - PVC Batten with integrated LED tube.....W with high quality diffuser with Life of 25000 burninghours & 70% lumen maintenance with CRI 80. PowerInput: 220-240V @ 50/60Hz & Power factor 0.9 along withCE approved. 2 years Warranty against any manufacturingdefect working under standard electrical condition.LED light fighting 1x 4' - 36 /40 w

code40 - Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. (Open Execution) 250 Amps

code62 - Supply and Installation / Fixing / Provision of Outdoor typeThermoplastic Modular Panel enclosure with transparentPolycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof,dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase / Three PhaseEnergy Meter in suitable base plate and having a provision for Fuse /MCB cut-out with suitable transparent hinged flap opening foroperating MCB along with complete tamper proof SEALING facility. 600 mm x 600 mm x 170 mm

code25 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 11 00 Volts as per IS-694:19904CX4Sq.mm