Karnataka Urban Water Supply And Drainage Board Tender

Load side cable:- Supply and delivery at site brand new Board approved make or any other make to be approved by the Board Aluminium satndard conductors PVC insutated, sheathed steel tape/wire armoured , PVC outer sheated 1.1 KV class UG Cable conforming to the latest ISS 1554. 3x 50 Sq mm

Load side cable:- Supply and delivery at site brand new Board approved make or any other make to be approved by the Board Aluminium satndard conductors PVC insutated, sheathed steel tape/wire armoured , PVC outer sheated 1.1 KV class UG Cable conforming to the latest ISS 1554. 3x 70 Sq mm

LAYING OF CABLE: Laying of load side cable: Running the cable in existing ducts including properly securing cable in position etc, complete using all the required materials etc, complete. 3 1/2 x 95 Sqmm

Laying of load side cable: Running the cable in existing ducts including properly securing cable in position etc, complete using all the required materials etc, complete. 3x 50 Sq mm

Laying of load side cable: Running the cable in existing ducts including properly securing cable in position etc, complete using all the required materials etc, complete. 3x 70 Sq mm

Cable Terminations: Termination of cable using Copper lugs to the terminal end for solderless crimping to aluminium conductor by adopting cirimping tool. 3 1/2 x 95 Sqmm

Cable Terminations: Termination of cable using Copper lugs to the terminal end for solderless crimping to aluminium conductor by adopting cirimping tool. 3x 50 Sq mm

Cable Terminations: Termination of cable using Copper lugs to the terminal end for solderless crimping to aluminium conductor by adopting cirimping tool. 3x 70 Sq mm

D G Room Fabrication supplying and erecting M.S.tubular trusses of all spans with prefabricated steel applications using quality material and are durable, reliable and corrosion and abrasion resistant. Welding shall confirm to latest structural welding code. Quality shall be on various parameters like shape, seze, design gauge and polish. The entire trusses is anchored in RCC column by using 4 nos of M.S. anchor bolts at each support with 10mm thick base plate and show plate. The work includes cutting, straightening, placing in position of M.S. pipes and welding whrerever necessary and applying one coat of redouxide primer coat to all the members including cost of all mateirals, labour charges, and hiree charges of machineries for cutting, welding, grinding and erection equipments, with all lead and lift, transportation, lets., complete as per specification

Providing and installing of approved make pre painted Galvalume iron Accessories, like, plain, ridges, plain,gutter, plain flashing, corner Trim, etc. The total coated thickness(TCT) of the sheet shall be 0.47 mm +/-0.02 tolerance mm Zinc-Alu Alloy coating AZ 150 gsm as per ASTM 1397/755-550 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top cost 20-22 microns using self drilling / self tapping screws of 25 mm length. (width upto 500-600 mm only), to be fixed over the existing purlins, rafters, channels and trusses.

Providing ISMB Supports for Placing 250 KVA DG Sets over Roof Roof Slab

Removing 250 KVA DG Set from DG Room and placing the same suitable above the RCC roof slab of DG Room, and Control Panel, AMF panel including removing and refixing of existing cable, to make good to run the DG set by using suitable capacity cranes, labours, required electrical accessories for connections of DG sets, AMF panel and Control Panel and other electrical accessories etc complete

Repair/ Servicing of H.T Metering cubicle including lifting up to the height to avoid flood damage, cleaning CT, PT chamber, heating of CT PT, including cable jointing kit indoor type, putting bitumen for leakage proof joint etc. complete.

Providing and applying enamel metal paint two coats (excluding priming coat) over new steel or other metal surface brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter, including cost of materials, labour, complete as per specifications.

Engaging Unskilled labour for cleaning the surface of wetwell floor

Providing and laying in position plain cement concrete of mix 1:2:4 with OPC cement @ 240 kgs, with 20mm and down size graded granite metal coarses aggregates @0.878cum and fine aggregates @0.53cum machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, plinth and cills, including cost of all materials, labour,HOM curing complete as per specification.

Providing and constructing burnt brick masonry with approved quality of modular bricks of standard size of class designation 5.0 Newton per sqmm (table moulded) with cement mortar 1:4 for basement and superstructure including cost of materials, labour charges, scaffolding, curing complete as per specifications

Providing 15mm thick cement plaster in single coat with cement mortar 1:4 to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing, complete as per specifications.