Karnataka Urban Infrastructure Development And Finance Corporation Tender

HMD01 - PART A: Network, Machine holes, House Service Connections and construction of Lab cum Office room: a) Excavation in all kind of strata at varying depths for pipelines, road restoration and Machine holes. b) Providing, laying and jointing of Sewer Pipeline by using 160 mm to 200mm dia UPVC SN-8 class as per IS16098; 213 with latest amendments along with Hydraulic test for minimum length of 9.10km including necessary concrete anchoring & pipe protection, diversion of water course if required and restoration works in flexible and rigid pavements. c) Providing, laying and jointing of Sewer Pipeline by using 200 mm & 250mm dia DI K-7 and 350mm dia of K-9 class as per IS 8329:2000 with latest amendments along with Hydraulic test for minimum length of 0.04km including necessary concrete anchoring & pipe protection, diversion of water course if required and restoration works in flexible and rigid pavements d) Providing, laying and jointing of Sewer Pipeline by using 300 mm to 450mm dia S&S RCC spun pipes NP-3 class conforming to IS 458:1988 with latest amendments along with Hydraulic test for minimum length of 0.57km including necessary concrete anchoring & pipe protection, diversion of water course if required and restoration works in flexible and rigid pavements e) Providing and Construction of minimum number of 341 Nos RCC machine hole chambers, of 1.2 m & 1.5m, dia cast-insitu / Pre-cast with heavy duty SFRC cover and frame, for varying depths (the depth may vary as per the site condition). f) Providing minimum of 5655 Nos House service connection which shall be laid from inside the customer property to Machine hole as per site condition. g) Construction of 6mX4m size Lab cum office room. h) Restoration of dismantled Asphalt and Concrete Roads Note: i) Diversion of water course, if required, and Road restoration as per site requirement. ii) Road crossing works by Trenchless Technology with MS pipes of required dia and thickness mm (Fe 410 grade) as per IS 3589-2001 with latest amendments, for crossing of Highway iii) Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding. Rubble stone masonry in cement mortar and Cement Concrete Grade M-15 & M-20 and restoring to original condition. iv) Other allied works to complete the work. v) Any other appurtenance / allied works applicable as per the site conditions and design requirements vi) The Machine hole and pipe line should be designed by taking care of HFL, buoyancy, afflux and other precaution while laying in the Nala

HMD10 - Part-F: Operation & Maintenance of 1 new and 3 existing Wet wells: e) 5th Year Operation & Maintenance of 1 new & 3 existing Wet wells for 5 years excluding power charges. Note: 1) All works and items shall be executed as per the IS, MoRTH specifications, CPHEEO guidelines and specifications mentioned in the contract. 2) Work shall be carried out as per the instructions of the engineer incharge.

HMD05 - PART E: Ugradation of existing 6.0MLD WSP type STP to 8.0 MLD NEBR type STP: Upgradation of existing 6 MLD WSP type STP to Natural Endogenous Bio Reactor (NEBR) type STP of 8.0 MLD capacity, and with allied works. With 10 years O & M by technology provider. a) Supply, Erecting, testing and commissioning with all necessary components viz., (1)NEBR Filter media units of minimum 260 units/MLD, (2) Wetland rafts of minimum 220 units/MLD and (3) Hydroxidiser of minimum 18 units/MLD with necessary civil, electrical items to make the Natural Endogenous Bio Reactor (NEBR) type STP to bring the treated water to satisfy NGT norms. b) Providing the following appurtenance/Allied works applicable as per the site conditions and design requirement 1.Sinking of minimum 150 dia bore well of minimum depth of 200 mtr and providing suitable Submersible Pump of minimum 5.0 HP 3 phase (with Bronze / Stainless steel (CF8M) Impeller) up to 12 stages confirming to IS:8034-2000. 2.Providing HDPE pipe grade PE100-PN 8, 63mm of minimum length 100 mtr to install the pump set. 3.Construction of rectangular receiving chamber (1.2*1.2*1.5mtr.) with RCC minimum 4 Nos. 4.Construction of RCC Sludge drying bed minimum 2 Nos of 25X2 Mtr and construction of Disinfection unit of minimum size 15X2.40 mtr. 5.Providing and placing polyethylene water storage tanks of minimum 7 Nos as per requirement for Bio Culture dosage 6.Power Generator (100 KVA/ 80 kw) (RA 276) c) Providing water diversion pipe line of RCC NP3 of dia 350mm for minimum length of 0.150 km. d) Providing manual bar screen to existing PTU of existing wet well. e) Providing required DI Air valves, electromagnetic flow meters wherever necessary Operation and Maintenance cost of NEBR Type STP of 8 MLD capacity to be borne by the agency for 10 years including one-year DLP with free of cost (power charges to be borne by ULB). Agency should submit MOU with the technology provider for providing 10Years O&M at free of cost Note: i) Diversion of water course, if required, and Road restoration as per site requirement. ii) Road crossing works by Trenchless Technology with MS pipes of required dia and thickness mm (Fe 410 grade) as per IS 3589-2001 with latest amendments, for crossing of Highway iii) Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding. Rubble stone masonry in cement mortar and Cement Concrete Grade M-15 & M-20 and restoring to original condition. iv) Other allied works to complete the work. v) Any other appurtenance / allied works applicable as per the site conditions and design requirements.

HMD03 - PART C: Electrical works: a) Supply, errection and commissioning of 4.5km 11KVA express feeder line for proposed wet well of zone-2. b) Supply, errection and commissioning of 63KVA transformers for proposed wet well of zone-2. c) Rehabilitation of existing network and repair of existing machine holes of about 3.0km and 130 MH by desilting of sewerlines by mechanical (Jetting,Sucking,Grabber,Scrapper etc.,). d) Other allied works to complete the work. e) Any other appurtenance / allied works applicable as per the site conditions and design requirements. Note: i) Diversion of water course, if required, and Road restoration as per site requirement.ii) Road crossing works by Trenchless Technology with MS pipes of required dia and thickness mm (Fe 410 grade) as per IS 3589-2001 with latest amendments, for crossing of Highway iii) Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding. Rubble stone masonry in cement mortar and Cement Concrete Grade M-15 & M-20 and restoring to original condition. iv) Other allied works to complete the work. v) Any other appurtenance / allied works applicable as per the site conditions and design requirements

HMD06 - Part-F: Operation & Maintenance of 1 new and 3 existing Wet wells: a) 1st Year Operation & Maintenance of 1 new & 3 existing Wet wells for 5 years excluding power charges including Deflect Liability Period. Note: 1) All works and items shall be executed as per the IS, MoRTH specifications, CPHEEO guidelines and specifications mentioned in the contract. 2) Work shall be carried out as per the instructions of the engineer incharge.

HMD08 - Part-F: Operation & Maintenance of 1 new and 3 existing Wet wells: c) 3rd Year Operation & Maintenance of 1 new & 3 existing Wet wells for 5 years excluding power charges.Note: 1) All works and items shall be executed as per the IS, MoRTH specifications, CPHEEO guidelines and specifications mentioned in the contract. 2) Work shall be carried out as per the instructions of the engineer incharge.

HMD04 - PART D: Rehabilitation of existing 6 MLD WSP type STP: a) Rehabilitation of Anerobic Ponds, Polishing Pond and other allied works for existing 6 MLD WSP type STP b) Supply, installation and commissioning of Electromagnetic Flow Meter (EMF) As Per ISO 4064-400mm, Motorized Knife gate valve -400mm dia with Bypass arrangements (Influent and Effluent EM flow Transmitters) c) OCEMS unit - supply, installation, testing & commissioning of 8 MLD NEBR Type STP along with other connected accessories to monitor inlet and Outlet Sewage parameters namely Ph, BOD, COD, TSS, Total phophrous, Total Nitrigen, communication interface enable with RS-485/RS-232/RJ45 ethernet port protocal should be modbus. vendor shoud provide modbus register for SCADA integration etc, with IOT based SCADA INTEGRATION SYSTEM for OCEMS and Flow meters along with Civil work complete d) Other allied works to complete the work. e) Any other appurtenance / allied works applicable as per the site conditions and design requirements. Note: i) Diversion of water course, if required, and Road restoration as per site requirement. ii) Road crossing works by Trenchless Technology with MS pipes of required dia and thickness mm (Fe 410 grade) as per IS 3589-2001 with latest amendments, for crossing of Highway iii) Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding. Rubble stone masonry in cement mortar and Cement Concrete Grade M-15 & M-20 and restoring to original condition. iv) Other allied works to complete the work. v) Any other appurtenance / allied works applicable as per the site conditions and design requirements