Karnataka State Open University Tender

code04 - Supplying Installing, testing and commissioning of 19mm dia 40.0m length hose with rubber lining smooth bore, reinforced of natural or synthetic fibres, a rubber cover finish shall be smooth, fluted or fabric marked with minimum thickness of 1.50mm and to with stand a working pressure of 10Kgf per sqcm confirms & tested as per IS 444 IS 12585 including cost of materials, labour, usage charges of machinery complete as per specifications

code05 - Supplying Installing, of M.S. Pressed reel of 600mm dia swinging type motion which allows a 180degree swing and conforms to IS 884 85 or Aluminium fitting Single Piece Compact Type. including cost of materials, labour, usage charges of machinery complete as per specifications

code06 - Supplying Installing, testing and commissioning of Gun metal AIR RELEASE VALVE SIZE OF 25mm dia including cost of materials, labour, usage charges of machinery complete as per specifications. Complete

code07 - Supplying, installing , testing and commissioning of PN16 CI butterfly valves of confirming to IS 13039 with necessary nuts & bolts etc complete etc complete as per specificaiton with all lead and lift, loading unloading, labour, hire charges of machineries and all such incidental charges necessary for successful completion of work and as per directions of the Engineer-in-charge of the work 100mm dia CI butterfly valves

code08 - Supplying Installing, testing and commissioning of Gun metal BALL VALVE SIZE OF 25mm dia including cost of materials, labour, usage charges of machinery complete as per specifications. Complete

code09 - Supplying Installing, testing and commissioning of Gun metal BALL VALVE SIZE OF 19 or 20mm dia including cost of materials, labour, usage charges of machinery complete as per specifications. Complete

code10 - Supplying installing, testing and commissioning of PN16 CI Non Return Valve confirming to IS 13039 with necessary bolts and nuts etc complete includes cost of all materials labour charges with all lead lift loading and unloading transportation etc complete etc complete as per specificaiton with all lead and lift, loading unloading, labour, hire charges of machineries and all such incidental charges necessary for successful completion of work and as per directions of the Engineer-in-charge of the work 100 mm Dia CI Non Return Valve

code11 - Pressure guage of 150 mm dia including Isolation Valve and forged siphon Tube including with all accssories as per IS Spec. etc complete as per specificaiton with all lead and lift, loading unloading, labour, hire charges of machineries and all such incidental charges necessary for successful completion of work and as per directions of the Engineer in charge of the work

code12 - Supply, installation, testing and commissioning electrically driven Terrance pump of capacity 450.0 Lpm at 35.0m Head bronze impeller pump coupled to electrical driven motor with suitable HP with all the necessary accessories, operating on 3Ph 50Hz, 400 440V AC supply including required foundation for pump, anti vibration pad, founadtion bolts etc. complete. Including cost of materials, labour, usage charges of machinery complete as per specifications and control panel is not included. Required GA drawingfor the pump/ foundation shall be submitted by the contractor.

code13 - Wraping and Galing of UG pipe line work includes one coat of anti corrossion paint Black and two coats of Bituminous cloth. including cost of materials, labour, usage charges of machinery complete as per specifications. 100 mm dia.

code14 - Scrubbing, removing and applying of one coat of red oxide primer and final two coats of Signal Red paint on existing GI pipes 25 mm Nominal Bore etc complete with all leads And lifts as per specifications and as directed by the Engineer in charge

code15 - Scrubbing, removing and applying of one coat of red oxide primer and final two coats of Signal Red paint on existing GI pipes 100 mm Nominal Bore etc complete with all leads And lifts as per specifications and as directed by the Engineer in charge .

code16 - Transportation etc complete. etc complete as per specificaiton with all lead and lift, loading unloading, labour, hire charges of machineries and all such incidental charges necessary for successful completion of work and as per directions of the Engineer-in-charge of the work 100 mm Dia CI Y stainer

code17 - 1.1 kV XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS 1554 Part- 1 or IS 7098 Part1, Armouring strip thickness and resistivity as per IS 3975 16 Sqmm, 4 Core, 11 GI Strips 4 x 0.8 mm

code18 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130 1984 and Virgin PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS 694 1990 4C x 1.5 mm2

code19 - Providing ABC Powder based MAP 50, 6Kg Supply and installation in position, testing and commissioning 6kg Fir e Ex tinguisher Mono Ammonium Phos phate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 9.5 Kg, empty weight 3.5 Kg, Can Height 435MM, Diameter 160MM, Discharge Time less than 9 Sees, Controllable discharge mechanism Squeeze grip with easy snap safety seal Range minimum 4 meters, applicable on Class A,8,C and electrically started Fire, A Rating 3A, 8 Rating 218, Can construction : Deep drawn & Co., Mig welded, valve Construciton : Forging and Mechining, Internal Coating of Can: Epoxy powder coating, External Coating of Can: Epoxy PoIyster power coating, Sheet metal thickness: 1.60MM, 5 years Warranty with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost cost of supporting materials like MS stand & accessaries if it is fixing n floor MS brackets & accessories if it is fixing on wall labour, usage charges of machinery complete as per specificed.with regards to general guidelines of fire saf

code20 - Providing Water type- 9 Ltr -Stored Pressure Supply and installation of 9 Ltr Water type Fire Extinugisher, Stored Pressure Type, Pressur Gauge, Gross Weight 15.1kg. empty weight 6.1kg Can Height 615MM, Diameter 175 MM, Discharge Time less than 120 Sees, Controllable discharge mechanism (Squeeze grip with easy snap safety seal), Range minimum 6 Meters, applicable on Class A Fire, A Rating 3A, Can Construction Deep drawn & CO, Mig welded, Valve Construction: Forging & Machining, Internal Coating of Can : Epoxy Powder coating, External Coating of Can Epoxy Polyster Powder coating, Sheet metal thickness 2.OM M, lS 15683 and CE Approved. Years Warranty with instalert system with Superior quality EPDM Rubber Hosepipe etc including cost cost of supporting materials like MS stand & accessaries if it is fixing n floor MS brackets & accessories if it is fixing on wall labour, usage charges of machinery complete as per specifications complete

code21 - Providing Aqueous Film-Forming Foam - 9 Ltr Supply and installation of 9 Ltr Fire Extinugisher Aqueous Film Forming Foam Type, Stored Pressure Type, Pressure Gauge, Gross Weight 15.1Okg. empty weight 6.10kg Can Height 615 MM, Diameter 175 MM, Discharge Time less than 60 Sees, Controllable discharge mechanism Squeeze grip with easy snap safety seal Range minimum 6 Meters, applicable on Class A,8,CARating 13A, 8 Rating 558, Can Construction; Deep drawn & CO, Mig welded, Valve Construction: Forging & Machining, Internal Coating of Can : Epoxy Powder coating, External Coating of Can : Epoxy PoIyster Powder coating, Sheet metal thickness: 2.0MM, lSI and EN Approved, Helium Leak Detection Tested, 1 Years Warranty with instalert system with Superior quality EPDM Rubber Hosepipe etc including cost cost of supporting materials like MS stand & accessaries if it is fixing n floor MS brackets & accessories if it is fixing on wall,, labour, usage charges of machinerycomplete as per specifications complete

code22 - C02 4.5Kg Squeeze gripSupply, installation in position, testing and commissioning of 4.5Kg C0 Gas Type Fire Extinugisher, Trolley Mounted, 2 Easy Weight Management used Unused Mechanism, Squeeze Grip, Gross Weight 19.1 Kg. empty Weight 14.6 Kg. Can Height 860MM Diameter 140MM, Discharge Time less than13 Sees, Controllable discharge mechanism, Applicable on Class 8&C Fire, 8 Rating 138, Can Constuctin Hot spinning Forging, Valve Construction Forging & Machining, Internal Coating of Can Not Applicable, External coating of Can : Spray Painting, Sheet metal thickness 4.5M M lSI Approved 1Year Warranty. with instalert system with Superior quality EPDM Rubber Hosepipe etc including cost of materials, labour, usage charges of machinery complete as per specifications. complete

code23 - Singages for Walls/FloorsProvidings Escape Singage Photoluminescent rigid plastic, 2 mm thickness, Printed on High Quality glass paint with UV resistance, 5 years warranty, Material Used Non Radiocactive, non phosphorous, non toxic and lead free. Available in different types & sizes, Time after removing the light source in minutes 60 minutes, Luminescent intensity milicandelas per square meter mcd per sqm) : 30 mcd/sqm. Luminescent Intensity greater than 0.32 mcd/sqm, Period of Light Decay In Minutes 3100, including cost of materials, labour, usage charges of machinery complete as per specifications.

code24 - Supplying and erection of pressure switch suitable range for pump sets with fittings like unions colours reducers etc

code25 - Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

code26 - Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 40 mm nominal dia Pipes

code27 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg per m3 and minimum compressive strength of 4.00 N per mm2 conforming to IS2185 Part I 2005 and constructed with CM 1is to 4 as per IS 2572 2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.

code28 - Providing and laying in position Cement Concrete forall Super structures of building , Road works, Waterworks, Irrigation works & super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. IM20 Design Mix Using 20 mm and down size graded crushed coarse aggregates

code29 - Providing 20 mm cement plaster of mix 1is to 4 1 cement 4 fine sand to brick stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge.

code30 - Providing and fixing Steel work in built up tubular round, square or rectangular hollow tubes etc trusses etc including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge.

code31 - Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and includingcutting to size and shape wherever required as per the direction of Engineer in charge. 0.63 mm thick with zinc coating not less than 275 g per Sqm

code32 - Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset platesat the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge.

code33 - Supplying and installation and Commsiisioning of Compartmentalised Common controlled Panel board for booster pumps 3phase 440 volts

code34 - Supply installation and commssioning of RF Connectivity to provide High availiability for Compartmentalised Common controlled Panel from admin building as per specifications provising supplyiing and mainenacne of RF connectivity with Band Support Radio Must support 5.8GHz ,NLOS, nLOS operation Radio Must support NLOS,nLOS condition with iOFDM ,Throughput System should support maximum of 1.36 Gbps aggregate throughput,Channel BandwidthRadio must support 2 channels, each channel with 20, 40, and 80 MHz,SPECTRAL EFFICIENCY8.5 bps per Hz maximum,Channel SelectionFixed frequency or Dynamic Channel Selection DCS,Modulation MCS 0 to MCS 9 (BPSK to 256 QAM),Duplex SchemeTime Division Duplex TDDMultiple transmit/receive duty cyclesSplit frequency operation allows separate transmit and receive frequencies where allowed by regulation.Channel BondingSystem should support channel bonding ,Sensitivity 90 dBm ,Distance CoverageUp to 122 miles 200 km,VLAN Support VLAN support based on IEEE 802.1Q,SecurityAES 128 Encryption,Identity Based user account, Configurable password rules,BandwidthSystem should be able to configure symmetric & asymmetric bandwidth. Upload and download percentage should be user configurable,MIMOPhysical Layer 2X 2x2 MIMO Interfaces 1 Gigabit Ethern 1 SPF port IPv6 supportSystem must support IPv6 IPv4 Dual stack support Asymmetric non adjacent channel Bonding System should provide the flexibility for different band to configure different TX and RX frequency for master and slave radio Spectrum analyzer modeBuilt in Online Spectrum analyzer. Running spectrum should not affect the link performance Support for Dynamic Spectrum OptimizationSystem should support DSO Technology to deliver the hitless performance. There must not be any outage in case of Spectrum analyzer run INSTALLATIONBuilt in e alignment using GUI on Radio to assist in installation ManagementIPv6 IPv4 dual-stack management supportSNMPv2 and SNMPv3, https, WPA PSK2 Online spectrum analyzer (no impact on payload traffic) PACKET CLASSIFICATIONLayer 2 and Layer 3 IEEE 802.1p, Ethernet priority, VLAN ARQSystem should have the support of ARQ Ethernet Latency Latency should be below 10ms with 90 percentLoad condition 4-5 ms one direction without load QUALITY OF SERVICE3 Level of QoS MAX PACKET SIZE 1700 BytesAntennaypeIntegratedGPSsynchronizationSystem should support GPS synchronization technique to eliminate interference Operation Temp 40 degree centigrade to 55 degree centigrade Outdoor Including solar radiation Wind survivalMinimum 200 km per h ProtectionIP66 and IP67 ProtectionIP66 and IP67 Certificates5.x GHz FCC Part 15E RSS 247 Issue 2 EN 302 502 EN 301 893 Safety: UL60950-1 per 22; IEC60950 1 per22; EN60950 1.22 CSA C22.2 No. 60950-1 per 22 CB approval with all National Deviations EMC US Part 15B, Canada RSS-GEN, Europe EN 301 489 1 and 17 Supply and installation of gigabit suppressor Connectors- RJ 45 ,Protection mode: Line-to-line and line-to-ground,SURGE ARRESTOR TVS Diodes (Transient Voltage Suppression for longer operational life),SURGE CURRENT RATING, L-G, total 172A, 10/1000us RESPONSE TIME 5 nanoseconds typical,Mounting: 4.6 in. x 3.4 in. x 1.8 in. 118mm x 87.5mm x 46.5mm, Operating temperature: 40 degree F (-40 to plus140 degree F plus 60 degree centigrade or better,Humidity: 100 percent condensing,Ingress protection IP54 Dust and Water Intrusion Protection