Karnataka Slum Development Board Tender

KSRB 4-1.3 : Providing and laying in position plain cement concrete of Mix 1:4:8 with OPC@ 180kgs, with 40mm and down size graded granite metal coarse aggregates @0.85cum and fine aggregates @ 0.57cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 ems. thick, well compacted, in foundation, including cost of all materials, labour, HOM curing complete as per specifications. Specification No. KBS 4.1, 4.2 ---- With all lead & lift and as per directions of the Engineer in charge of the work.

KSRB 2-2.2 : Earthwork excavation by manual means for foundation of buildings, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in hard soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50 m. after breaking of clods complete as per specifications. specification. No. KBS 2.1(b) / 2.3.5 ---- With all lead & lift and as per directions of the Engineer in charge of the work.

KSRB 4.9.2 : Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and I or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM complete as per specifications. Specification No. KBS 4.6.3 - do- - TMT bars Fe 500 ---- With all lead & lift and as per directions of the Engineer in charge of the work.

KSRB13-9 : Providing and fixing to wall, ceiling and floor high density polyethylene pipes 6.00 kgf/sq.cm working pressure of outside diameter raising mains & exposed distribution pipes with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM and testing complete as per specifications. Specification No. KBS 13.2.15.2/13.9 - KSRB 13-8.9: do- 140 mm dia ---- With all lead & lift and as per directions of the Engineer in charge of the work.

KSRB13-64 : Providing and fixing in position brass ball valve high or low pressure with plastic float of approved quality nominal bore including cost of all materials, labour and HOM with all leads complete as per specifications. Specification No. KBS - KSRB13-6.4-3- do- 25 mm dia nominal ---- With all lead & lift and as per directions of the Engineer in charge of the work.

KSRB13-6.3 • Providing and fixing in position brass gate valve with C.l wheel of approved quality ( screwed end ) nominal bore including cost of all materials, labour and HOM with all leads complete as per specifications. Specification No.KBS 13.2.6/13.3 - KSRB13-6.3-3- do- 25 mm dia nominal bore ---- With all lead & lift and as per directions of the Engineer in charge of the work.

KSRRB M300-53. Construction of embankment with approved material Gravei/Murrum with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement Table 300-2 complete as per specifications, including cost of gravel/ murrum, watering charges & compaction by vibratory roller to 95% of modified proctors density. MORTH Specification No. 305 ---- With all lead & lift and as per directions of the Engineer in charge of the work.

KSRB13-9 : Providing and fixing to wall, ceiling and floor high density polyethylene pipes 6.00 kgf/sq.cm working pressure of outside diameter raising mains & exposed distribution pipes with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM and testing complete as per specifications. Specification No. KBS 13.2.15.2/13.9 - KSRB 13-8 9: do- 15 mm dia ---- With all lead & lift and as per directions of the Engineer in charge of the work.

KSRB13-6.3 • Providing and fixing in position brass gate valve with C.l wheel of approved quality ( screwed end ) nominal bore including cost of all materials, labour and HOM with all leads complete as per specifications. Specification No.KBS 13.2.6/13.3 - KSRB13-6.3-5- do- 40 mm dia nominal ---- With all lead & lift and as per directions of the Engineer in charge of the work.

KSRB13-6.3 • Providing and fixing in position brass gate valve with C.l wheel of approved quality ( screwed end ) nominal bore including cost of all materials, labour and HOM with all leads complete as per specifications. Specification No.KBS 13.2.6/13.3 - KSRB13-6.3-8- do- 80 mm dia nominal ---- With all lead & lift and as per directions of the Engineer in charge of the work.

KSRB 13-11 : Providing and placing on terrace, polyethylene water storage tanks as per IS12701 : 1996 with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM and testing complete as per specifications. (For 1000 litre capacity) Specification No.KBS 13.22 ---- With all lead & lift and as per directions of the Engineer in charge of the work.

Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work). - 25mm nominal OD Pipe ---- With all lead & lift and as per directions of the Engineer in charge of the work.

KSRB 12-8.1 : Constructing brick masonry inspection chamber for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar 1:5, C I cover withframe (light duty) internal dimensions, total weight of cover with frame to be not less than 38 kg ( weight of cover 23kg and weight of frame 15 kg) R. C. C. top slab with cement concrete M 15 with 20mm and downsize granite metal, foundation concrete M 5 with 40mm and downsize granite metal inside plastering 12mm thick with cement mortar 1:3, finish smooth with a floating coat of cement on walls and bed concrete complete as per standard design including cost of materials, labour charges, curing complete as per specifications. Specification No. KBS - do- 450x450mm and 450mm depth (clear inside dimension) for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar 1 5, C I cover withframe (light duty) 450x450mm ---- With all lead & lift and as per directions of the Engineer in charge of the work.

Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work). - 75mm nominal OD Pipe ---- With all lead & lift and as per directions of the Engineer in charge of the work.

KSRB 4-6.4 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttresses, plinth cills and string courses cost of all materials, labour complete as per specifications. Specification No. KBS 4.6.2 ---- With all lead & lift and as per directions of the Engineer in charge of the work.

Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work). - 40mm nominal OD Pipe ---- With all lead & lift and as per directions of the Engineer in charge of the work.

KSRB13-5 • Providing and fixing water meter with stop cock, jam nut, socket in G. I pipe line including cutting and threading the pipe and making long screws including cost of all materials, labour, HOM and testing complete as per specifications. Specification No.KBS 13.2.19/13.16 ---- With all lead & lift and as per directions of the Engineer in charge of the work.