Karnataka Power Corporation Limited Tender

EECM04 - Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) ---- In accordance with financial department circular No. Fd 417 EXP-12/2024, dated- 09.08.2024, bidders are requested to submit their financial quotes excluding GST.

EECM05 - Providing & fixing factory made PVC Door frame of size 50x47mm witha wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge ---- In accordance with financial department circular No. Fd 417 EXP-12/2024, dated- 09.08.2024, bidders are requested to submit their financial quotes excluding GST.

EECM06 - Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and15x15mm for top & bottom rails, covered with heat moulded PrelaminatedPVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles &5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail& bottom rail on either side & 5mm thick, 20mm wide cross PVC sheetas gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheetPrelaminated on either side fitted in the M.S. frame, Sealed tothe stiles& rails with PVC Designer beading on either side & joined togetherwith solvent cement adhesive etc., Complete as per manufacturersspecification & direction of Engineer-in-charge fixed to frames with 3nos of 75mm Aluminium hinges.with both side prelam ---- In accordance with financial department circular No. Fd 417 EXP-12/2024, dated- 09.08.2024, bidders are requested to submit their financial quotes excluding GST.

EECM07 - Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey color having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 44mm width x 40mmheight with reinforcement of 1mm thickness and Sash with overall size of 27mm X 53mm with UPVC honeycomb structure inside in lieu of GI reinforcement. Coextruded Glazing bead for fixing of glass shall be of size 9.5mm x 21.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with Crescent Locks. Wall thickness of frame & sash shall be of 2 mm.Maximum possible size- 1219mm x 1219mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- In accordance with financial department circular No. Fd 417 EXP-12/2024, dated- 09.08.2024, bidders are requested to submit their financial quotes excluding GST.

EECM08 - Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size-1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- In accordance with financial department circular No. Fd 417 EXP-12/2024, dated- 09.08.2024, bidders are requested to submit their financial quotes excluding GST.

EECM09 - Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge ---- In accordance with financial department circular No. Fd 417 EXP-12/2024, dated- 09.08.2024, bidders are requested to submit their financial quotes excluding GST.

EECM10 - Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life) ---- In accordance with financial department circular No. Fd 417 EXP-12/2024, dated- 09.08.2024, bidders are requested to submit their financial quotes excluding GST.

EECM11 - Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge ---- In accordance with financial department circular No. Fd 417 EXP-12/2024, dated- 09.08.2024, bidders are requested to submit their financial quotes excluding GST.

EECM12 - Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 L/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- In accordance with financial department circular No. Fd 417 EXP-12/2024, dated- 09.08.2024, bidders are requested to submit their financial quotes excluding GST.

EECM13 - Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- In accordance with financial department circular No. Fd 417 EXP-12/2024, dated- 09.08.2024, bidders are requested to submit their financial quotes excluding GST.

EECM14 - Painting with oil type wood preservative of approved brand and manufacture :New work (two coats) to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- In accordance with financial department circular No. Fd 417 EXP-12/2024, dated- 09.08.2024, bidders are requested to submit their financial quotes excluding GST.

EECM15 - Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- In accordance with financial department circular No. Fd 417 EXP-12/2024, dated- 09.08.2024, bidders are requested to submit their financial quotes excluding GST.

EECM16 - Providing and fixing chromium plated brass butt hinges withnecessary chromium plated brass screws etc. complete.125x70x4 mm (ordinary type) ---- In accordance with financial department circular No. Fd 417 EXP-12/2024, dated- 09.08.2024, bidders are requested to submit their financial quotes excluding GST.

EECM17 - Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge-SS Tower Bolts 250x10mm ---- In accordance with financial department circular No. Fd 417 EXP-12/2024, dated- 09.08.2024, bidders are requested to submit their financial quotes excluding GST.

EECM18 - Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge-SS Handles 200mm ---- In accordance with financial department circular No. Fd 417 EXP-12/2024, dated- 09.08.2024, bidders are requested to submit their financial quotes excluding GST.

EECM19 - Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. ---- In accordance with financial department circular No. Fd 417 EXP-12/2024, dated- 09.08.2024, bidders are requested to submit their financial quotes excluding GST.

EECM20 - Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge-SS Aldrop 16mm dia, 300mm ---- In accordance with financial department circular No. Fd 417 EXP-12/2024, dated- 09.08.2024, bidders are requested to submit their financial quotes excluding GST.