Karnataka Power Corporation Limited Tender

005 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Canal & Allied Works ---- In accordance with financial department circular No. Fd 417 EXP-12/2024, dated 09.08.2024, bidders are requested to submit their financial quotes excluding GST.

008 - Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- In accordance with financial department circular No. Fd 417 EXP-12/2024, dated 09.08.2024, bidders are requested to submit their financial quotes excluding GST.

014 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. ---- In accordance with financial department circular No. Fd 417 EXP-12/2024, dated 09.08.2024, bidders are requested to submit their financial quotes excluding GST.

013 - Providing 15mm thick (Avg) rough finished plaster with CM 1:3 polymer modified mortar on the exposed concrete surface (wherever spalling is observed) after surface preparation and inclusive of all materials, consumables, scaffoldings, labors, equipment hire charges, tools and tackels etc., complete and as directed by the engineer in charge ---- In accordance with financial department circular No. Fd 417 EXP-12/2024, dated 09.08.2024, bidders are requested to submit their financial quotes excluding GST.

010 - Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm ---- In accordance with financial department circular No. Fd 417 EXP-12/2024, dated 09.08.2024, bidders are requested to submit their financial quotes excluding GST.

003 - Providing and applying one coat of acrylic based, polymer modified cementatious compound and cement slurry in the proportion of 1:2 over the dismantled and beam concrete surface as slurry coat before plastering including cost of all materials, machinery, labour etc., complete with all lead and lifts and as directed by the Engineer in charge. ---- In accordance with financial department circular No. Fd 417 EXP-12/2024, dated 09.08.2024, bidders are requested to submit their financial quotes excluding GST.

001 - Removal of existing plaster/ spalled concrete/de-laminated cover concrete on RC column/beam by gentle chipping untill the hard concrete is exposed, followed by cleaning the surface with air and water jet, disposing off debris and including all materials, consumables, scaffoldings, labors, equipment hire charges, tools and tackels etc., complete and as directed by the engineer in charge. ---- In accordance with financial department circular No. Fd 417 EXP-12/2024, dated 09.08.2024, bidders are requested to submit their financial quotes excluding GST.

007 - Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix M25 concrete having the specified minimum characteristic compressive strength with OPC / PPC / PSC coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineer- in- Charge ---- In accordance with financial department circular No. Fd 417 EXP-12/2024, dated 09.08.2024, bidders are requested to submit their financial quotes excluding GST.

004 - Providing 20mm thick (Avg) CM 1:3 polymer modified mortar on the exposed concrete surface (wherever spalling is observed) after surface preparation and inclusive of all materials, consumables, scaffoldings, labors, equipment hire charges, tools and tackels etc., complete and as directed by the engineer in charge. ---- In accordance with financial department circular No. Fd 417 EXP-12/2024, dated 09.08.2024, bidders are requested to submit their financial quotes excluding GST.

002 - The exposed reinforcement bars shall be cleaned thoroughly to remove corrosion scales using buffing wheel and emery cloth. The exposed surface shall be washed with water jet followed by appplying two coats of anti-corrosive chemical of approved brand on cleaned rebars as per mfrs. specifications inclusive of all materials, consumables, scaffoldings, labors, equipment hire charges, tools and tackles etc., complete and as directed by the engineer in charge. ---- In accordance with financial department circular No. Fd 417 EXP-12/2024, dated 09.08.2024, bidders are requested to submit their financial quotes excluding GST.

012 - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- In accordance with financial department circular No. Fd 417 EXP-12/2024, dated 09.08.2024, bidders are requested to submit their financial quotes excluding GST.