Karnataka Industrial Areas Development Board Tender

code04 - Supply of Route and Joint Indicating Stones with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code05 - Supply of GI Pipe, 100 mm Dia for drain crossing, cable raising etc., with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code06 - Labour charges : Laying of cable in trench with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code07 - Making of cable terminations for 11KV class 3Cx240 Sqmm XLPE UG Cable with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code08 - Earth work excavation by manual means for drains, canals, waste weir, draft,approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.. (KPWD civil SR-2023-24, P-8 I- 1.4.1)

code09 - Fixing of Route & Joint Indicating Stones with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code10 - Laying of GI Pipe with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code11 - Laying of UG Cables byNormal Soil - 6” Bore (UG cable along with upto 5 Nos of 50/42 mm or 40/33 mm HDPE/PLB Pipe) with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code12 - Part-B : Providing HT Metering Cubicle & RMU : Supplying of 11 kV HT Metering cubicle of different CT Ratio, Both side cable entry type with 3 CT & 3 PT, With Transparent Cover TTB, with 30x8 mm Copper Busbar, Modem & 2 No of Meters for 3 Phase 4 Wire Metering without Load Break Switch (HT Metering Box Fabricated out of 3 mm MS Sheet duly epoxy powder coated) as per revised Specification with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code13 - Supplying of Load Break Switch with Panel with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code14 - Construction of platform with size stone, cement concert for erection of 500 kVA Transformer/Metering cubicle/Heavy Equipment. Construction of platform (1.5x1.5x1.2) Mtr in size stone, for erection of transformers/Heavy equipment including all materials, labour. Excavation of (1.5x1.5x1) Mtr pit for foundation providing and laying cement concrete 1:4:8 for foundation laid in 10 cm thick layers, well compacted curing etc., complete providing and construction of stone masonary 0.9 Mtr below ground level and 1.2 Mtr above ground level neatly hammer dressed in cement morter 1:6. Providing and Laying cement concrete slab 1.5x1.5x0.10 Mtr with cement concrete of 1:2:4 mix forming & cutting complete, providing pointing to stone masonary in cement morter 1:3 after racking joint & nisely lining curing etc., plastering the concrete surfaces in cement morter 1:4 including smooth randering curing etc., curing at every stages completely with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code15 - Supply of DP Structure using RCC Pole - 9 Mtr Long, 145 Kg WL with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code16 - Supply of 11 kV, 5 KN Polymeric Pin Insulator (24 mm Dia FRP Rod)

code17 - Supply of Guy Set Complete with No. 15 Strain Insulator & Concreting materials with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code18 - Supply of Caution/Danger Board with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code19 - Supplying Earthing materials pipe type for grounding (Single Electrode with accessories) with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code20 - Supply of 11 KV lightening Arrestors,Metal oxide, 9 kv, 5 ka with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code21 - Supplying of 11 kV, 400 Amps Double Break GOS with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code22 - Supplying of H-Frame for mounting GOS with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code23 - Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete. Work shall be carried out as per the instructions of Engineerin- charge of works as per the standard procedure with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code24 - Providing chain link fencing 50 mm size of 8 guage properly stretched between rectangular Poles and fixed with suitable bolts & nuts, the free ends shall be welded to the Pole and block pipe at top and bottom as required including cost of all materials, labour, lead and lifts, cutting, bending wherever necessary, wastage and lapping etc., complete as per the direction of the engineer incharge for work including two coats of approved quality paint over one coat of primer paint with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code25 - RMU 3 Way, (2OD + 1VL,) One Incomer + One Breakers + One outgoing, 350 MVA, 630 Amps with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code26 - Bed Concreting with CC 1:2:4 [M-15] Using 20mm Nominal size graded crushed coarse aggregates with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code27 - Foundation with CC 1:4:8 [M-15] Using 20mm Nominal size graded crushed coarse aggregates with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code28 - Providing Reinforecement TMT Fe 550/550 D with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code29 - Supplying of Frame of MS Channel 100x50 mm and MS angle 40x40x5 mm welding etc., with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code30 - Rod type earthing with 40 mm Dia, 3 Mtr long MS rod as per specification & drawing including digging of pit & fixing with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code31 - Lettering the RMU with enamel paint and also writing single line diagram of each panel, caution Board, Danger Board etc., including cost of Paint, Brush etc., with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code32 - Labour Charges : Erection of 11 kV HT Metering cubicle of different CT Ratio, Both side cable entry type with 3 CT & 3 PT, With Transparent Cover TTB, with 30x8 mm Copper Busbar, Modem & 2 No of Meters for 3 Phase 4 Wire Metering without Load Break Switch (HT Metering Box Fabricated out of 3 mm MS Sheet duly epoxy powder coated) as per revised Specification with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code33 - Erection of DP Structure using RCC Pole - 9 Mtr Long, 145 Kg WL with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code34 - Erection of Guy Set Complete with No. 15 Strain Insulator & Concreting materials with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code35 - Fixing of Guy concreting with Boulders, Mud & Sand As per Drawing No. BESCOM/GM/CP/7/dt: 24.10.07. (with out cement) with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code36 - Fixing of Caution/Danger Board with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code37 - Fxing of Earthing materials pipe type for grounding (Single Electrode with accessories) with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code38 - Fixing of 11 KV lightening Arrestors,Metal oxide, 9 kv, 5 ka with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code39 - Fixing of 11 kV, 400 Amps Double Break GOS with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code40 - Fixing of H-Frame for mounting GOS with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code41 - Earth Excavation for RMU Foundation depositing of earth on bank up to a lead of 50 Mtr and with a lift up to 1.5 Mtr with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code42 - Labour charges for Fixing foundation frame of MS channel 100x50 mm and MS angle 40x40x5 mm welding, fixing in concrete, aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from panel to panel etc., with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code43 - Part-C : Providing transformer : Supply Caution/Danger Board with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code44 - GI Pipe, 100 mm Dia for drain crossing, cable raising etc.,

code45 - Supply of 630 kVA, 11 kV/433 V, 3 phase Delta Star, Dyn11 : Supply of Auxiliary Transformer with copper windings & oil, cable termination type on both HT & LT outdoor type with off load tap changer in steps of 2.5 % with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code46 - Labour charges for erection of transformer & transformers accessories with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code47 - Supply of LT Distribution box for500KVA with 2 nos of MCCB with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code48 - Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/ manual reset facility suitable to mount on DIN rail/ flush mounting on panel board. with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code49 - Part-D: Providing 500KVA/400kw Diesel Generator set: Supplying, installing, testing and commissioning of DG set with Power rating as per std ref BS 5514/ISO 3046/ ISO 8528 & IS 1002/ISO 3046 Gen set specns. Engine: DG set are rated at 1500RPM & confirm to ISO 8528. radiator cooled, 4 stroke and multi cylinder, confirming to ISO 3046. The scope of supply includes: Ele starter motor12V DC Battery charging alter, Bosch fuel system with mechanical governor, A1 Class. Spin-on lube oil filter & dual fuel filter with water separator, Turbocharger, Charge air cooler, Silencer, Dry type air cleaner, Shutoff coil, Flywheel and flywheel housing, Safety for low lube oil pressure & high water temperature, Permissible overload of 10% for 1 hour in 12 Hr of oprn. Capacity of Fuel Tank: 8 hr of oprtn. Alter: is suitable for oprn at 1500 RPM, 415 V, 0.8 pf (lag) suitable for 50 Hz, 3 phase, 4 wire systems, conforming to IS/IEC 60034-1. The Alter is brush less type, screen protected, revolving field, self excited, self regulated through Mounting arrangement: mounted on a common MS fabricated base frame with AVM pads. AVR. shall have plus or minus 1.0% Volt regulation (max) in static conditions- IP: 23 protections insulation class F&H. Engine & alter mounted on MS base frame with AVM pads. Control Panel: is manufactured with 14/16 gauge CRCA sheet. It consists of PS0500 Controller, Al bus bars, Indicating lA for 'Load On' & 'Set Running', MCCB of suitable rating with overload & SC protections. Gen set Controller: microprocessor based Gen set monitoring & CS, manual & remote str/stp control, shutdown fault indication & LCD hour counter. The integration of all functions into a single C S provides best reliability & performance. This designed & tested to meet harsh environment. Features, Functions, protections 16 char x 2 line LCD display with LED Backlight O I. Fault history stored, Altr Data. Voltage (1 ph or 3 ph line to line & line to neutral voltage, Current (1 ph or 3 ph), kVA (3 ph & total), Frequency, Engine Data, Starting battery voltage, Engine running hrs, Engine Temp, Engine Oil Pres, Control includes Service adjustment & calibration of DG control functions, V, frequency selection, Configurable i/p & o/p setup, Meter calibration, Engine controls, Power Start operates on 12 VDC batt, Auto strt mode accepts signal from remote devices to automatically start the DG set. Engine Starting -The C S supports automatic engine starting, Primary & back up start disconnects are achieved by battery charging alter feedback or main alter o/p frequency. Controller provide time delay of 0-300 s to start after remote start signal & time delay of 0-600s to shut down after stop signal. Sleep mode to battery life. Engine Protective functions include, Configurable alarm output, Emergency stop, Low lube oil pressure warning & Shutdown, High engine water temp warning / Shutdown, Low coolant warning, Sensor failure indication, Weak battery warning, Alter Protective includes, High & Low AC volt shutdown, Under & Over freq shutdown/warning. Acoustic enclosure shall be made of 1.6 mm thick CRCA sheets. The walls of enclosure are insulated with fire retardant foam so to comply with the 75dBA at 1 m sound levels. features: Specially designed to meet stringent MOEF/CPCB norms of 75dBA @ 1 m at 75% load under freefield conditions, Two point lifting, optimum serviceability, Air inlet louvers spcly designed to operate at rated load on purpose CNC machines for consistency in quality & workmanship, Powder coated for long lasting & superior finish, With UV resistant powder coating, can withst & extreme environment, Special hardware for longer life, Insulation meets exacting IS 8183 specs for best sound attenuation, Fluid drains for lube oil & fuel, Fuel filling point inside the enclosure. The complete set adhere to NEC, NBC 2016, IEC, CPWD specs PCB norms & KSGEI Acts & Rules 500 KVA / 400 kw with all lead & lifts complete as per spec & direction of Engineer in charge.

code50 - Part-E : Providing 1.1 KV LT UG Cable From DTC to Control Panel : Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured 3.5c X 240 Sq MM LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code51 - Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable 3.5 x 225/240/300 with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code52 - Labour Charges : Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 120 to 240 Sqmm with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code53 - Making of Heat shrinkable Type Terminations 120 to 240 Sqmm with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code54 - Supply of 425HP FCMA Soft starter panel: MS Enclosure Indoor Type made out of 14G CRCA Sheet steel free standing type complete with pretretment process with Powder coating , fitted with the following : 800Amps, 3P Contactor for Run, 500Amps, 3P Contactor for Start, 425HP Reactor , RYB Indication Lamp, Indication Lamp, Push Buttons, Control MCB ,Control Relay ,Digital Voltmeter, Digital Ammeter , 3Phase CT Oprated Motor Protection Relay, Under/Over voltage relay - 415V VPG D1 - 415V AC ,Phase failure relay with Dry run - 415V D2 VMR1, Digital Status Relay,Aux. contactor with add on blocks 220V,On delay Timer ,Hooter ,Thermostat- 1NC,415 / 230V, Control Transformer 1KVA ,800/5A CL. 1 10VA CTS, 800A TP+N Copper bus bars with heat shrinking sleeves, fitted with non higroscopic busbar support, with complete accessories with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code55 - Supply of L.T Motor control panel Board with 1250Amps Kiosak suitable for pumpo with motor: MS Enclosure Indoor Type made out of 14G CRCA Sheet steel free standing type complete with pretretment process with Powder coating , fitted with the following : EB INCOMER 1 From Transformer 1 1250A 4P MDO 50kA ACB with O/c, S/c, Releases + Shunt , On/off /Trip Indication lamp ,6A SP MCB RYB Indication Lamp, MDM EM6436H with RS -485 ELR with CBCT 1-10A, OverCurrent / Earth fault relay, 1250/5A CL.1 5P 10 10VA CTS - METERING, 1250/5A CL.1 10VA CTS - APFC 1250/5A CL.1 10VA CTS - METERING, 50KA type-2 SPD with MCB Isolator 63A 4P , EB INCOMER 2 From Transformer 2: 1250A 4P MDO 50kA ACB with O/c, S/c, Releases + Shunt , On/off /Trip Indication lamp ,6A SP MCB RYB Indication Lamp, MDM EM6436H with RS -485 ELR with CBCT 1-10A, 3Phase 2 OverCurrent /1 Earth fault relay, 1250/5A CL.1 5P 10 10VA CTS - METERING, 1250/5A CL.1 10VA CTS - APFC 1250/5A CL.1 10VA CTS - METERING, 50KA type-2 SPD with MCB Isolator 63A 4P , BUSCOUPLER- 1250A 4P MDO 50kA ACB with O/c, S/c, Releases ,On/off /Trip Indication lamp ,6A SP MCB, Plug in relay with base , 3Lock - 2Key Outgoings: 1000A TP+N MDO 50KA ACB with O/c, S/c, Releases MDM EM6436H RS 485 CL1 1000/5A CL. 1 10VA CTS 6A SP MCB, 3Lock - 2Key , 63A TP 25kA MCCB with O/c, S/c, Releases+Rhom+Spreaders-To Lighting , SUB-INCOMING FOR APFC- 175KVAR 630A TP 36kA MCCB with O/c, S/c, Releases+Rhom+Spreaders On/off /Trip Indication lamp , 6A SP MCB, RYB Indication Lamp, 6A SP MCB, Auto manual Selector Switch, 6Stage APFC Relay, Aux. contactor with add on blocks 220V, Timer-220V AC, On/Off ILPB 6" exhaust fan with grill, 125A 25KA TP TM based MCCB with O/C,S/C Releases ,80A 25KA TP TM based MCCB with O/C,S/C Releases, Duty Conatctor , 50kVAR-2, 25kVAR -3, Capacitors, 440V AC Phase Cap SHD, 25kVAR -7, 1250A TP+N Al. bus bars with heat shrinking sleeves, fitted with non higroscopic busbar support with Complete accessories with all lead and lifts complete as per specification & direction of Engineer in charge of the work.

code56 - Supply of 1250 AMPS KIOSK: MS Enclosure OUTDOOR TYPE made out of 14G CRCA Sheet steel free standing type complete with pretretment process with polypropylene Powder coating , fitted with the following : 1250A TP MDO 50kA ACB with O/c, S/c, Releases , 1NO, On/off /Trip Indication lamp, RYB Phase Indication Lamp, 6A SP MCB for control circuit, 1250A TP+N Al. bus bars with heat shrinking sleeves, fitted with non higroscopic busbar support with complete accessories with all lead and lifts complete as per specification & direction of Engineer in charge of the work.