Karnataka Industrial Areas Development Board Tender

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers with all lead and lifts complete as per specifications and directions of engineer in charge of the work. 100 Amps

Laying of UG cables by Trench less technology by adopting horizontal boring & drawing of cable including preparation at site without HDPE pipe Normal soil 5” bore size with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Providing and laying in position plain cement concrete of mix 1:4:8 with OPC cement@ 180 kgs with 40mm and down size graded granite metal coarse aggregates @ 0.85cum and fine aggregates @0.57cum machine mixed,concrete laid in layers not exceeding 15cm thick well compacted in foundation, plinth and cills,including cost of materials,labour,HOM of machinery curing with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supplying & Fixing minature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF energy cross-3 with short circuit breaking capacity of 10 K and complete wiring as required confirming to IEC 60898 with all lead and lifts complete as per specifications and directions of engineer in charge of the work. 6-32 Amps TPN

Supply and fixing polished wood board made of not less than15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws with all lead and lifts complete as per specifications and directions of engineer in charge of the work. 20”X20”X2.5"

Fabricating, supplying and erection of …Mtrs long hot dip Galvanized Octagonal pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrange ments , including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/sec for pole in single section and single joint welded as per IS 9595/IS 10178AWS having dimensionswith 3mm thick, suitable base plate and 4Nos of ..... long J bolts along with template and the pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153 etc., excluding foundation) as per drawing appended with all lead and lifts complete as per specifications and directions of engineer in charge of the work. 8 meters - Top 70mm and bottom 135mm dia

Providing and laying in position plain cement cocrente of mix M15 (1:2:4) with cement @ 240 Kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.878 cum and fine aggregtes @ 0.459 cum machine mixed concrete laid in layers not exceeding 15cms, thick well compacted, in foundation and plinth and cills, including cost of all materials, labour, HOM of machinery, curing with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supplying and fixing micro processor based electronic timer (without contactor, in mounting using necessary bolts, nuts and washers etc.,) 3 – 120 Setting with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Fabricating, supplying and mounting MS box made out 18 SWG suitable for floor/wall mounting fully weather proof with provision for better heat dissipation , provided with hinged front cover equipped with tamper proof looking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7 tanks treatment with powder coated paint and finally finished with approved colour etc., with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Providing Mild steel reinforcement for R.C.C work including straightening, cutting, bending, hooking ,placing in position,lapping and/or welding whereever required,tying with binding wire and anchoring to the adjoining members wherever necessary with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supplying & fixing of LT AC 3 Phase 4 wire, 5-30A DLMS complaint Energy Meter, Class – 1.0 Accuracy with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 with all lead and lifts complete as per specifications and directions of engineer in charge of the work. 4 core 16 sqmm

Supplying and fixing angle iron frame work fabricated out of MS angle iron..and MS flat…with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint with all lead and lifts complete as per specifications and directions of engineer in charge of the work. 50x50x6mm

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the size 25 sqmm long barrel with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1KV with all lead and lifts complete as per specifications and directions of engineer in charge of the work. 50mm

Earth work excavations and refilling for cable trench of 0.5 to 0.75 Mtr width and depth upto 1 Mtr including total pits, depositing on bank upto a lead of 50 Mtr supplying and displaying necessary danger boards and lighting using sight rails and sign boards at every 100mtrs wherever necessary as directed with all lead and lifts complete as per specifications and directions of engineer in charge of the work. In soil (ordinary)

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartm ent comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT > 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor >0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .120 W System Power consump tion. LED fficiency>130lm/w, nominal CRI >75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001: 2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source with all lead and lifts complete as per specifications and directions of engineer in charge of the work. 90watts LED

Supplying and fixing L.T. cast iron pot heads suitable for 1.1KV class UG cable filled with necessary bitumen/ insulating compound with terminals, clamps, bolts, nuts and washers etc., with all lead and lifts complete as per specifications and directions of engineer in charge of the work. 25Sqmm

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit.. The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. the connection from the pipe to the conduit etc., is to be established through GI wire of size as per ISI specification 7.3.3 of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc, the pipe shall have 16 through holes of 12mm dia with all lead and lifts complete as per specifications and directions of engineer in charge of the work.

Operation and Maintenance of LED source, cost of men and materials as directed by the Engineer in-charge. Here the work includes supply and replacement of all components including drivers, front protection cover, aluminium housing body, complete for the street light as per the specification mentioned below. Above said work to be attended by the contractor at his cost only. LED Streetlight with pressure die cast aluminium housing body with optimal heat sink for better thermal dissipation. Diffuser with injection moulded and is made of polycarbonate material with high transmission index, delivering superior light output. Rated life burning Hrs. 50000 hr @ Lumen Maintenance of 70%. CCT > 5500 K, IP 66 optical and electrical compartment and impact resistance of complete luminare > IK 08. Power Factor > 0.9 with mains current should not be greater than 0.1 A to 0.7 A & Surge Protection - Min 4 KV along with over voltage / overload, short circuit / miswiring protection. Compatible for pole mounting with outer dia of 40 mm to 50 mm. Universal Voltage driver to operate wide voltage range from 100 V to 270 V 50 / 60 Hz application. Over load and Short circuit protection ensures reliable operation in spite of problem in output side. Compliance to IS 10322 / IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access streetlight with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools with all lead and lifts complete as per specifications and directions of engineer in charge of the work. 150W LED street light. (Rate per fixture/year)

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring wih specified IS-694 confirming to latest amendments with all lead and lifts complete as per specifications and directions of engineer in charge of the work. 2.5 Sqmm

Supplying and fixing of Hot Dip galvanized M.S Bracket suitable for out door luninaries and mounted on Octogonal pole using necessary bolts, and nuts etc., with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Single arm bracket with 1500 mm standard 40/50mm dia

Supplying and fixing of Hot Dip galvanized M.S Bracket suitable for out door luninaries and mounted on Octogonal pole using necessary bolts, and nuts etc., with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Double arm bracket with 1500 mm standard 40/50mm dia