Kannada University Tender

vg33 - Supplying and fixing miniature circuit breakers on exising MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OPP, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required. 50-63A p (13 OF 1)

wq22 - Wiring for lighting /power circuit using one of pvc insulated 1100v grade stranced alluminium wire single core in open or concealed systme of wiring 2.5 sqmm pwd sr p.31c

dw23 - Supplying and drawing flexible multi core cable manufactured with electolytic grade flexible copper with low conductor conforming to is 8130-1984 and virgin) pvc insulation sheathed suitalbe for working voltage up to 1100 volts as per is 694 19190-6c x 2.5 sqmm

wq22 - Fixing of halogen/metal hallied/SVL/ Led flod light fitting over existing pole/wall celing including clamp bolts nuts and wiring using suitable capacity wires p (45 of 47)

544 - Supply of LEDstreet light luminaire with pressure die cast aluminium housingbody for optimal termal dissipation Lamp compartment comprising of anti glare clear diffuser with injection moulded polycarbonate materilal, delivering superior light output. Rated life burning HTS 50000hR @lumen Mantenance of 70% masimum

led23 - Supplying LED flood light luminiar with pressure dyecast alluminium Housing body for opitimal thurmal disspipation Lamp compartment comprising of anti glare clear diffuser with injection moulded polycarbonate material, delivering superior light output. Rated life burning HTS 50000 hR @ lumen Mantance of 70% maximum light intensity should be between 60 degreees to 70 degree

mvs25 - Supplying of and fixing of 25mm dia A GI pipie bracket up to 2 mtr long terminated with a reducing coilar of 40 25mm to which extra pipe of 175 mm length is fixed for fixing MV/SV/MH/FTL Street light fitting of all capacities on rail /RCC/WALL TUBLEAR Pole using suitable clamp s nuts and wiring using suitable capacity wire p (79)

ewx22 - Earth work excavation by manual means for foundation of building water supply saiitary linies and electrical conduits etc either in pits or trenches 1.5m and above in width in soll not exceeding 1.5 m in depth including dressing the bottom and sides of pits and trenches stacking the excaveted soll clear from edges of excavation with lead up to 50 m including breaking of clods complete as per specification kbs 2.1 (a)/2.3.5 skrb 2-2.2; -do-in hard soil no kbs 2.1 (b)2.3.5 (pwd sr 18- 19 itm no. 204 page no.6

sd32 - Supplying, fixing, wiring, earth electrode for grounding using Copper plate 1' x 1, funnel, conduits, I.C., cutouts and oter equipment on the meter board using 40mm dia 2.90mm thick GI pipe 2.00 Mtr long burined in apit. The pit should be filled with equal proportion of salt and charcoal 150 mm around the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe whall have 16 through holes of 122 mm dia. p(40)

gt22 - Supplying of 1.1 KV LT UG Cable having aluminium conductor PVC insulated extruted inner sheathed galvanised steel strip 9except 2C X10 SQ MM Wire armoured ) confirming to IS 3975 -1990 ( no of strip indicated in GTP & Extruded PVC outer sheathed armoured cable with specified IS -1554 Part 1,1988 & confirming to GTP of GROUP -P (9 OF27) IT 32

suo55 - Fabricating supplying Erection Testing and commissioning of 12mtr/12.5 mtr long polygon high mast with single /multiple telescopic sections having (minimum overlap distance of 1.5 time of top section) thickness as per BSEN 10025 Grand S 355JO /ASTMAS572-50 Steel sheet plate for shift suitable to withstand a wind velocity of 47m /sec as per it 2062/ASTMA572-50 The mast shell be galvanized in single hot dip as per the BSEN ISO 1461/ASTM A 123 With an average 70 micrones as per is 2629 and welded as per BS 5135 Single L - Seam joint the mast shell have 2 Way head frame with die cast LM -6 Pulleyes stainless steel axle phosphonus bronze bearing bush press fitted with seperate guides for 2 runs pf 5mm dia stainless steel wire rope of AISI 304 grade 7/19 -core (Factor of safety as per TR no -7) 2.5 sqmmEPR insulated PCP sheathed trailing power cable housed inside bottom shaft of mast with door having locked arrangement the mast shall have manual/ lower tool (suitable provide above 15 mtr mast) the mast shall have lantern of 2 segments suitable dia with max load carrying capacity as per is 1239 the mast shell be erected on existing RCC footing the mast shell be supply

pa44 - Providing and laying in position reinforced cement concrete for all foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant is code machine mixed with super plasticizers laid in finished layers well compacted using needle vibrator including all leades and lifts cost of all materials quality confirming to the requirement of relevant is codes labour usage charges of machinery curing and all the others appurtnances required to complete the work as per the technical specification (the cost of steel rainforcement and foroum of work to be paid sarpetely) m20 Design mix using 20mm nominal size graded crushed coarse aggregates (PWD vol.sr 2021-22 page 15 1 no. 2.2.1.1)

wd43 - Supplying and fixing of angle iron frame work fabricated out of ms angle iron- and ms flat-with bolts washers etc., and painted with 2 coats redoxide and then two coats approved paint 40 x 40x6mm p(150F1)

ac23 - Supplying and fixing of 4 pole power contractor with no/nc contracts on existing wood/pannel board using necessary bolts nuts washer and wiring etc complete with AC rating and as per IS 1947-60 to 70 Amps (p 111)5.13.3

te22 - Cable termination ,fixing of lugs,wiring of street light MCB fixing with all accessories

lc22 - Laying of cable in existing trench GI pipe /Stoneware pipe /on wall /on pole/stone ware/rcc hume pipe using wooden /Aluminium rollers as directed by the departemental staff 2.5 to 25 sqmm as per required P 99 of 14)

hg45fb43 - Fabracating supplying and mounting MS Box made out- SWG Suitable for floor/wall mounting fully weather proof with provision for battery heat disslpation provided with hinged front cover equipped with tamper proof locking arrangments with suitable size clamps tith necessary cable entry pipe with gland and box should be finished with 7 tanks treatment with powder coated paint and finally finished with approved colour etc., complete-14 swg pwd SR

wq31 - Supplying and fixing of solar lux level street light control switch single phase including suitalbe capacity contractor-3kw

se43 - Fabricating supplying and errection 9 mtr long, hot dip galvanized octagonal pole with BSEB 10025 grade S 355 HI steel plate for shaft IS 2062 for base plate with door opening arrangments including suitable boards bakelite sheet and mcb as per is specification suitable to withstand the wind speed of 47 m/sec. for 9 mtr pole in single section and single joint welded as per is 9595/is 10178 AWS having dimensions bottom 155nn top 70mm with 3 mm thick suitable base plate and 4 no s of 9 mtr long j bolt along with template and pole shall be hot dip galvanized in single dipping with not less than 65 micron as per AS-12 and 153 etc.excluding foundation as per drawing appended p (7 of 47)

ste32 - Providing and laying in position plain cement concrets of levelling course for all works in foundation . The granite/trap/basalt crushed graded cares aggreagated and fine aggrates as per the relevant IS codes machininee mixed laid in layer not exceeding 150 mm thickness well compacted using plate vibrator including all lead and lifts cost of all materials of quality labour usage charges of machiners curing and all the other appurtenances required to complete the work as per the technical specification (the cost of steel reniforcement and form work shall be paid seperately) mix 1:4:8 (M5) using 40 mm nominal size graded crushed coarse aggregates 2.1.1 Mix 1.5.10 using 40 mm (pwd dsr p (15) 1 no. 2.1.2

ms22 - MISELLANEOUS EXPENCESS

mm12 - Earth work excavation for pipe line /cable by manual means up to 600mm trench width as per the drawing and technical specification including setting out shoring strutting barricading caution lights removal of stumps and other deleterious matter including drressing of excavated surface ,disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radious of 50m filling available excavated earth (excluding rock) in trenches plinth sides of foundations etc. in layer nor exceeding 20 cm in depth condolidating each deposited layer by ramming and watring and lift upto 1.5 m including cost of labour ,tools, usage & other appurtenances required to complete the work PWD CIL CSR 1350x0.3x0.6