Gulbarga University Tender

Dismantling cement concrete flooring or plain cement concrete work including removing and conveying the debris to distance upto 200m (within average thickness of 15 cms). including cost of materials, labour, curing complete as per specifications

Easing of window shutters of door including cost of materials, labour, curing complete as per specifications

Easing of window shutters. including cost of materials, labour, curing complete as per Specification

Removing of existing old sanitary and plumbing pipelines, stacking and disposing it with all cost and conveyance labour and lift, loading and unloading, transportation charges and all other includental charges etc., complete as per specification and directions of the Engineer-in-charge of the work. including cost of all materials, labour complete as per specificaiton. Specification

Dismantling the tile work in floor and roof laid in cement or surki mortar including stacking the materials with in 50 m lead of tiles thickness 10mm to 25mm. Including cost of materials, labour, HOM complete as per specifications. including cost of all materials, labour complete as per specificaiton.

Providing skirting, dadoing, rises of steps with colour glazed tiles on 10mm thick cement plaster 1:3 and jointed with white cement slurry over rough plaster surface ( excluding cost of rough plastered surface which should be measured and paid separately ) using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications.

Providing rough cement plastering 15mm thick in single coat with cement mortar 1:4 to brick masonry for base of dadooing works with sand of approved quality, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.

Providing flooring with 20mm thick polished Cadapa slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab.including cost of materials, labour, curing, polishing complete as per specifications.

Providing Ceramic tiles of approved make,shade and size for flooring, treads qf steps and landings laid on a bed of 12mm thick, cement mortar 1:3 mix, flush pointing with white cement using colour pigment, including cost of materials, labour, curing, complete as per specifications.

Providing and constructing burnt brick masonry for basement and superstructure with approved quality of non-modular bricks of standard size of class designation 3.5 Newton per sqm with cement mortar 1:6 including cost of materials, labour charges, scaffolding, curing complete as per specifications.

Providing and fixing while vitreous china clay, water closet Orissa pattern of size 580 x 440mm with integral type footrests, 100mm S or P trap, 10 litre low level, P.V.C flushing cistern ( all are approved make ) with fittings, C.I / M.S brackets, 32mm diameter flush pipe fittings and clamps, overflow arrangements with special and 25mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications.

Providing and fixing white vitreous china clay, water closet European type {Pedestal type, P-trap ) with black solid plastic seat and Hd, CP brass hinges, rubber buffers. 10 litre low level, P.V.C flushing cistern (all are approved make) with fittings, C.I / M.S brackets, 40mm diameter flush bend with fittings and clamps, overflow arrangements with special and 25mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications.

Providing and fixing white vitreous china clay, flat back or half stall urinal basin of size 580x380x350mm in the range of two with 7.5 litres P.V.C automatic flushing cistern, C.I / M.S brackets, standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps, C.I. trap with outlet grating and other couplings in C.P brass painting of fittings and brackets, cutting and making good the wall and" floor wherever required, including cost of materials, labour complete as per specifications.

Providing and fixing white vitreous china clay, flat back wash basin size 630x450mm with a pair of 15mm C.P brass pillar taps with C.I /M.S brackets, 32 mm C.P. brass waste of standard pattern, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials. labour complete as per specifications

Providing and fixing C.P. brass towel rail 740mm length, 20mm dia with C.P brackets, fixed to wooden cleats with C.P. brass screws including cost of materials, labour complete as per specifications.

Providing and fixing in position brass bib cock of approved quality 15mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications.

Providing and fixing 600x450mm bevel Lead edge mirror of superior glass with 6mm hard board backing and fixed to wooden deals with C.P screws, washers, including cost of materials, labour complete as per specifications.

Providtng and fixing gun metal wheel valve conforming to IS specification of approved make as per directions including all lead and lift etc., complete. cost of materials, labour, complete as per specifications.

Providing and fixing in position brass stop cock of approved quality 20mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications.

Providing and fixing CI Nahani trap of approved make conforming to ISI specifications and construction of Cistern in M-15 as per directions (Rate is inclusive of cost of materials and fixtures and conveyance of materials to work spot)as per specifications.

Providing and fixing 7.5 cms to 15.00 cms dia NP grating 100 mm dia including cost of materials, labour complete as per specifications.

SOLID PANEL PVC DOOR SHUTTER Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm fro styles and 15xl5mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form styles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the styles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 m.m Aluminium hinges including cost of all materials, labour and HOM of equipments with all leads complete as per specifications.

Providing and fixing factory made single leafl rigid GRP Sandwich composite door shutter of 32mm thick, laminated with two GRP skins with wood grain finish, fabricated using U.V-stabilized Isopthalic Gelcoat and on layer of 450 gsm E-G!ass Chopped strand Mat (CSM), impregnated with orthopthalicpofyster resin. The thickness of the skins shall not be less than 1.5mm. Expanded Polystyrene (EPS) structural foam panel of29mrn thickness and a density of 20 K.g/m3 shall be used as core material. Wooden reinforcements made of Seasoned Salwood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fixing the metal fittings such as tower bolts, aldrops, handles, etc, shall be provided, A structural adhesive compatible with EPS foam shall be used for bonding the core material, the Salwood reinforcement and the skins. The material and process for manufacturing the door shutters shall confirm to RV/TIFAC Composites Design centre Standards and specifications and the door shutters tested in confiramation to IS 4020-1994. The finish of shutter will be plain colour White/Ivory/Beige/Light Grey or any other colour using high quality pigments. Exclusing cost of fixtures and inclusive of supply of shutters to respective work spot, including cost of all materials, labour and HOM of equipments with all leads complete as per specifications.

Providing and applying painting in two coats with plastic emulsion paint of approved brand on wall surface to give an even approved shade after throughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications. including cost of all materials, labour., transport charges, HOM of complete as per specifications.

Providing full nosing for 20mm thick granite slab using required machinery including cost and conveyance of all materials, labour for all items of work, HOM of equipment etc., complete including cost of materials, labour, curing, polishing complete as per specifications.

Providing and applying painting Two coat ( excluding priming coat) on new wood surface and / or wood based surface with enamel paint to give an even shade after cleaning the surface of all dirt, dust and foreign matter, sand papering including cost ofmaterials, labour, complete as per specifications. including cost and conveyance of all materials, labour for all items of work, HOM of equipment etc., complete as per specification

Providing and laying in position plain cement concrete of Mix 1:3:6 with OPC @ 220kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.56cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, wet! compacted, in foundation,plinth and cills, including cost of all materials, labour, HOM of machinery, curing complete as per specifications.

Providing and fixing M.S.grill work for windows and ventilators weighing using M.S. flats, or M.S. square rods, or combination of M.S. flats and square rods as per approved design, drawing including cutting steel sections and welding the same to required pattern with a coat of red lead primer, cost of materials, fixtures, labour including cost of materials, labour complete as per specifications

Providing and fixing in position anodized aluminium windows and ventilators as per approved drawings with sliding shutters using double track window frame section of size 61.85x31,75mm. with 1.2mm thick, bottom section weight 0.695 kg/m, sides and top sections 1.3 mm. thick weight 0-659 kg/m; and shutter comprising top and bottom section of size 4Qmmx 18mm. 1.25mm thick 0.417 kg./m: shutter outer side 40mmx 18mm, 1.25mm.thick weight 0.417 kg/m, shutter interlock section 40mmx26.7mm, 1.1 mm thick, weight 0.469 kg/m. the shutters mounted on nylon rollers with approved quality of fixtures such as aluminium handles tower bolts etc.; and providing and fixing 5.5mm. thick plain glass for shutters fitted with rubber beading aluminium sections anodised 12 to 15 microns, including cutting to required length, joints mitred subdividing the frame tenonned and rivetted in the assembled frame stiffened with end clips at comers angles etc., and fixed to the walls, lintels, floor bcams/cills as the case may be with necessary steel screws, raul plugs, or teak woodgatties including cutting masonry or concrete and making good the original surface using cement mortar, aluminium sections pretreated for removal \of any including cost of materials, labour charges, curing complete as per specifications

Constructing brick masonry inspection chamber 455x61 Omm. and 450mm depth. (clear inside dimension ) for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar 1:5, C.I cover with frame (light duty)455x610mm intemal dimensions, total weight of cover with frame to be not less than 38 kg ( weight of cover 23kg and weight of frame 15 kg ) R.C.C. top slab with cement concrete 1:2:4 mix 20mm and downsize granite metal. foundation concrete 1:5:10 with 40mm and downsize granite metal inside plastering 12mm thick with cement mortar 1:3, finish smooth with a floating coat of cement on walls and bed concrete complete as per standard design 600x600mm and 450mm depth (Clear inside dimention) for single pipe line, using table moulded non modular bricks of class designation 50 in cement mortor 1:5, CI cover with frame (Light Duty) 600x600mm. including cost of all materials, labour charges, HOM and testing complete as per specifications.

Constructing brick masonry circular type manhole 0.91 m internal dia at bottom 0.91m deep and 0.56m diaat top with table molded non-modular bricks of 50 class designation 50 in cement mortar 1:4, inside cement plastered 12mm thick with cement mortar 1:3, finished with a floating coat of neat cement, foundation concrete 1:3:6 mix using 40mm and downsize granite metal and making necessary channel in cement concrete 1:2:4 mix with 20mm and downsize granite metal finished with a floating coat of neat cement, with S.F.R.C. cover and frame { heavy duly. HD-20 grade designation) 560mm internal diametrc confirming IS : 12592. total weight cover and frame to be not less than 182 kg, fixed in cement concrete 1:2:4, 20mm and downsize broken granite metal, providing and removing centering, shuttering including cost of materials. labour charges, HOM of machineries complete as per specifications. (Excavation, footrests and 12mm thick cement plaster on the external surface shall be paid separately) Specification

Providing and Fixing chorinited poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fottings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints.including cost of all materials, labour charges, HOM and testing complete as per specifications.

Providing and fixing to wall, ceiling and floor high density polyethylene pipes 6.00 kgf/sq.cm working pressure 90mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications.

Providing and fixing to wall, ceiling and floor unplasticised PVC 6.00kgs/sqcm working pressure with pipe fittings,wall clips etc. and making good the wall ceiling and floor for sanitary pipelines including cost of all materials, labour charges, HOM and testing complete as per specifications.

Providing and fixing to wall, ceiling and floor unplasticised PVC 6.00kgs/sqcm working pressure with pipe fittings,wall clips etc. and making good the wall ceiling and floor for sanitary pipelines including cost of all materials, labour charges, HOM and testing complete as per specifications.

Earthwork excavation by manual means for foundation of buildings, water supply, sanitary lines and electrical conduits either in pits or in irenches 1.5m and above in width, in ordinary soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50 m. after breaking of clods complete as per specification.

Refilling available earth around pipe lines, cables in layers not exceeding 20cms in depth, compacting each deposited layer by ramming after watering with lead upto 50m. and lift upto 1,5 m. including cost of alt labour complete as per specifications

Providing I5mm thick cement plaster in single coat with cement mortar to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. (DSR2018-19 It. No. 15.13 Pg No. 115) Cemet motor 1:4