Rural Water Supply And Sanitation Department Tender
... More
The RWSS has issued a formal invitation for competitive bids for the Rural Water Supply And Sanitation Department project, for Providing Fhtcs To 1036 Households In Gorebal Habitation Of Gorebal Village, Sindhanur Taluka In Raichur District Through Single Village Scheme To Gorebal Village In Raichur District (55 Lpcd) in Raichur, Karnataka, with an estimated contract value of Rs. 1,51,32,678. The bid opening date for this tender is 22-02-2021 and the last date for bid submission is 06-03-2021. Interested bidders for Rural Water Supply And Sanitation Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
RWSSD/2020-21/WS/WORK_INDENT32746Bid Award Id
ViewTender No
RWSSD/2020-21/WS/WORK_INDENT32746Tender Authority
Rural Water Supply And Sanitation Department ViewPurchaser Address
-Website
http://eproc.karnataka.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Earth work excavatoin for water Supply & Sanitary lines, Electrical conduits either in pits or pipe line trenches (upto 600mm Trench width) as per drawing and technical specification, including setting out, construction of shoring, strutting, barricading, danger lighting, bracing, using sight rails & boning rods at every 100 mm whevere necessary removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench, including backfilling the excavated earth to the extent required and utilising the remaining available excavated earth locally for the work. in the following strata classifications by Mechanical Means In Ordinary soil etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
517
-
70570.5
... More
Providing and laying in position plain cement concrete of grade M 10 with OPC cement @ 220kgs, with 40mm and down size graded granite metal coarse aggregates @0.892cum and fine aggregtes @ 0.465cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation including cost of all materials, labour, HOM of machinery, curing etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
0.43
-
2385.88
... More
Providing and finishing external walls in two coats with waterproof cement paint of approved brand and shade to give an even shade after throughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
60.37
-
6465.63
... More
-do- 75 mm dia 6 KSC PVC
847
-
129591
... More
-do-100 mm dia
2
-
21676
... More
Providing and fixing water meter with stop cock, jam nut, socket in G. I pipe line including cutting and threading the pipe and making long screws including cost of all materials, labour, HOM and testing etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
1036
-
1367520
... More
Providing and laying reinforced cement concrete pipe 300mm dia NP3 for culverts including pointing ends, and fixing collars with cement mortar 1:2 including cost of all materials, labour, curing complete as per specifications. etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
20
-
30640
... More
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts complete as per specifications, Rubble stone masonry in cement mortar etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
0.11
-
40.42
... More
Earthwork excavation for pipeline trenches including depositing on bank upto a lead of 50 mtrs and depth up to 2.00 mtrs. Including shoring and strutting, danger lighting and using sight rails and boning rods at every 100 mtrs. Wherever necessary as directed in the following strata. (Manual Means) In Ordinary soil etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
73.85
-
20316.14
... More
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttresses, plinth and string courses etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
5.82
-
2199.96
... More
Providing and installing at site of work P.V.C. 63mm dia 6 KSC pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc., complete as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
6571
-
808233
... More
Supply and delivery of Resilient seated soft sealing 50mm dia Sluice Valves with body, bonnet of Ductile Iron of grade GGG50, wedge fully rubber lined with EPDM and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face dimensions as per BS 5163-89/IS 14846-2000/ DIN 3202 F4/F5. The stem sealing should be with Toroidal sealing rings (minimum 2 'O' rings). All the valves should be with electrostatic powder coating both inside and outside with pocket less body passage. The valves shall be supplied with suitable size galvanized bolts and nuts of required numbers as per relevant IS.
10
-
58100
... More
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standerd procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including , testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing)Upto 110mm dia,Coils shall be used 250 mm PE 80 (PN 10.0 / 10 Kg/cm2) etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
940
-
1211660
... More
Providing and laying in position plain cement concrete of mix M20 with OPC cement @ 300kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.43cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation,plinth and cills, including cost of all materials, labour, HOM of machinery, curing etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
71.71
-
410997.98
... More
Flow control Valve 10 LPM : Providing, & fixing Flow control valve using food grade materials SS 316 ball / 1/2 " [15mm] including cost of all materials, labour charges, HOM and testing complete as per of following specification. The FCV nominal design is for 10Ltr/Min. Discharges at 0.5 bar pressure loss and should not exceed the flow the range of 7 Lit /Min at 1 bar or more pressure. MOC of valve - Food grade stainless steel SS-316. MOC of Ball stainless steel-316. Flow direction arrow embossed on its outside surface. The Valve should act as flow control valve and non- return valve. Minimum operating pressure- 0.1 kgf( 10 cm head). Designed pressure: 1 meter to 50 meters. Accuracy of valves: + 20% of average flow rate. Orifice size: not be less than 12mm. Ball size: not less than 12 mm. Weight of FCV: not less than 125 gms .Length: not be less than 70 mm.The FCV is with internal arrangements of very simple passage in line such that the valve will pass the small floating particles if any entered in the valve to avoid choking. The FCV shall be got tested from FCRI by the manufacturer as per above standards, The quantum of checking to be done from FCRI is attached herewith. The FCV should be fitted on Saddle, which is fixed on distribution pipeline etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
1036
-
342294.4
... More
-do- in Hard Soil
138.59
-
9749.81
... More
Refilling the basement and pipeline trenches with selected available earth from trench excavation including watering, Consolidation in layers of 15 cm thick including disposing of the surplus earth with all lead & lifts. (Compacting with vibro roller) etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
507.6
-
54896.94
... More
Supply and delivery of Woltman model with removal mechanism 100mm dia Bulk Flow meter confirming to ISO 4064 part I,II,III class B or IS 779 and IS 2373 with life cycle test certificate from FCRI/ NABL accredited lab. The water meters shall have magnetic drivers or mechanical drivers and shall be versatile for installation in any position. The meters shall be hydrodynamically, hydrostatically balanced. The runner, runner chamber, pointer of the meter shall be as per ISO 4064 class B specification. Dry dial excavated counter housing fully protected against flooding ensuring easy reading in all climates etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
1
-
25531
... More
-do- for 90mm dia pipe
54
-
9072
... More
Providing and laying in position plain cement concrete of mix M20 with OPC cement @ 300kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.43cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation,plinth and cills, including cost of all materials, labour, HOM of machinery, curing etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
0.16
-
917.02
... More
Providing and filling sand in foundation upto plinth to required depth for sub soil treatment including watering ramming etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
3
-
5575.5
... More
-do- for 75mm dia pipe
124
-
15624
... More
-do-80 mm dia
4
-
34208
... More
Providing FHTCs to 1036 Households in Gorebal Habitation of Gorebal Village, Sindhanur Taluka in Raichur District through Single Village Scheme to Gorebal village in Raichur District (55 LPCD) : DISTRIBUTION SYSTEM :- Earthwork excavation for pipe line tenches including depositing on banks upto a lead of 50 mts and depth up to 2.0 mts including shoring and strutting ,danger lighting and sight rails and boning rods at every 100 mts.Wherever necessary as directed in Ordinary Soil by Manual Means etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
1101.6
-
303050.16
... More
-do- 150mm dia
1
-
39559
... More
Providing and laying in position plain cement concrete of mix M20 with OPC cement @ 300kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.43cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation,plinth and cills, including cost of all materials, labour, HOM of machinery, curing etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
202.58
-
1161064.99
... More
Cutting of road surface for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting in Cutting in Cement concrete road surface etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
187.88
-
218185.04
... More
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including for OHT & reservoier, cost of materials, labour, HOM of machinery complete as per specifications. TMT bars Fe 500 etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
6.7
-
502446.74
... More
-do- in Hard Soil
734.4
-
202033.44
... More
-do- Cutting in Macadam road surface
29.4
-
10681.02
... More
PP Make Adopter suitable for a Pressure Rating PN16 (Both side adopter ) 20x15mm ( �inch) 20 x 20 mm dia Adopter etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
1036
-
110023.2
... More
Providing murrum or gravel bedding for the pipeline including watering and consolidation by punners etc. complete with all lead and lift. (in black cotton soil and rock reaches) etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
105.75
-
28758.71
... More
Providing and laying in position plain cement concrete of mix M20 with OPC cement @ 300kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.43cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation,plinth and cills, including cost of all materials, labour, HOM of machinery, curing etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
115.14
-
659912.24
... More
Supplying and fixing of HDPE Water meter box to protect the water meter of class "B" Multijet type of size 15 to 32 mm including HDPE box with base dia.300 mm x lid dia 200 mm x height 250 mm with openable lid and the cover is buried below GL with GI including earth work excavation for 600 mm x 600 mm and base sand filling for 100 mm thick over which the cover is placed and enclosed by PCC 1:2:4 using 12-20mm BG jelly for an height of 150 mm thick and refilling with excavated earth for balance 100 mm height, disposal of excess earth with all lead and lifts etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
1036
-
518000
... More
Refilling the basement and pipeline trenches with selected available earth from trench excavation including watering, Consolidation in layers of 15 cm thick including disposing of the surplus earth with all lead & lifts. (Compacting with vibro roller) etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
181.59
-
19638.96
... More
-do- Cutting in Asphalt road surface
14.7
-
8365.77
... More
Providing and fixing LDPE sheet 1000 micron for bed and sides of canal including cost of all materials, labour, laying, joining etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
2337.5
-
643046.25
... More
-do- above 150mm & upto 200mm
735
-
7217.7
... More
-do- Cutting in Macadam road surface
58.5
-
21253.05
... More
FUNCTIONAL HOUSEHOLD TAP CONNECTIONS (1036 Nos):- Cutting of road surface for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in Cutting Macadam Road Surface etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work Cutting in Cement concrete road surface
63
-
73161.9
... More
Supply and delivery at site special moulded variety 63 mm dia PVC service saddles as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
843
-
79663.5
... More
PP Make Female Threaded Elbow with SS304/ Brass/Plastic inserts suitable for a Pressure Rating PN16 (FTE 90 deg ) 20x15mm ( �inch) 20x 20 mm dia elbow etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
3108
-
311732.4
... More
Providing and fixing in position brass bib cock of approved quality nominal bore including cost of all materials, labour etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
1036
-
206682
... More
Giving hydraulic test for C.I. / R.C.C. / P.V.C. / H.D.P.E/ D.I /A.C. pipelines to the pressure equal to two times the working pressure including cost of supply of water upto 80mm etc., complete as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
7418
-
36199.84
... More
-do-150 mm dia
1
-
18965
... More
Supplying,laying,jointing ,testing and commissioning of 32mm dia G.I. Pipes conforming to IS 1239:1990 with latest amendments, including fixing Collars, Elbows, Tees, bends, Glad Cocks and other Fittings (Excluding Cost of Specials) with Cuts and Threads wherever necessary including conveying the materials to workspot, including testing for water tightness with all lead and lifts etc complete (Contractor shall make his own arrangements for procuring water for testing) etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
777
-
218337
... More
Earth work excavatoin for water Supply & Sanitary lines, Electrical conduits either in pits or pipe line trenches (upto 600mm Trench width) as per drawing and technical specification, including setting out, construction of shoring, strutting, barricading, danger lighting, bracing, using sight rails & boning rods at every 100 mm whevere necessary removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench, including backfilling the excavated earth to the extent required and utilising the remaining available excavated earth locally for the work. in the following strata classifications by Mechanical Means In Ordinary soil etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
380.7
-
51965.55
... More
-do- 160 mm dia 6 KSC PVC
735
-
388080
... More
Design, fabrication , supply and errection, testing and commissioning of adequate capacity screw type hoist consisting of supporting structure, platform, ladder etc. with all accessories for operating canal escape/regulator gate including cost of all materials, machinery, labour, cutting, alighning, anchoring, welding, finishing, cleaning applying two coats of zinc chromate red oxide primer and three coats of approved synthetic enamel paint etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
1
-
35800
... More
Refilling the basement and pipeline trenches with selected available earth from trench excavation including watering, Consolidation in layers of 15 cm thick including disposing of the surplus earth with all lead & lifts. (Compacting with vibro roller) etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
1678.86
-
181568.71
... More
Excavating grip trenches of specified size in all kinds of soil in existing bund for abutting fresh embankment to strengthen he existing bund including disposing off the excavated soil in specified dump area etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
6.8
-
1577.94
... More
-do- 110 mm dia 6 KSC PVC
449
-
122577
... More
Supplying and fixing of fixed height surface box H-4057 MD-KU with PP 40% GF Lid, Housing of PA+, Locking clip of PP with Notched bolt M 12 x 130 hexagon head A2-70 for service connection valves, design derived from DIN 4057, Should be suppied with support tile I (FSL, FSS ,SI) ,Should be able to receive class AA traffic loads etc., complete as per specification,design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
19
-
51965
... More
-do- above 100mm & upto 150mm
449
-
3300.15
... More
Earth work in excavation of foundation of structures upto 3 m depth by Mechanical means as per drawing and technical specification, including setting out, providing shoring,strutting and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, filling back the excavated earth to the extent required and utilising / transporting the remaining earth upto 1.00km lead, including cost of labour, materials and HOM of machineries in Ordinary Soil etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
92.4
-
5045.04
... More
Refilling the basement and pipe line trenches with selected available earth from trench excavation including watering , consolidation in layers of 15 cms thick including disposing of the surplus earth with all lead . (Compacting with Vibro Roller) Note :Add 203.00/ cum for earth from borrow pits etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
223.12
-
24130.43
... More
Providing and laying in position plain cement concrete of grade M10 with OPC cement @ 220kgs, with 40mm and down size graded granite metal coarse aggregates @0.892cum and fine aggregtes @ 0.465cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation including cost of all materials, labour, HOM of machinery, curing etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
4.87
-
27021.44
... More
Providing casing embankment using semi-pervious soil from approved borrow areas in layers of 250 to 300 mm before compaction including cost of al materials, machinery, labour, all other operations such as excavation, sorting out, transportation, spreading layers of specified thickness, breaking clods, sectioning, watering, compacting to density control of not less than 95% using power roller etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
7881.8
-
2073701.58
... More
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including for OHT & reservoier, cost of materials, labour, HOM of machinery etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
203.81
-
15283.71
... More
-do- for 110mm dia pipe
15
-
2992.5
... More
-do- In Hard soil
152.28
-
41892.23
... More
-do- 90 mm dia 6 KSC PVC
1172
-
233228
... More
IMPROVEMENTS TO EXISTING IMPOUNDING RESERVIOR: Clearing thin jungle growth (more than 50% open space) including bushes upto 300 mm / parthenium & other weeds including burning or disposing off the same etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
2550
-
5074.5
... More
Providing and laying in position reinforced cement concrete of design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.46cum, with superplastisiser @3lts confirming to IS9103 -1999 Reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated forall works in ground floor level for roof slabs, staircase, lintels, and beams,retaining walls, return walls, walls ( any thickness ) including attached pilasters, columns, pillars,posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks,plain window cills ,fillets etc., including cost of all materials, labour, HOM of machinery, curing etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
1.2
-
7611.06
... More
-do- above 80mm & upto 100mm
1172
-
6867.92
... More
Providing and laying in position plain cement concrete of grade M 15 with cement @ 240kgs, with 20mm and down size graded granite metal coarse aggregates @0.878cum and fine aggregtes @ 0.53cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation,plinth and cills, ncluding cost of all materials, labour, HOM of machinery, curing etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
2.55
-
14957.46
... More
CANAL HEAD WORK: Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts complete as per specifications, By Mechanical Means, Cement Concrete Grade M-15 & M-20 etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
7.68
-
3144.96
... More
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and complete as per specifications, Lime /Cement Concrete, By Manual Means, Cement Concrete Grade M-15 etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
0.08
-
46.7
... More
Providing and laying in position reinforced cement concrete of Design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.460 cum, with super plasticisers @ 3 liters confirming to IS 9103-1999 reafirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick,vibrated for all works in foundation for footings, pedastals, retaining walls, return walls, walls (any thickness ) including attached pilasters, columnspillars, posts, struts, buttresses, bed blocks,anchor blocks & plinths etc., including cost of all materials, labour, HOM of machinery, curing etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
0.08
-
487.75
... More
RCC THRUST BLOCK 1.0x1.0x1.0 3 Nos : Earthwork excavation by manual means for foundation of buildings, culverts, water supply and sanitary lines and electrical conduits etc, either in pits or in trenches 1.5m and above in width, in ordinary soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50 m. including breaking of clods etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
0.66
-
207.21
... More
-do- Cutting in Aspalt road surface
4.05
-
2304.86
... More
Design fabrication, supply, erection , testing commissioning of fixed wheel type vertical lift gate (with top seal) consist of skin plate, horizontal and vertical girder, wheel, guide rollers, rubber seal etc. seals etc. with all accessories for canal escape/regulator vent including cost of all materials, machinery, labour, cutting, alighning, welding, finishing, cleaning, applying one coat of zinc rich epoxy primer and three coats of cold applied coal tar epoxy paint, seal fixing etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
0.45
-
64035
... More
GRAVITY MAIN:- Earthwork excavation for pipeline trenches including depositing on bank upto a lead of 50 mtrs and depth up to 2.00 mtrs. Including shoring and strutting, danger lighting and using sight rails and boning rods at every 100 mtrs In Ordinary soil etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
101.52
-
27928.15
... More
Providing and laying in position reinforced cement concrete of Design mix M30 with OPC cement @ 360kgs, with 20mm and down size graded granite metal coarse aggregates @0.69 cum and fine aggregtes @ 0.46 cum, with super plasticisers @ 1% by wt. of cement, confirming to IS 9103-1999 reafirmed-2008 at machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works Bottom Raft, RCC Raft of Flash mixers, Floculator, RSF, Raft of Zonal balancing Tanks, Raft of Master Blancing Tank, Raft of IPS/IMP, Side wall and Top Dome for GLSR's, Pure water sump etc.. ., including cost of all materials, labour, HOM of machinery, curing etc., complete as per specification, design and drawings including cost of all material, labour charges and hirecharges of machineries with all lead and lift as directed by the Engineer-in-charge of work
89.25
-
566072.59
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements