Rural Water Supply And Sanitation Department Tender
... More
The RWSS has issued a formal invitation for competitive bids for the Rural Water Supply And Sanitation Department project, for Provding302fhtc&50klat9mstohtatmuddanahalli,42fhtc&10kl7.5mstohtatkacheegatta,86fhtc&25kl7.5mstohtatkenchenahalli,44fhtc&10klat7.5mstohtatkenkerehalli,48fhtc&10klat7.5mstohtatk.hatti,75fhtc&10klat7.5mstohtatkoranahalli,116fhtc&50klat7.5mstohtatk.koppalu,118fhtc&25klat7.5mstohtatvaderahalli,67fhtc&10klat9mstohtatbommenahalli,46fhtc&10klat7.5mstohtatjavanahalli,52fhtc&10klat7.5mstohtatmalenahalli&198fhtc&50klat7.5mstohtatmurundivillageinjajur,kacheegatta&murundigpundermvsschinarsikeretq&hassandist in Hassan, Karnataka, with an estimated contract value of Rs. 4,66,63,239. The bid opening date for this tender is 17-02-2022 and the last date for bid submission is 24-02-2022. Interested bidders for Rural Water Supply And Sanitation Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Rural Water Supply And Sanitation Department - RWSS Tender
Opening Date17 Feb 2022
Closing Date24 Feb 2022
Tender Amount₹ 4,66,63,239
Costs
EMD
₹ 6,25,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Provding302fhtc&50klat9mstohtatmuddanahalli,42fhtc&10kl7.5mstohtatkacheegatta,86fhtc&25kl7.5mstohtatkenchenahalli,44fhtc&10klat7.5mstohtatkenkerehalli,48fhtc&10klat7.5mstohtatk.hatti,75fhtc&10klat7.5mstohtatkoranahalli,116fhtc&50klat7.5mstohtatk.koppalu,118fhtc&25klat7.5mstohtatvaderahalli,67fhtc&10klat9mstohtatbommenahalli,46fhtc&10klat7.5mstohtatjavanahalli,52fhtc&10klat7.5mstohtatmalenahalli&198fhtc&50klat7.5mstohtatmurundivillageinjajur,kacheegatta&murundigpundermvsschinarsikeretq&hassandist
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
RWSSD/2021-22/WS/WORK_INDENT39219Bid Award Id
ViewTender No
RWSSD/2021-22/WS/WORK_INDENT39219Tender Authority
Rural Water Supply And Sanitation Department ViewPurchaser Address
-Website
http://eproc.karnataka.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Distribution System Earthwork excavation for pipeline trenches including depositing on bank upto a lead of 50 mtrs and depth up to 2.00 mtrs. Including shoring and strutting, danger lighting and using sight rails and boning rods at every 100 mtrs. Wherever necessary as directed in the following strata. (Manual Means) [RDW&S SR 2019-20 Chapter No: 2 Item No: 2.22.1 & 2.22.2] Manual means the rate including with all leads, lifts,loading,unloading,cost and convience of all materails, labour,equipments etc.,complete as per the direction of the engineer of the work.
4996.002
-
1308952.52
... More
Providing and fixing M.S. Hand railing for Balcony with 50mm dia. M.S. hollow pipe of 14 gauge, welded to 20mmx20mm M.S square rod placed vertically, spaced at 100mm at regular intervals of 600mm. These vertical rods laterally tied to 3 horizontal rods spaced at equal interval. These assembly is fixed to concrete by using expansion bolts and welding the same to reinforcement bars and making good the surface. All the joints and sections hould be cut to length, welded and grinded wherever necessary etc., complete . The work includes cost of all materials, labour charges for all items of work, hire charges for welding, cutting and grinding equipment, and electricity charges, etc., complete as per specification and drawing. (RDW&S SR 2019-20 Chapter No. 6 Item No: 6.22),
50.4
-
143136
... More
Providing 12mm thick cement plaster in single coat with cement mortar 1:3, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. (RDW&S SR 2019-20 Chapter No: 9 Item No: 9.05).
782.801
-
165171.01
... More
Valve Chambers Supplying and fixing of fixed height surface box H -4057 MD - KU with PP 40% GF Lid housing of PA+ locking clip of PP with notched bolt M 12 x 130 hexagon hrad A2 - 70 for service connection valves design derived from DIN 4057 should be supplied with support tile ( FSL, FSS , SI) should br able to recieve class AA traffic loads [KUWS&DB SR 2018-19 Pg No. 23 itm 20] For 50 - 200 mm Sluice and Scour Valve the rate including with all leads, lifts,loading,unloading,cost and convience of all materails, labour,equipments etc.,complete as per the direction of the engineer of the work.
60
-
164100
... More
Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an angle of 70 degrees to horizontal including necessary 25mm dia., G.I. shutters with necessary G.I. fasteners for bracing the ladders to the Tank walls to prevent buckling of the ladder with necessary (M-15) bed for embedding the ladder bottom complete. (RDW&S MYS Circle, SR 2019-20, P.No -38, I.No - 4.63)
6.2
-
19213.8
... More
Providing and laying in position plain cement concrete of grade M 10 with OPC cement @ 220kgs, with 40mm and down size graded granite metal coarse aggregates @0.892cum and fine aggregtes @ 0.465cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation including cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification (RDW&S MYS Circle, SR 2019-20, P.No - 30, I.No - 4.42)
22.976
-
128343.94
... More
Labour charges for hoisting C.I. flanged pipes 2.75mtrs length in position aligning the plumb and jointing for RCC over head tank 80mm to 200mm. (RDW&S SR 2019-20 Chapter No: 4 Item No: 4.69).
108
-
66528
... More
Providing and laying in position plain cement concrete of grade M 10 with OPC cement @ 220kgs, with 40mm and down size graded granite metal coarse aggregates @0.892cum and fine aggregtes @ 0.465cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation including cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification (RDW&S MYS Circle, SR 2019-20, P.No - 30, I.No - 4.42)
4.55
-
25416.3
... More
50000 lit OHT of 9.00 mt Staging New OHT: Earth work in excavation of foundation of structures upto 3 m depth by Mechanical means as per drawing and technical specification, including setting out, providing shoring, strutting and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, filling back the excavated earth to the extent required and utilising / transporting the remaining earth upto 1.00km lead, including cost of labour, materials and HOM of machineries, etc., complete. (RDW&S MYS Circle, SR 2019-20, P.No - 9, I.No - 2.09). Ordinary/Hard soil
106.213
-
5523.08
... More
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including for OHT & reservoier, cost of materials, labour, HOM of machinery complete as per specifications. (RDW&S MYS Circle, SR 2019-20, P.No - 38, I.No - 4.59) FE550
21.899
-
1848330.35
... More
Supply and delivery at site CIDE pipes ISI marked (horizontal CIUDF) of different sizes as per ISI 181/ 1986 with latest amendments if any, the flange should be drilled as per IS 1538/ 1976, the pipes should bear ISI marking on them.. (RDW&S SR 2019-20 Chapter No. 15 Item No: 15.48 & 15.48.5). 1.00 meter length, 80mm dia
8
-
9600
... More
Providing and constructing load bearing wall with solid concrete blocks having block density not less than 1800kg/m3 having a minimum average compressive strength of 5.00 N/mm2 confirming to IS 2185 (Part 1):2005 and constructed with CM 1:4, as per IS 2572:2005 including cost of all materials labour charges, scaffolding, curing, hire charges of machineries etc., complete as per specifications with solid concrete blocks of size 400x150x200mm. (RDW&S SR 2019-20 Chapter No: 5 Item No: 5.07.2).
48.6
-
38731.77
... More
Labour charges for fixing puddle flanges in position of RCC including (80mm to 200mm). (RDW&S SR 2019-20 Chapter No: 4 Item No: 4.68).
4
-
1824
... More
Supply and delivery at site CIDE pipes ISI marked (horizontal CIUDF) of different sizes as per ISI 181/ 1986 with latest amendments if any, the flange should be drilled as per IS 1538/ 1976, the pipes should bear ISI marking on them.. (RDW&S SR 2019-20 Chapter No. 15 Item No: 15.48 & 15.48.5). 1.00 meter length, 80mm dia
6
-
7200
... More
Road Restoration Refilling the basement and pipeline trenches with selected available earth from trench excavation including watering, Consolidation in layers of 15 cm thick including disposing of the surplus earth with all lead & lifts. (Compacting with vibro roller) Note: Add Rs. 203.00 / cum for earth obtained from borrow pits. [RDW&S SR 2019-20 Chapter No: 2 Item No: 2.25] the rate including with all leads, lifts,loading,unloading,cost and convience of all materails, labour,equipments etc.,complete as per the direction of the engineer of the work.
5258.925
-
541669.28
... More
Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an angle of 70 degrees to horizontal including necessary 25mm dia., G.I. shutters with necessary G.I. fasteners for bracing the ladders to the Tank walls to prevent buckling of the ladder with necessary (M-15) bed for embedding the ladder bottom complete. (RDW&S MYS Circle, SR 2019-20, P.No -38, I.No - 4.63)
12
-
37188
... More
Providing 2 coats of snowcem / Water-proof cement paint of approved colour and shade over one coat of primer including curing etc.,complete for RCC over head tank. (RDW&S MYSCircle, SR 2019-20, P.No - 39, I.No - 4.70).
308.33
-
65674.29
... More
Providing 2 coats of snowcem / Water-proof cement paint of approved colour and shade over one coat of primer including curing etc.,complete for RCC over head tank. (RDW&S MYSCircle, SR 2019-20, P.No - 39, I.No - 4.70).
138.867
-
29578.67
... More
Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. ( PRED SR 2019-20, P-41 It No-4.1 III).
543.86
-
588456.52
... More
Providing and laying Reinforced cement concrete of mix design of M-25 Grade with cement @ 340 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.7 cum and fine aggregates @ 0.47 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete for R. rafts, raft ring-beam, column footing, columns below ground level (exclusive cost of steel and fabrication charges) (RDW&S MYS Circle, SR 2019-20, P.No - 32, I.No - 4.47). 9.00m staging
6.33
-
72389.88
... More
Providing different dia Medium class 90” double flanged bend confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete.. (RDW&S SR 2019-20 Chapter No. 15 Item No: 15.61). 80mm dia
4
-
2000
... More
Supply and delivery at site CIDE pipes ISI marked (horizontal CIUDF) of different sizes as per ISI 181/ 1986 with latest amendments if any, the flange should be drilled as per IS 1538/ 1976, the pipes should bear ISI marking on them.. (RDW&S SR 2019-20 Chapter No. 15 Item No: 15.48 & 15.48.5). 2.75 meter length, 80mm dia
28
-
78400
... More
Providing and fixing M.S. Hand railing for Balcony with 50mm dia. M.S. hollow pipe of 14 gauge, welded to 20mmx20mm M.S square rod placed vertically, spaced at 100mm at regular intervals of 600mm. These vertical rods laterally tied to 3 horizontal rods spaced at equal interval. These assembly is fixed to concrete by using expansion bolts and welding the same to reinforcement bars and making good the surface. All the joints and sections hould be cut to length, welded and grinded wherever necessary etc., complete . The work includes cost of all materials, labour charges for all items of work, hire charges for welding, cutting and grinding equipment, and electricity charges, etc., complete as per specification and drawing. (RDW&S SR 2019-20 Chapter No. 6 Item No: 6.22),
27.6
-
78384
... More
Supplying,laying,jointing ,testing and commissioning of G.I. Pipes conforming to IS 1239:1990 with latest amendments, including fixing Collars, Elbows, Tees, bends, Glad Cocks and other Fittings (Excluding Cost of Specials) with Cuts and Threads wherever necessary including conveying the materials to workspot, including testing for water tightness with all lead and lifts etc complete (Contractor shall make his own arrangements for procuring water for testing) (RDW&S CIRCLE MYS SR 2019-20 Pg.No.90 It.No.10.04). For Crossing drain 32 mm dia.
884.25
-
248474.25
... More
Valve Chambers : Providing and laying in position reinforced cement concrete of Design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.460 cum, with super plasticisers @ 3 liters confirming to IS 9103-1999 reafirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick,vibrated for all works in foundation for footings, pedestals, retaining walls, return walls, walls (any thickness ) including attached pilasters, columns pillars, posts, struts, buttresses, bed blocks, anchor blocks & plinths etc., including cost of all materials, labour, HOM of machinery, curing, complete but excluding cost of reinforcement as per specifications.. (RDW&S SR 2019-20 Chapter No: 4 Item No: 4.08),
3.888
-
24436.08
... More
Valve Chambers : Providing and laying in position reinforced cement concrete of Design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.460 cum, with super plasticisers @ 3 liters confirming to IS 9103-1999 reafirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick,vibrated for all works in foundation for footings, pedestals, retaining walls, return walls, walls (any thickness ) including attached pilasters, columns pillars, posts, struts, buttresses, bed blocks, anchor blocks & plinths etc., including cost of all materials, labour, HOM of machinery, curing, complete but excluding cost of reinforcement as per specifications.. (RDW&S SR 2019-20 Chapter No: 4 Item No: 4.08),
1.296
-
8145.36
... More
Providing and fixing 60x60cms M.S. inspection door with necessary M.S. frame made out of M.S. angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, painting etc., complete (for RCC over head tank and G.L.S.R.) (RDW&S MYS Circle, SR 2019-20, P.No - 39, I.No - 4.66)
2
-
3636
... More
Supply and delivery at site CIDE pipes ISI marked (horizontal CIUDF) of different sizes as per ISI 181/ 1986 with latest amendments if any, the flange should be drilled as per IS 1538/ 1976, the pipes should bear ISI marking on them.. (RDW&S SR 2019-20 Chapter No. 15 Item No: 15.48 & 15.48.5). 1.00 meter length, 80mm dia
4
-
4800
... More
KSRB13-8 : Providing and fixing to wall, ceiling and floor, medium density polyethylene pipes 6.00 kgs/sq.cm working pressure of outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor including cost of all materials, labour charges, HOM and testing complete as per specifications. Specification No.KBS 13.2.15.1 I 13.9 (PWP&IWTD CIRCLE HSN SR 2018-19 Pg.No.95 It.No. 13.66). MDPE pipe 20mm dia.
7074
-
756918
... More
Laying cast iron pipes and specials of all classes without earth work, true to line and level including conveying carefully to site, rolling and lowering into trenches and perfect linking of joints etc., wherever necessary. (RDW&S SR 2019-20 Chapter No. 10 Item No: 10.11.1).
252
-
13104
... More
Providing different dia Medium class 90” double flanged bend confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete.. (RDW&S SR 2019-20 Chapter No. 15 Item No: 15.61). 80mm dia
8
-
4000
... More
Providing & fixing copper lightning arrester with five spikes and 20mm dia copper tube or suitable length of aluminium strip of spike 25mmx3mm including grounding as per specification. The aluminium strip is to be encased in G.I. conduct pipe or 40mm dia., 6.8 M long suitably joined by collar with all specials, fixed to one of the columns etc., complete up to 6 M staging. (RDW&S MYS Circle, SR 2019-20, P.No - 40, I.No - 4.72)
1
-
9645
... More
Laying cast iron pipes and specials of all classes without earth work, true to line and level including conveying carefully to site, rolling and lowering into trenches and perfect linking of joints etc., wherever necessary. (RDW&S SR 2019-20 Chapter No. 10 Item No: 10.11.1).
54
-
2808
... More
Providing and laying Reinforced cement concrete of mix design of M-30 Grade with cement @ 360 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @0.46 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., completeas per design and specifications etc., complete for top rib and top dome or top slab (exclusive cost of steel and fabrication charges) (RDW&S MYS Circle, SR 2019-20, P.No - 36, I.No - 4.56) 7.50m staging
12.785
-
181585.36
... More
Refilling the basement and pipeline trenches with selected available earth from trench excavation including watering, Consolidation in layers of 15 cm thick including disposing of the surplus earth with all lead & lifts. (Compacting with vibro roller) (RDW&S CIRCLE MYS SR 2019-20 Pg.No. 12 It.No.2.25).
954.99
-
98363.97
... More
Providing and fixing 60x60cms M.S. inspection door with necessary M.S. frame made out of M.S. angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, painting etc., complete (for RCC over head tank and G.L.S.R.) (RDW&S MYS Circle, SR 2019-20, P.No - 39, I.No - 4.66)
1
-
1818
... More
Providing and fixing M.S. Hand railing for Balcony with 50mm dia. M.S. hollow pipe of 14 gauge, welded to 20mmx20mm M.S square rod placed vertically, spaced at 100mm at regular intervals of 600mm. These vertical rods laterally tied to 3 horizontal rods spaced at equal interval. These assembly is fixed to concrete by using expansion bolts and welding the same to reinforcement bars and making good the surface. All the joints and sections hould be cut to length, welded and grinded wherever necessary etc., complete . The work includes cost of all materials, labour charges for all items of work, hire charges for welding, cutting and grinding equipment, and electricity charges, etc., complete as per specification and drawing. (RDW&S SR 2019-20 Chapter No. 6 Item No: 6.22),
24
-
68160
... More
Laying cast iron pipes and specials of all classes without earth work, true to line and level including conveying carefully to site, rolling and lowering into trenches and perfect linking of joints etc., wherever necessary. (RDW&S SR 2019-20 Chapter No. 10 Item No: 10.11.1).
84
-
4368
... More
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including for OHT & reservoier, cost of materials, labour, HOM of machinery complete as per specifications. (RDW&S MYS Circle, SR 2019-20, P.No - 38, I.No - 4.59) FE550
6.27
-
529203.67
... More
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including for OHT & reservoier, cost of materials, labour, HOM of machinery complete as per specifications. (RDW&S MYS Circle, SR 2019-20, P.No - 38, I.No - 4.59) FE550
8.753
-
738775.08
... More
Providing and constructing load bearing wall with solid concrete blocks having block density not less than 1800kg/m3 having a minimum average compressive strength of 5.00 N/mm2 confirming to IS 2185 (Part 1):2005 and constructed with CM 1:4, as per IS 2572:2005 including cost of all materials labour charges, scaffolding, curing, hire charges of machineries etc., complete as per specifications with solid concrete blocks of size 400x150x200mm. (RDW&S SR 2019-20 Chapter No: 5 Item No: 5.07.2).
8.1
-
6455.3
... More
Providing and fixing M.S. ladder between landing 45 cms. wide using angle iron of following size and 20 mm M.S. bars at 25cms. centre to centre with necessary supports of same angle iron as directed including hand railing on both sides with 25mm dia G.I. pipes with angle iron props at 2 mtrs, interval and 0.5 mtr, height including fixing in ground with C.C. 1:2:4 and two coats of nonpoisonous anticorrosive bituminous paint with all lead and lift etc., complete. 65x65x8mm angle iron frame. (RDW&S MYS Circle, SR 2019-20, P.No - 38, I.No - 4.62)
66
-
120186
... More
Supply and delivery at site wrought middle steel (galvanized) 15 mm dia GI union confirming to IS 1239-II, 1991 with latest amendments if any. (RDW&S CIRCLE MYS SR 2019-20 Pg.No. 325 It.No.15.78). 15 mm dia GI union.
2358
-
129690
... More
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including for OHT & reservoier, cost of materials, labour, HOM of machinery complete as per specifications. TMT bars Fe 500. (RDW&S CIRCLE MYS SR 2019-20 Pg.No.38 It.No.4.59.1).
103.68
-
8683.2
... More
Providing and laying Reinforced cement concrete of mix design of M-30 Grade with cement @ 360 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @0.46 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete as per design and specification for staging, columns and braces above ground level (exclusive of cost of steel and fabrication charges) (RDW&S MYS Circle, SR 2019-20, P.No - 32, I.No - 4.48). 9.00m staging
8.895
-
103822.44
... More
Laying cast iron pipes and specials of all classes without earth work, true to line and level including conveying carefully to site, rolling and lowering into trenches and perfect linking of joints etc., wherever necessary. (RDW&S SR 2019-20 Chapter No. 10 Item No: 10.11.1).
48
-
2496
... More
Providing and fixing M.S. ladder between landing 45 cms. wide using angle iron of following size and 20 mm M.S. bars at 25cms. centre to centre with necessary supports of same angle iron as directed including hand railing on both sides with 25mm dia G.I. pipes with angle iron props at 2 mtrs, interval and 0.5 mtr, height including fixing in ground with C.C. 1:2:4 and two coats of nonpoisonous anticorrosive bituminous paint with all lead and lift etc., complete. 65x65x8mm angle iron frame. (RDW&S MYS Circle, SR 2019-20, P.No - 38, I.No - 4.62)
24
-
43704
... More
Providing and fixing M.S. Hand railing for Balcony with 50mm dia. M.S. hollow pipe of 14 gauge, welded to 20mmx20mm M.S square rod placed vertically, spaced at 100mm at regular intervals of 600mm. These vertical rods laterally tied to 3 horizontal rods spaced at equal interval. These assembly is fixed to concrete by using expansion bolts and welding the same to reinforcement bars and making good the surface. All the joints and sections hould be cut to length, welded and grinded wherever necessary etc., complete . The work includes cost of all materials, labour charges for all items of work, hire charges for welding, cutting and grinding equipment, and electricity charges, etc., complete as per specification and drawing. (RDW&S SR 2019-20 Chapter No. 6 Item No: 6.22),
55.2
-
156768
... More
Valve Chambers : Providing and laying in position reinforced cement concrete of Design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.460 cum, with super plasticisers @ 3 liters confirming to IS 9103-1999 reafirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick,vibrated for all works in foundation for footings, pedestals, retaining walls, return walls, walls (any thickness ) including attached pilasters, columns pillars, posts, struts, buttresses, bed blocks, anchor blocks & plinths etc., including cost of all materials, labour, HOM of machinery, curing, complete but excluding cost of reinforcement as per specifications.. (RDW&S SR 2019-20 Chapter No: 4 Item No: 4.08),
0.648
-
4072.68
... More
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including for OHT & reservoier, cost of materials, labour, HOM of machinery complete as per specifications. TMT bars Fe 500. (RDW&S CIRCLE MYS SR 2019-20 Pg.No.38 It.No.4.59.1).
51.84
-
4341.6
... More
Providing and laying Reinforced cement concrete of mix design of M-30 Grade with cement @ 360 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @0.46 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete as per design and specification and giving satisfactory water proof test including construction joints wherever necessary as per the directions of the departmental Officers complete for ring beam, side walls, bottom dome or bottom slab, shell portion and bottom ribs (exclusive of cost of steel and fabrication charges and jointing materials) (RDW&S MYS Circle, SR 2019-20, P.No - 34, I.No - 4.52) 7.50m staging
27.734
-
480574.75
... More
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including for OHT & reservoier, cost of materials, labour, HOM of machinery complete as per specifications. (RDW&S MYS Circle, SR 2019-20, P.No - 38, I.No - 4.59) FE550
3.738
-
315496.54
... More
Valve Chambers : Providing and laying in position reinforced cement concrete of Design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.460 cum, with super plasticisers @ 3 liters confirming to IS 9103-1999 reafirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick,vibrated for all works in foundation for footings, pedestals, retaining walls, return walls, walls (any thickness ) including attached pilasters, columns pillars, posts, struts, buttresses, bed blocks, anchor blocks & plinths etc., including cost of all materials, labour, HOM of machinery, curing, complete but excluding cost of reinforcement as per specifications.. (RDW&S SR 2019-20 Chapter No: 4 Item No: 4.08),
1.296
-
8145.36
... More
Providing and constructing RCC hexagonal ventilator finial for RCC over head tank the finial to be constructed with CC (M-20) proportion using 20mm and down size jelly with reinforcement using 6mm dia., M.S. rods 4 nos., for each of the pillars both ways for full width of doom at 12cm c/c, the ventilator to be of 0.45 M x 0.5 M size provided with 25mm x 25mm x 5mm M.S. frame welded with diamond mesh to its full width and depth fully covered with aluminium mosquito mesh finished smooth with CM 1:3 proportion to required shape and size and ornamental finish including two coats of anti-corrosive paint for frame and mesh and two coats of cement paint matching to over head tank etc., complete. (RDW&S MYS Circle, SR 2019-20, P.No - 39, I.No - 4.65)
1
-
5700
... More
Providing & fixing copper lightning arrester with five spikes and 20mm dia copper tube or suitable length of aluminium strip of spike 25mmx3mm including grounding as per specification. The aluminium strip is to be encased in G.I. conduct pipe or 40mm dia., 6.8 M long suitably joined by collar with all specials, fixed to one of the columns etc., complete up to 6 M staging. (RDW&S MYS Circle, SR 2019-20, P.No - 40, I.No - 4.72)
6
-
57870
... More
Providing and constructing RCC hexagonal ventilator finial for RCC over head tank the finial to be constructed with CC (M-20) proportion using 20mm and down size jelly with reinforcement using 6mm dia., M.S. rods 4 nos., for each of the pillars both ways for full width of doom at 12cm c/c, the ventilator to be of 0.45 M x 0.5 M size provided with 25mm x 25mm x 5mm M.S. frame welded with diamond mesh to its full width and depth fully covered with aluminium mosquito mesh finished smooth with CM 1:3 proportion to required shape and size and ornamental finish including two coats of anti-corrosive paint for frame and mesh and two coats of cement paint matching to over head tank etc., complete. (RDW&S MYS Circle, SR 2019-20, P.No - 39, I.No - 4.65)
2
-
11400
... More
Providing 80 mm dia Bell mouthed pipes (flanged) confirming to IS 1538 (Part-I toXXII) 1978 with latest amendments if any cost of all materials, labour charges etc.complete.. (RDW&S SR 2019-20 Chapter No. 15 Item No: 15.57). ii 80mm CI All flanged Tee IS 1538 (Part XXIV)
1
-
320
... More
Supply and delivery at site CIDE pipes ISI marked (horizontal CIUDF) of different sizes as per ISI 181/ 1986 with latest amendments if any, the flange should be drilled as per IS 1538/ 1976, the pipes should bear ISI marking on them.. (RDW&S SR 2019-20 Chapter No. 15 Item No: 15.48 & 15.48.5). 2.75 meter length, 80mm dia
18
-
50400
... More
Supply and delivery at site CIDE pipes ISI marked (horizontal CIUDF) of different sizes as per ISI 181/ 1986 with latest amendments if any, the flange should be drilled as per IS 1538/ 1976, the pipes should bear ISI marking on them.. (RDW&S SR 2019-20 Chapter No. 15 Item No: 15.48 & 15.48.5). 2.75 meter length, 80mm dia
28
-
78400
... More
Providing and laying Reinforced cement concrete of mix design of M-30 Grade with cement @ 360 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @0.46 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete as per design and specification for staging, columns and braces above ground level (exclusive of cost of steel and fabrication charges) (RDW&S MYS Circle, SR 2019-20, P.No - 32, I.No - 4.48). 7.50m staging
10.5
-
119647.5
... More
Supply and delivery of Resilient seated soft sealing Sluice Valves with body, bonnet of Ductile Iron of grade GGG50, wedge fully rubber lined with EPDM and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face dimensions as per BS 5163-89/IS 14846-2000/ DIN 3202 F4/F5. The stem sealing should be with Toroidal sealing rings (minimum 2 'O' rings). All the valves should be with electrostatic powder coating both inside and outside with pocket less body passage. The valves shall be supplied with suitable size galvanized bolts and nuts of required numbers as per relevant IS. [RDW&S SR 2019-20 Chapter No. 15 Item No: 15.107] 80mm PN 16
6
-
51312
... More
10000 lit OHT of 12.00 mt Staging New OHT: Earth work in excavation of foundation of structures upto 3 m depth by Mechanical means as per drawing and technical specification, including setting out, providing shoring, strutting and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, filling back the excavated earth to the extent required and utilising / transporting the remaining earth upto 1.00km lead, including cost of labour, materials and HOM of machineries, etc., complete. (RDW&S MYS Circle, SR 2019-20, P.No - 9, I.No - 2.09). Ordinary/Hard soil
50.566
-
2629.43
... More
KSRRB M800-10. Painting new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade complete as per specifications (ii) English and Roman-Hyphen and the like not to be measured and paid for "MORTH Specification No 801.
3200
-
2240
... More
Providing and constructing RCC hexagonal ventilator finial for RCC over head tank the finial to be constructed with CC (M-20) proportion using 20mm and down size jelly with reinforcement using 6mm dia., M.S. rods 4 nos., for each of the pillars both ways for full width of doom at 12cm c/c, the ventilator to be of 0.45 M x 0.5 M size provided with 25mm x 25mm x 5mm M.S. frame welded with diamond mesh to its full width and depth fully covered with aluminium mosquito mesh finished smooth with CM 1:3 proportion to required shape and size and ornamental finish including two coats of anti-corrosive paint for frame and mesh and two coats of cement paint matching to over head tank etc., complete. (RDW&S MYS Circle, SR 2019-20, P.No - 39, I.No - 4.65)
6
-
34200
... More
Supplying and fixing R.C.C demarcation sTes of 30cms x 15 cms, and 90 cms. Deep using 1:2:4 C.C and 6 mm dia rods for verticals and stirrups and rendered smooth, including engraving letters "KWB and Arrow" 6mm deep on the top including fixing demarcation sTes 45cms below ground level and in CC 1:3:6, 15cms. height, with 8cms offset around the sTe and curing for 10 days including earthwork excavation in all types of soils with all lead and lift. (KUWS&DB B'LORE SR 2018-19 Pg.No.42 It No.24).
1179
-
518760
... More
Providing 2 coats of snowcem / Water-proof cement paint of approved colour and shade over one coat of primer including curing etc.,complete for RCC over head tank. (RDW&S MYSCircle, SR 2019-20, P.No - 39, I.No - 4.70).
394.028
-
83927.96
... More
Providing and laying in position plain cement concrete of grade M 10 with OPC cement @ 220kgs, with 40mm and down size graded granite metal coarse aggregates @0.892cum and fine aggregtes @ 0.465cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation including cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification (RDW&S MYS Circle, SR 2019-20, P.No - 30, I.No - 4.42)
8.988
-
50206.97
... More
Providing and constructing load bearing wall with solid concrete blocks having block density not less than 1800kg/m3 having a minimum average compressive strength of 5.00 N/mm2 confirming to IS 2185 (Part 1):2005 and constructed with CM 1:4, as per IS 2572:2005 including cost of all materials labour charges, scaffolding, curing, hire charges of machineries etc., complete as per specifications with solid concrete blocks of size 400x150x200mm. (RDW&S SR 2019-20 Chapter No: 5 Item No: 5.07.2).
16.2
-
12910.59
... More
Labour charges for hoisting C.I. flanged pipes 2.75mtrs length in position aligning the plumb and jointing for RCC over head tank 80mm to 200mm. (RDW&S SR 2019-20 Chapter No: 4 Item No: 4.69).
36
-
22176
... More
Providing and fixing enameled gauge plate 3 mm thick, 0.23 M wide with plastic float thick plastic indicator and flexible nylon wire etc., complete to 2.50 M height. (RDW&S MYS Circle, SR 2019-20, P.No - 39, I.No - 4.67). for 2.75 m height
1
-
3382
... More
KSRRB M800-10. Painting new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade complete as per specifications (ii) English and Roman-Hyphen and the like not to be measured and paid for "MORTH Specification No 801.
1600
-
1120
... More
Providing 12mm thick cement plaster in single coat with cement mortar 1:3, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. (RDW&S SR 2019-20 Chapter No: 9 Item No: 9.05).
209.614
-
44228.55
... More
Supplying,laying,jointing ,testing and commissioning of G.I. Pipes conforming to IS 1239:1990 with latest amendments, including fixing Collars, Elbows, Tees, bends, Glad Cocks and other Fittings (Excluding Cost of Specials) with Cuts and Threads wherever necessary including conveying the materials to workspot, including testing for water tightness with all lead and lifts etc complete (Contractor shall make his own arrangements for procuring water for testing). (RDW&S CIRCLE MYS SR 2019-20 Pg.No.90 It.No.10.04.02 ). 80mm - Class-B (MEDIUM) For Crossings.
120
-
70800
... More
Providing and laying Reinforced cement concrete of mix design of M-30 Grade with cement @ 360 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @0.46 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete for R. rafts, raft ring-beam, column footing, columns below ground level (exclusive cost of steel and fabrication charges) (RDW&S MYS Circle, SR 2019-20, P.No - 30, I.No - 4.44)
21.923
-
182772.05
... More
Providing & fixing copper lightning arrester with five spikes and 20mm dia copper tube or suitable length of aluminium strip of spike 25mmx3mm including grounding as per specification. The aluminium strip is to be encased in G.I. conduct pipe or 40mm dia., 6.8 M long suitably joined by collar with all specials, fixed to one of the columns etc., complete up to 6 M staging. (RDW&S MYS Circle, SR 2019-20, P.No - 40, I.No - 4.72). for every additional running meter
3
-
2094
... More
Painting new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade complete as per specifications. (“ii) English and Roman - Hyphen and the like not to be measured and paid for “ MORTH Specification No.801 (RDW&S MYS Circle, SR 2019-20, P.No - 331, I.No - 15.105). JJM 2021-22 H.NO. 000.
88425
-
61897.5
... More
Providing & fixing copper lightning arrester with five spikes and 20mm dia copper tube or suitable length of aluminium strip of spike 25mmx3mm including grounding as per specification. The aluminium strip is to be encased in G.I. conduct pipe or 40mm dia., 6.8 M long suitably joined by collar with all specials, fixed to one of the columns etc., complete up to 6 M staging. (RDW&S MYS Circle, SR 2019-20, P.No - 40, I.No - 4.72). for every additional running meter
3
-
2094
... More
Supplying,laying,jointing ,testing and commissioning of G.I. Pipes conforming to IS 1239:1990 with latest amendments, including fixing Collars, Elbows, Tees, bends, Glad Cocks and other Fittings (Excluding Cost of Specials) with Cuts and Threads wherever necessary including conveying the materials to workspot, including testing for water tightness with all lead and lifts etc complete (Contractor shall make his own arrangements for procuring water for testing) (RDW&S CIRCLE MYS SR 2019-20 Pg.No.90 It.No.10.04). For Meter box to tap 15 mm dia.
2063.25
-
259969.5
... More
Labour charges for fixing puddle flanges in position of RCC including (80mm to 200mm). (RDW&S SR 2019-20 Chapter No: 4 Item No: 4.68).
4
-
1824
... More
50000 lit OHT of 7.50 mt Staging New OHT: Earth work in excavation of foundation of structures upto 3 m depth by Mechanical means as per drawing and technical specification, including setting out, providing shoring, strutting and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, filling back the excavated earth to the extent required and utilising / transporting the remaining earth upto 1.00km lead, including cost of labour, materials and HOM of machineries, etc., complete. (RDW&S MYS Circle, SR 2019-20, P.No - 9, I.No - 2.09). Ordinary/Hard soil
212.427
-
11046.2
... More
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including for OHT & reservoier, cost of materials, labour, HOM of machinery complete as per specifications. TMT bars Fe 500. (RDW&S CIRCLE MYS SR 2019-20 Pg.No.38 It.No.4.59.1).
103.68
-
8683.2
... More
Laying cast iron pipes and specials of all classes without earth work, true to line and level including conveying carefully to site, rolling and lowering into trenches and perfect linking of joints etc., wherever necessary. (RDW&S SR 2019-20 Chapter No. 10 Item No: 10.11.1).
84
-
4368
... More
Supply and delivery at site CIDE pipes ISI marked (horizontal CIUDF) of different sizes as per ISI 181/ 1986 with latest amendments if any, the flange should be drilled as per IS 1538/ 1976, the pipes should bear ISI marking on them.. (RDW&S SR 2019-20 Chapter No. 15 Item No: 15.48 & 15.48.5). 1.00 meter length, 80mm dia
24
-
28800
... More
Cutting of road surface for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the following classification. (RDW&S CIRCLE MYS SR 2019-20 Pg.No. 12 It.No.2.26). Cutting in Cement concrete road surface.
205.22
-
226973.32
... More
Providing & fixing copper lightning arrester with five spikes and 20mm dia copper tube or suitable length of aluminium strip of spike 25mmx3mm including grounding as per specification. The aluminium strip is to be encased in G.I. conduct pipe or 40mm dia., 6.8 M long suitably joined by collar with all specials, fixed to one of the columns etc., complete up to 6 M staging. (RDW&S MYS Circle, SR 2019-20, P.No - 40, I.No - 4.72)
2
-
19290
... More
Providing and fixing M.S. Hand railing for Balcony with 50mm dia. M.S. hollow pipe of 14 gauge, welded to 20mmx20mm M.S square rod placed vertically, spaced at 100mm at regular intervals of 600mm. These vertical rods laterally tied to 3 horizontal rods spaced at equal interval. These assembly is fixed to concrete by using expansion bolts and welding the same to reinforcement bars and making good the surface. All the joints and sections hould be cut to length, welded and grinded wherever necessary etc., complete . The work includes cost of all materials, labour charges for all items of work, hire charges for welding, cutting and grinding equipment, and electricity charges, etc., complete as per specification and drawing. (RDW&S SR 2019-20 Chapter No. 6 Item No: 6.22),
144
-
408960
... More
Providing and laying Reinforced cement concrete of mix design of M-25 Grade with cement @ 340 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.7 cum and fine aggregates @ 0.47 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete for R. rafts, raft ring-beam, column footing, columns below ground level (exclusive cost of steel and fabrication charges) (RDW&S MYS Circle, SR 2019-20, P.No - 34, I.No - 4.51) 9.00m staging
9.486
-
164904.62
... More
Earth work excavation for water Supply & Sanitary lines, Electrical conduits either in pits or pipe line trenches (upto 600mm Trench width) as per drawing and technical specification, including setting out, construction of shoring, strutting, barricading, danger lighting, bracing, using sight rails & boning rods at every 100 mm whoever necessary removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench, including backfilling the excavated earth to the extent required and utilising the remaining available excavated earth locally for the work. in the following strata classifications by Mechanical Means [RDW&S SR 2019-20 Chapter No: 2 Item No: 2.23.1] Mechanical Means the rate including with all leads, lifts,loading,unloading,cost and convience of all materails, labour,equipments etc.,complete as per the direction of the engineer of the work.
1865.7
-
242541
... More
Providing and fixing M.S. ladder between landing 45 cms. wide using angle iron of following size and 20 mm M.S. bars at 25cms. centre to centre with necessary supports of same angle iron as directed including hand railing on both sides with 25mm dia G.I. pipes with angle iron props at 2 mtrs, interval and 0.5 mtr, height including fixing in ground with C.C. 1:2:4 and two coats of nonpoisonous anticorrosive bituminous paint with all lead and lift etc., complete. 65x65x8mm angle iron frame. (RDW&S MYS Circle, SR 2019-20, P.No - 38, I.No - 4.62)
13
-
23673
... More
Providing and fixing M.S. ladder between landing 45 cms. wide using angle iron of following size and 20 mm M.S. bars at 25cms. centre to centre with necessary supports of same angle iron as directed including hand railing on both sides with 25mm dia G.I. pipes with angle iron props at 2 mtrs, interval and 0.5 mtr, height including fixing in ground with C.C. 1:2:4 and two coats of nonpoisonous anticorrosive bituminous paint with all lead and lift etc., complete. 65x65x8mm angle iron frame. (RDW&S MYS Circle, SR 2019-20, P.No - 38, I.No - 4.62)
12
-
21852
... More
Providing & fixing copper lightning arrester with five spikes and 20mm dia copper tube or suitable length of aluminium strip of spike 25mmx3mm including grounding as per specification. The aluminium strip is to be encased in G.I. conduct pipe or 40mm dia., 6.8 M long suitably joined by collar with all specials, fixed to one of the columns etc., complete up to 6 M staging. (RDW&S MYS Circle, SR 2019-20, P.No - 40, I.No - 4.72). for every additional running meter
3
-
2094
... More
Providing and constructing load bearing wall with solid concrete blocks having block density not less than 1800kg/m3 having a minimum average compressive strength of 5.00 N/mm2 confirming to IS 2185 (Part 1):2005 and constructed with CM 1:4, as per IS 2572:2005 including cost of all materials labour charges, scaffolding, curing, hire charges of machineries etc., complete as per specifications with solid concrete blocks of size 400x150x200mm. (RDW&S SR 2019-20 Chapter No: 5 Item No: 5.07.2).
16.2
-
12910.59
... More
Providing and laying Reinforced cement concrete of mix design of M-25 Grade with cement @ 340 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.7 cum and fine aggregates @ 0.47 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete for R. rafts, raft ring-beam, column footing, columns below ground level (exclusive cost of steel and fabrication charges) (RDW&S MYS Circle, SR 2019-20, P.No - 34, I.No - 4.51) 7.50m staging
56.919
-
979519.07
... More
Providing and fixing enameled gauge plate 3 mm thick, 0.23 M wide with plastic float thick plastic indicator and flexible nylon wire etc., complete to 2.50 M height. (RDW&S MYS Circle, SR 2019-20, P.No - 39, I.No - 4.67). for 2.75 m height
6
-
20292
... More
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including for OHT & reservoier, cost of materials, labour, HOM of machinery complete as per specifications. (RDW&S MYS Circle, SR 2019-20, P.No - 38, I.No - 4.59) FE550
12.275
-
1036040.69
... More
Labour charges for fixing puddle flanges in position of RCC including (80mm to 200mm). (RDW&S SR 2019-20 Chapter No: 4 Item No: 4.68).
8
-
3648
... More
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including for OHT & reservoier, cost of materials, labour, HOM of machinery complete as per specifications. TMT bars Fe 500. (RDW&S CIRCLE MYS SR 2019-20 Pg.No.38 It.No.4.59.1).
311.04
-
26049.6
... More
Cutting of cement concrete road surface for pipeline trenches with steel or without steel up to 300mm with and upto 200mm depth with neat finishing vertically as well as horizontally by using concret cutting machine it includes minimum two longitude groove andnsufficient number of other postion of cement concrete road and disposing off the excavated stuff as directed including cost of cutting machinery along with generator and fule for running machine and all type of labour, including cutting blade , watering for smoothing cutting barricating, danger lighting etc.. as per standard specification. (Approved Rate as per SE, Mysore Circle 2020-21/1089, Dated on 09.11.2020).
24171
-
3988215
... More
HH CONNECTION Earthwork excavation for pipeline trenches including depositing on bank upto a lead of 50 mtrs and depth up to 2.00 mtrs. Including shoring and strutting, danger lighting and using sight rails and boning rods at every 100 mtrs. Wherever necessary as directed in the following strata. (Manual Means) [RDW&S SR 2019-20 Chapter No: 2 Item No: 2.22.1 & 2.22.2] the rate including with all leads, lifts,loading,unloading,cost and convience of all materails, labour,equipments etc.,complete as per the direction of the engineer of the work.
954.99
-
250207.38
... More
Supply and delivery of Resilient seated soft sealing Sluice Valves with body, bonnet of Ductile Iron of grade GGG50, wedge fully rubber lined with EPDM and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face dimensions as per BS 5163-89/IS 14846-2000/ DIN 3202 F4/F5. The stem sealing should be with Toroidal sealing rings (minimum 2 'O' rings). All the valves should be with electrostatic powder coating both inside and outside with pocket less body passage. The valves shall be supplied with suitable size galvanized bolts and nuts of required numbers as per relevant IS. (RDW&S CIRCLE MYS SR 2019-20 Pg.No.334 It.No.15.107). For scour /Sluice valve 50.00 mm dia .
60
-
348600
... More
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standard procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including , testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing)Upto 110mm dia,Coils shall be used. [RDW&S SR 2019-20 Chapter No: 10 Item No: 10.20.2- a, b, c, d] the rate including with all leads, lifts,loading,unloading,cost and convience of all materails, labour,equipments etc.,complete as per the direction of the engineer of the work. 63mm.
42852
-
5570760
... More
Providing 12mm thick cement plaster in single coat with cement mortar 1:3, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. (RDW&S SR 2019-20 Chapter No: 9 Item No: 9.05).
138.867
-
29300.94
... More
Providing different dia Medium class 90” double flanged bend confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete.. (RDW&S SR 2019-20 Chapter No. 15 Item No: 15.61). 80mm dia
4
-
2000
... More
Supply and delivery at site CIDE pipes ISI marked (horizontal CIUDF) of different sizes as per ISI 181/ 1986 with latest amendments if any, the flange should be drilled as per IS 1538/ 1976, the pipes should bear ISI marking on them.. (RDW&S SR 2019-20 Chapter No. 15 Item No: 15.48 & 15.48.5). 2.75 meter length, 80mm dia
16
-
44800
... More
Providing and constructing inforamatory name board of size 1.75x 1.75m with burnt brick masonry in CM 1:6 with non modular bricks of standard size of class designation 50 (Table Moulded). The foundation shall be provided with cement concrete M7.5 for a depth of 10cm and with size sTe masonry with CM 1:6 and coping concrete with cement concrete M10 as indicated in the drawing. The name board shall be provided with 12mm thick plaster in CM 1:6 in the both sides including rounding of cornors. The name board shall be provided with painting with 2 coats of enamel paint. The board shall be fixed as per the drawing and at the place indicated by the engineering charge of the work. The cost includes excavation, cost of all materials, centering, transportation charges, fixing charges labours HOM etc. the work shall be carried as per detailed specifications drawings and direction of the engineer incharge of work.. (PWD SR 2018-2019, It no. 37.62).
12
-
82800
... More
Providing 2 coats of snowcem / Water-proof cement paint of approved colour and shade over one coat of primer including curing etc.,complete for RCC over head tank. (RDW&S MYSCircle, SR 2019-20, P.No - 39, I.No - 4.70).
209.614
-
44647.78
... More
Providing and laying Reinforced cement concrete of mix design of M-30 Grade with cement @ 360 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @0.46 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete as per design and specification for staging, columns and braces above ground level (exclusive of cost of steel and fabrication charges) (RDW&S MYS Circle, SR 2019-20, P.No - 32, I.No - 4.48). 7.50m staging
15.585
-
177591.08
... More
Earthwork excavation for pipeline trenches including depositing on bank upto a lead of 50 mtrs and depth up to 2.00 mtrs. Including shoring and strutting, danger lighting and using sight rails and boning rods at every 100 mtrs. Wherever necessary as directed in the following strata. (Manual Means) [RDW&S SR 2019-20 Chapter No: 2 Item No: 2.22.3] Manual means the rate including with all leads, lifts,loading,unloading,cost and convience of all materails, labour,equipments etc.,complete as per the direction of the engineer of the work. in ordinary rock without blasting.
262.952
-
155667.58
... More
Providing and laying Reinforced cement concrete of mix design of M-25 Grade with cement @ 340 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.7 cum and fine aggregates @ 0.47 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete for R. rafts, raft ring-beam, column footing, columns below ground level (exclusive cost of steel and fabrication charges) (RDW&S MYS Circle, SR 2019-20, P.No - 36, I.No - 4.55) 7.50m staging
36
-
507024
... More
Providing and constructing load bearing wall with solid concrete blocks having block density not less than 1800kg/m3 having a minimum average compressive strength of 5.00 N/mm2 confirming to IS 2185 (Part 1):2005 and constructed with CM 1:4, as per IS 2572:2005 including cost of all materials labour charges, scaffolding, curing, hire charges of machineries etc., complete as per specifications with solid concrete blocks of size 400x150x200mm. (RDW&S SR 2019-20 Chapter No: 5 Item No: 5.07.2).
8.1
-
6455.3
... More
Providing and laying Reinforced cement concrete of mix design of M-30 Grade with cement @ 360 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @0.46 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., completeas per design and specifications etc., complete for top rib and top dome or top slab (exclusive cost of steel and fabrication charges) (RDW&S MYS Circle, SR 2019-20, P.No - 36, I.No - 4.56) 9.00m staging
6.574
-
94520.97
... More
Providing and laying Reinforced cement concrete of mix design of M-30 Grade with cement @ 360 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @0.46 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., completeas per design and specifications etc., complete for top rib and top dome or top slab (exclusive cost of steel and fabrication charges) (RDW&S MYS Circle, SR 2019-20, P.No - 36, I.No - 4.56) 7.50m staging
13.147
-
186726.84
... More
25000 lit OHT of 7.50 mt Staging New OHT: Earth work in excavation of foundation of structures upto 3 m depth by Mechanical means as per drawing and technical specification, including setting out, providing shoring, strutting and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, filling back the excavated earth to the extent required and utilising / transporting the remaining earth upto 1.00km lead, including cost of labour, materials and HOM of machineries, etc., complete. (RDW&S MYS Circle, SR 2019-20, P.No - 9, I.No - 2.09). Ordinary/Hard soil
120.182
-
6249.46
... More
Providing and constructing RCC hexagonal ventilator finial for RCC over head tank the finial to be constructed with CC (M-20) proportion using 20mm and down size jelly with reinforcement using 6mm dia., M.S. rods 4 nos., for each of the pillars both ways for full width of doom at 12cm c/c, the ventilator to be of 0.45 M x 0.5 M size provided with 25mm x 25mm x 5mm M.S. frame welded with diamond mesh to its full width and depth fully covered with aluminium mosquito mesh finished smooth with CM 1:3 proportion to required shape and size and ornamental finish including two coats of anti-corrosive paint for frame and mesh and two coats of cement paint matching to over head tank etc., complete. (RDW&S MYS Circle, SR 2019-20, P.No - 39, I.No - 4.65)
2
-
11400
... More
Providing 80 mm dia Bell mouthed pipes (flanged) confirming to IS 1538 (Part-I toXXII) 1978 with latest amendments if any cost of all materials, labour charges etc.complete.. (RDW&S SR 2019-20 Chapter No. 15 Item No: 15.57). ii 80mm CI All flanged Tee IS 1538 (Part XXIV)
2
-
640
... More
Providing & fixing copper lightning arrester with five spikes and 20mm dia copper tube or suitable length of aluminium strip of spike 25mmx3mm including grounding as per specification. The aluminium strip is to be encased in G.I. conduct pipe or 40mm dia., 6.8 M long suitably joined by collar with all specials, fixed to one of the columns etc., complete up to 6 M staging. (RDW&S MYS Circle, SR 2019-20, P.No - 40, I.No - 4.72)
2
-
19290
... More
Providing & fixing copper lightning arrester with five spikes and 20mm dia copper tube or suitable length of aluminium strip of spike 25mmx3mm including grounding as per specification. The aluminium strip is to be encased in G.I. conduct pipe or 40mm dia., 6.8 M long suitably joined by collar with all specials, fixed to one of the columns etc., complete up to 6 M staging. (RDW&S MYS Circle, SR 2019-20, P.No - 40, I.No - 4.72)
1
-
9645
... More
Providing and fixing 60x60cms M.S. inspection door with necessary M.S. frame made out of M.S. angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, painting etc., complete (for RCC over head tank and G.L.S.R.) (RDW&S MYS Circle, SR 2019-20, P.No - 39, I.No - 4.66)
1
-
1818
... More
Supply and delivery at site CIDE pipes ISI marked (horizontal CIUDF) of different sizes as per ISI 181/ 1986 with latest amendments if any, the flange should be drilled as per IS 1538/ 1976, the pipes should bear ISI marking on them.. (RDW&S SR 2019-20 Chapter No. 15 Item No: 15.48 & 15.48.5). 1.00 meter length, 80mm dia
4
-
4800
... More
Approved make Electro fusion saddle comply with BS EN 12201 - 3:2011, PN – 12.5 rating and food grade raw material as per BS 6920 for effect on water Quality intended for human consumption. Material of construction: PE 80 or PE 100 and colour of fitting – Blue/Black for water applications, EF tapping saddle is V- Regulated type.Designed to fuse at a fusion voltage of 40 volt AC. EF tapping saddle shall have moulded SS/Brass metal female threaded outlet.EF tapping Saddle is fused by using a top loading pillar type pressure exerting 1500N (150 kilograms approx.) top load on EF Saddle. Fusion time is 170 secs and cooling time is 10mins, Exerted pressure should be removed after completing the 10 mins cooling time. 63x20,75x20,90x20,110x20,140x20. (Approved Rate as per SE, Mysore Circle 2020-21/1297, Dated on 07.12.2020).
1179
-
486927
... More
Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239-II, 1991 with latest amendments if any. (RDW&S CIRCLE MYS SR 2019-20 Pg.No. 322 It.No.15.73). 15 mm dia GI elbow.
4716
-
179208
... More
Providing and laying in position plain cement concrete of mix M20 with OPC cement @ 300kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.43cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation,plinth and cills, including cost of all materials, labour, HOM of machinery, curing complete as per specifications. (RDW&S CIRCLE MYS SR 2019-20 Pg.No. 22 It.No.4.03).
288.7
-
1707949.2
... More
Labour charges for hoisting C.I. flanged pipes 2.75mtrs length in position aligning the plumb and jointing for RCC over head tank 80mm to 200mm. (RDW&S SR 2019-20 Chapter No: 4 Item No: 4.69).
20
-
12320
... More
Labour charges for fixing puddle flanges in position of RCC including (80mm to 200mm). (RDW&S SR 2019-20 Chapter No: 4 Item No: 4.68).
8
-
3648
... More
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour, with all lead & lift including encasing the pipe alround to a depth of not less than 15cms with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing). 90 mm 6 Kg. /Sqm PVC Pipes (KUWS&DB SR, Page No 22 Item No 7(6)). 90mm dia PVC Pipe with top cap For Valve Sleeve.
54
-
9774
... More
Providing 12mm thick cement plaster in single coat with cement mortar 1:3, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. (RDW&S SR 2019-20 Chapter No: 9 Item No: 9.05).
394.028
-
83139.91
... More
Providing and fixing 60x60cms M.S. inspection door with necessary M.S. frame made out of M.S. angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, painting etc., complete (for RCC over head tank and G.L.S.R.) (RDW&S MYS Circle, SR 2019-20, P.No - 39, I.No - 4.66)
2
-
3636
... More
Flow control Valve 10 LPM : Providing, & fixing Flow control valve using food grade materials SS 316 ball / 1/2 " [15mm] including cost of all materials, labour charges, HOM and testing complete as per of following specification. The FCV nominal design is for 10Ltr/Min. Discharges at 0.5 bar pressure loss and should not exceed the flow the range of 7 Lit /Min at 1 bar or more pressure. MOC of valve - Food grade stainless steel SS-316. MOC of Ball stainless steel-316. Flow direction arrow embossed on its outside surface. The Valve should act as flow control valve and non- return valve. Minimum operating pressure- 0.1 kgf( 10 cm head). Designed pressure: 1 meter to 50 meters. Accuracy of valves: + 20% of average flow rate. Orifice size: not be less than 12mm. Ball size: not less than 12 mm. Weight of FCV: not less than 125 gms .Length: not be less than 70 mm.The FCV is with internal arrangements of very simple passage in line such that the valve will pass the small floating particles if any entered in the valve to avoid choking. The FCV shall be got tested from FCRI by the manufacturer as per above standards, The quantum of checking to be done from FCRI is attached herewith. The FCV should be fitted on Saddle, which is fixed on distribution pipeline. Approved Rate as per SE, Mysore Circle 2020-21/1297, Dated on 07.12.2020).
1179
-
300645
... More
Providing and fixing enameled gauge plate 3 mm thick, 0.23 M wide with plastic float thick plastic indicator and flexible nylon wire etc., complete to 2.50 M height. (RDW&S MYS Circle, SR 2019-20, P.No - 39, I.No - 4.67). for 2.75 m height
2
-
6764
... More
Providing and laying Reinforced cement concrete of mix design of M-25 Grade with cement @ 340 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.7 cum and fine aggregates @ 0.47 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete for R. rafts, raft ring-beam, column footing, columns below ground level (exclusive cost of steel and fabrication charges) (RDW&S MYS Circle, SR 2019-20, P.No - 30, I.No - 4.43)
55.995
-
416658.8
... More
Painting two coats on new concrete surface :Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces, with materials, labour complete as per specifications. MORTH Specification No 803 (RDW&S CIRCLE MYS SR 2019-20 Pg.No.330 It.No.15.103).
1295.974
-
106269.87
... More
Providing and laying Reinforced cement concrete of mix design of M-30 Grade with cement @ 360 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @0.46 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete as per design and specification and giving satisfactory water proof test including construction joints wherever necessary as per the directions of the departmental Officers complete for ring beam, side walls, bottom dome or bottom slab, shell portion and bottom ribs (exclusive of cost of steel and fabrication charges and jointing materials) (RDW&S MYS Circle, SR 2019-20, P.No - 34, I.No - 4.52) 9.00m staging
15.761
-
275864.78
... More
Providing and fixing 60x60cms M.S. inspection door with necessary M.S. frame made out of M.S. angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, painting etc., complete (for RCC over head tank and G.L.S.R.) (RDW&S MYS Circle, SR 2019-20, P.No - 39, I.No - 4.66)
6
-
10908
... More
Providing & fixing copper lightning arrester with five spikes and 20mm dia copper tube or suitable length of aluminium strip of spike 25mmx3mm including grounding as per specification. The aluminium strip is to be encased in G.I. conduct pipe or 40mm dia., 6.8 M long suitably joined by collar with all specials, fixed to one of the columns etc., complete up to 6 M staging. (RDW&S MYS Circle, SR 2019-20, P.No - 40, I.No - 4.72). for every additional running meter
9
-
6282
... More
Providing and laying in position plain cement concrete of grade M 10 with OPC cement @ 220kgs, with 40mm and down size graded granite metal coarse aggregates @0.892cum and fine aggregtes @ 0.465cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation including cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification (RDW&S MYS Circle, SR 2019-20, P.No - 30, I.No - 4.42)
9.101
-
50838.19
... More
Supply and fixing of HDPE water meter box to protect the water meter of class 'B: multijet type of size 15 to 32mm including HDPE box with base dia 300mmxlid dia 200mmxheight 250mm with openable lid and the cover is buried below GL with lid flush with GL including earthwork excavation for 600mmx600mm and base sand filling for 100mm thick over which the cover is placed and enclosed by PCC 1:2:4 using 12 to 20mm BG jelly for an height of 150mm and refilling with excavated earth for balance 100mm height,disposal of excess earth with all lead and lifts etc complete as per drawing enclosed [RDW&S SR- 2019-20 MYS Circle, Pg No- 338 It No.-15.113]. HDPE water meter box.
1179
-
589500
... More
Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an angle of 70 degrees to horizontal including necessary 25mm dia., G.I. shutters with necessary G.I. fasteners for bracing the ladders to the Tank walls to prevent buckling of the ladder with necessary (M-15) bed for embedding the ladder bottom complete. (RDW&S MYS Circle, SR 2019-20, P.No -38, I.No - 4.63)
6.2
-
19213.8
... More
10000 lit OHT of 7.50 mt Staging New OHT: Earth work in excavation of foundation of structures upto 3 m depth by Mechanical means as per drawing and technical specification, including setting out, providing shoring, strutting and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, filling back the excavated earth to the extent required and utilising / transporting the remaining earth upto 1.00km lead, including cost of labour, materials and HOM of machineries, etc., complete. (RDW&S MYS Circle, SR 2019-20, P.No - 9, I.No - 2.09). Ordinary/Hard soil
303.398
-
15776.7
... More
Providing 12mm thick cement plaster in single coat with cement mortar 1:3, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. (RDW&S SR 2019-20 Chapter No: 9 Item No: 9.05).
308.33
-
65057.63
... More
Valve Chambers : Providing and laying in position reinforced cement concrete of Design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.460 cum, with super plasticisers @ 3 liters confirming to IS 9103-1999 reafirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick,vibrated for all works in foundation for footings, pedestals, retaining walls, return walls, walls (any thickness ) including attached pilasters, columns pillars, posts, struts, buttresses, bed blocks, anchor blocks & plinths etc., including cost of all materials, labour, HOM of machinery, curing, complete but excluding cost of reinforcement as per specifications.. (RDW&S SR 2019-20 Chapter No: 4 Item No: 4.08),
0.648
-
4072.68
... More
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including for OHT & reservoier, cost of materials, labour, HOM of machinery complete as per specifications. TMT bars Fe 500. (RDW&S CIRCLE MYS SR 2019-20 Pg.No.38 It.No.4.59.1).
51.84
-
4341.6
... More
Labour charges for hoisting C.I. flanged pipes 2.75mtrs length in position aligning the plumb and jointing for RCC over head tank 80mm to 200mm. (RDW&S SR 2019-20 Chapter No: 4 Item No: 4.69).
36
-
22176
... More
Providing and laying Reinforced cement concrete of mix design of M-30 Grade with cement @ 360 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @0.46 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete as per design and specification and giving satisfactory water proof test including construction joints wherever necessary as per the directions of the departmental Officers complete for ring beam, side walls, bottom dome or bottom slab, shell portion and bottom ribs (exclusive of cost of steel and fabrication charges and jointing materials) (RDW&S MYS Circle, SR 2019-20, P.No - 34, I.No - 4.52) 7.50m staging
31.523
-
546230.54
... More
Providing different dia Medium class 90” double flanged bend confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete.. (RDW&S SR 2019-20 Chapter No. 15 Item No: 15.61). 80mm dia
24
-
12000
... More
Providing 2 coats of snowcem / Water-proof cement paint of approved colour and shade over one coat of primer including curing etc.,complete for RCC over head tank. (RDW&S MYSCircle, SR 2019-20, P.No - 39, I.No - 4.70).
782.801
-
166736.61
... More
Providing and laying Reinforced cement concrete of mix design of M-25 Grade with cement @ 340 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.7 cum and fine aggregates @ 0.47 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete for R. rafts, raft ring-beam, column footing, columns below ground level (exclusive cost of steel and fabrication charges) (RDW&S MYS Circle, SR 2019-20, P.No - 36, I.No - 4.55) 9.00m staging
6
-
85554
... More
KSRRB M800-10. Painting new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade complete as per specifications (ii) English and Roman-Hyphen and the like not to be measured and paid for "MORTH Specification No 801.
3200
-
2240
... More
Providing and laying Reinforced cement concrete of mix design of M-25 Grade with cement @ 340 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.7 cum and fine aggregates @ 0.47 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete for R. rafts, raft ring-beam, column footing, columns below ground level (exclusive cost of steel and fabrication charges) (RDW&S MYS Circle, SR 2019-20, P.No - 32, I.No - 4.47). 7.50m staging
33.57
-
374775.48
... More
Providing and laying Reinforced cement concrete of mix design of M-30 Grade with cement @ 360 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @0.46 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete for R. rafts, raft ring-beam, column footing, columns below ground level (exclusive cost of steel and fabrication charges) (RDW&S MYS Circle, SR 2019-20, P.No - 30, I.No - 4.44)
42.037
-
350462.47
... More
Providing 80 mm dia Bell mouthed pipes (flanged) confirming to IS 1538 (Part-I toXXII) 1978 with latest amendments if any cost of all materials, labour charges etc.complete.. (RDW&S SR 2019-20 Chapter No. 15 Item No: 15.57). ii 80mm CI All flanged Tee IS 1538 (Part XXIV)
2
-
640
... More
Providing and constructing RCC hexagonal ventilator finial for RCC over head tank the finial to be constructed with CC (M-20) proportion using 20mm and down size jelly with reinforcement using 6mm dia., M.S. rods 4 nos., for each of the pillars both ways for full width of doom at 12cm c/c, the ventilator to be of 0.45 M x 0.5 M size provided with 25mm x 25mm x 5mm M.S. frame welded with diamond mesh to its full width and depth fully covered with aluminium mosquito mesh finished smooth with CM 1:3 proportion to required shape and size and ornamental finish including two coats of anti-corrosive paint for frame and mesh and two coats of cement paint matching to over head tank etc., complete. (RDW&S MYS Circle, SR 2019-20, P.No - 39, I.No - 4.65)
1
-
5700
... More
Providing 80 mm dia Bell mouthed pipes (flanged) confirming to IS 1538 (Part-I toXXII) 1978 with latest amendments if any cost of all materials, labour charges etc.complete.. (RDW&S SR 2019-20 Chapter No. 15 Item No: 15.57). ii 80mm CI All flanged Tee IS 1538 (Part XXIV)
1
-
320
... More
Providing and laying Reinforced cement concrete of mix design of M-25 Grade with cement @ 340 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.7 cum and fine aggregates @ 0.47 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete for R. rafts, raft ring-beam, column footing, columns below ground level (exclusive cost of steel and fabrication charges) (RDW&S MYS Circle, SR 2019-20, P.No - 30, I.No - 4.43)
9.332
-
69439.41
... More
Providing and laying in position plain cement concrete of mix M20 with OPC cement @ 300kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.43cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation,plinth and cills, including cost of all materials, labour, HOM of machinery, curing complete as per specifications. (RDW&S CIRCLE MYS SR 2019-20 Pg.No. 22 It.No.4.03).
1087.72
-
6434951.52
... More
KSRRB M800-10. Painting new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade complete as per specifications (ii) English and Roman-Hyphen and the like not to be measured and paid for "MORTH Specification No 801.
1600
-
1120
... More
Providing and fixing M.S. ladder between landing 45 cms. wide using angle iron of following size and 20 mm M.S. bars at 25cms. centre to centre with necessary supports of same angle iron as directed including hand railing on both sides with 25mm dia G.I. pipes with angle iron props at 2 mtrs, interval and 0.5 mtr, height including fixing in ground with C.C. 1:2:4 and two coats of nonpoisonous anticorrosive bituminous paint with all lead and lift etc., complete. 65x65x8mm angle iron frame. (RDW&S MYS Circle, SR 2019-20, P.No - 38, I.No - 4.62)
24
-
43704
... More
Providing and laying in position plain cement concrete of grade M 10 with OPC cement @ 220kgs, with 40mm and down size graded granite metal coarse aggregates @0.892cum and fine aggregtes @ 0.465cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation including cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification (RDW&S MYS Circle, SR 2019-20, P.No - 30, I.No - 4.42)
3.829
-
21388.79
... More
KSRB13-6.1 Providing and fixing in position brass bib cock of approved quality nominal bore including cost of all materials, labour and HOM with all leads complete as per specifications. Specification No.KBS 13.2.2/13.3 (PWP&IWTD CIRCLE HSN SR 2018-19 Pg.No.93 It.No. 13.23). 15mm Brass bib cock.
1179
-
224010
... More
Labour charges for fixing puddle flanges in position of RCC including (80mm to 200mm). (RDW&S SR 2019-20 Chapter No: 4 Item No: 4.68).
24
-
10944
... More
PP Make Female Threaded Elbow with SS304/ Brass/Plastic inserts suitable for a Pressure Rating PN16 (FTE 90 deg ) 20x15mm (�inch)(market rate). 20x 20 mm dia elbow. Approved Rate as per SE, Mysore Circle 2020-21/1297, Dated on 07.12.2020).
4716
-
471600
... More
KSRRB M800-10. Painting new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade complete as per specifications (ii) English and Roman-Hyphen and the like not to be measured and paid for "MORTH Specification No 801.
9600
-
6720
... More
Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an angle of 70 degrees to horizontal including necessary 25mm dia., G.I. shutters with necessary G.I. fasteners for bracing the ladders to the Tank walls to prevent buckling of the ladder with necessary (M-15) bed for embedding the ladder bottom complete. (RDW&S MYS Circle, SR 2019-20, P.No -38, I.No - 4.63)
3.1
-
9606.9
... More
Providing different dia Medium class 90” double flanged bend confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete.. (RDW&S SR 2019-20 Chapter No. 15 Item No: 15.61). 80mm dia
8
-
4000
... More
Mechanical water meters of 15 mm sizes shall be magnetically coupled, MultiJet, Class-B, inferetial type, dry dial, IP 68 peotection, totalizers enclosed in metallic housing suitable against antifraud atempts, scrwwed ends. Thw body of the meter shall be of either Brass or Brinze: The lower case of hte meter shall be painted with thermal painting externally: Water meter shall coform to ISO 4064/ IS779 standard with MID approval and marking. MID product certificate and FCRI Life cycle test certificate: Wter meters shall be provided with strainers; The maximum permissible error in the metering accuracy, when determining as per IS 6784: 1984 foe multi jet meter shall be +/- 2%; the acceptable flow parameters required to measure low fows accurately as per ISO 4064:2005, and including conveying and fixing of necessary G.I specials etc. complete, with all lead and lift. (KUWS&DB B'LORE SR 2018-19 Pg.No.42 It No.25). 15mm dia.
1179
-
1940634
... More
Supply and delivery of Resilient seated soft sealing Sluice Valves with body, bonnet of Ductile Iron of grade GGG50, wedge fully rubber lined with EPDM and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face dimensions as per BS 5163-89/IS 14846-2000/ DIN 3202 F4/F5. The stem sealing should be with Toroidal sealing rings (minimum 2 'O' rings). All the valves should be with electrostatic powder coating both inside and outside with pocket less body passage. The valves shall be supplied with suitable size galvanized bolts and nuts of required numbers as per relevant IS. [RDW&S SR 2019-20 Chapter No. 15 Item No: 15.107] 80mm PN 16
3
-
25656
... More
Cutting of road surface for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the following classification. (RDW&S CIRCLE MYS SR 2019-20 Pg.No. 12 It.No.2.26). Cutting in Aspalt road surface.
8.61
-
4666.62
... More
Providing and fixing enameled gauge plate 3 mm thick, 0.23 M wide with plastic float thick plastic indicator and flexible nylon wire etc., complete to 2.50 M height. (RDW&S MYS Circle, SR 2019-20, P.No - 39, I.No - 4.67). for 2.75 m height
1
-
3382
... More
Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an angle of 70 degrees to horizontal including necessary 25mm dia., G.I. shutters with necessary G.I. fasteners for bracing the ladders to the Tank walls to prevent buckling of the ladder with necessary (M-15) bed for embedding the ladder bottom complete. (RDW&S MYS Circle, SR 2019-20, P.No -38, I.No - 4.63)
2
-
6198
... More
Supply and delivery at site CIDE pipes ISI marked (horizontal CIUDF) of different sizes as per ISI 181/ 1986 with latest amendments if any, the flange should be drilled as per IS 1538/ 1976, the pipes should bear ISI marking on them.. (RDW&S SR 2019-20 Chapter No. 15 Item No: 15.48 & 15.48.5). 2.75 meter length, 80mm dia
84
-
235200
... More
Providing and laying Reinforced cement concrete of mix design of M-30 Grade with cement @ 360 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @0.46 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete for R. rafts, raft ring-beam, column footing, columns below ground level (exclusive cost of steel and fabrication charges) (RDW&S MYS Circle, SR 2019-20, P.No - 30, I.No - 4.44)
21.019
-
175235.4
... More
Providing & fixing copper lightning arrester with five spikes and 20mm dia copper tube or suitable length of aluminium strip of spike 25mmx3mm including grounding as per specification. The aluminium strip is to be encased in G.I. conduct pipe or 40mm dia., 6.8 M long suitably joined by collar with all specials, fixed to one of the columns etc., complete up to 6 M staging. (RDW&S MYS Circle, SR 2019-20, P.No - 40, I.No - 4.72). for every additional running meter
3
-
2094
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
NA