Rural Water Supply And Sanitation Department Tender
... More
The RWSS has issued a formal invitation for competitive bids for the Rural Water Supply And Sanitation Department project, for Package Chikmagalur -02 : Providing Fhtc's To 907 Households In Devagondanahalli Habitation Of Devagondanahalli Village, Chikmagalur Taluk And Chikmagalur District Through Svs To Devagondanahalli Village In Chikmagalur District(55 Lpcd) in Chikkamagaluru, Karnataka, with an estimated contract value of Rs. 1,32,29,283. The bid opening date for this tender is 16-02-2021 and the last date for bid submission is 24-02-2021. Interested bidders for Rural Water Supply And Sanitation Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Rural Water Supply And Sanitation Department - RWSS Tender
Opening Date16 Feb 2021
Closing Date24 Feb 2021
Tender Amount₹ 1,32,29,283
Costs
EMD
₹ 1,89,191Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
RWSSD/2020-21/WS/WORK_INDENT29063/CALL-3Bid Award Id
ViewTender No
RWSSD/2020-21/WS/WORK_INDENT29063/CALL-3Tender Authority
Rural Water Supply And Sanitation Department ViewPurchaser Address
-Website
http://eproc.karnataka.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
DEVAGONDANAHALLI Earthwork excavation for pipeline trenches including depositing on bank upto a lead of 50 mtrs and depth up to 2.00 mtrs. Including shoring and strutting, danger lighting and using sight rails and boning rods at every 100 mtrs. Wherever necessary as directed in the following strata. (Manual Means)
854.64
-
235111.46
... More
Providing different dia Medium class 90” double flanged 21 bend confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. 100mm
1
-
600
... More
Providing and laying Reinforced cement concrete of mix design of M-30 Grade with cement @ 360 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @0.46 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete as per design and specification for staging, columns and braces above ground level (exclusive of cost of steel and fabrication charges)
20.32
-
249268.49
... More
Providing and fixing enameled gauge plate 3 mm thick, 0.23 M wide with plastic float thick plastic indicator and flexible nylon wire etc., complete to 2.50 M height.
1
-
3551.1
... More
Supply and delivery of Woltman model with removal mechanism water meters confirming to ISO4064 partI,II,III class B or IS779 and IS 2373 with life cycle test certificate from FCRI/NABL accredited lab. The water meters shall have magnetic drivers or mechanical drivers and shall bevers atile for installation in any position. The meters shall be hydrodynamically, hydrostatically balanced. The runner, runner chamber, pointer of the meter shall be as per ISO4064c lass B specification. Dry dial excavated counter housing fully protected against flooding ensuring easy reading in all climates. 80mm
3
-
58353
... More
Approved make electro fusion saddle comply with BSEN 12201-3:2011. PN-12.5 rating and food grade raw mateialas per BS 6920 for effect on water qualityintended for human consumpution material of conmstrcution: PE 80 or PE 100 and color of fitting-Blue or Black for water applications, EF taping Saddleis V-Regualted type designed to fuse at a fusion voltage of 40 VAC. EF tapping saddel shall have molded SS/Brass metal female threaded outlet. EF tapping saddle is fused by using a top loading pillar type pressure exerting 1500N (150kilograms approx.) top load on EF Saddle. Fusion time is 170 secs and cooling time is 10 mins, Exerted pressure should be removed after completing the 10 mins cooling time. 63x20,75x20,90x20,110x20, 140x20 ( 63 mm dia )
907
-
393320.55
... More
Providing and constructing stand post of size 1.22mx1.22m for public fountains with RCC post of size 1.22mx0.38mx0.10m with to prounded and RCC kerb slabs of size 1.22mx0.30mx0.05m in CC1:2:4 with 12mm size granite, trapor basalt jelly with nominal reinforcement as per design, plastering with CM1:420mm thick to the exposed faces, with potrest slab of size0.45mx0.30mx0.20m in CC1:2:4 with central dipand CC platform 1:2:4 10cm thick and smooth finishing with CM 1:3 to exposed faces with necessary formwork, cantering, mixing, curing as per specifications including cost of steel and necessary earthwork excavation and disposing of the excavated earth as directed with all leads and lifts etc.
2
-
8345.4
... More
Providing and constructing RCC hexagonal ventilator finial for RCC over head tank the finial to be constructed with CC (M-20) proportion using 20mm and down size jelly with reinforcement using 6mm dia., M.S. rods 4 nos., for each of the pillars both ways for full width of doom at 12cm c/c, the ventilator to be of 0.45 M x 0.5 M size provided with 25mm x 25mm x 5mm M.S. frame welded with diamond mesh to its full width and depth fully covered with aluminium mosquito mesh finished smooth with CM 1:3 proportion to required shape and size and ornamental finish including two coats of anti-corrosive paint for frame and mesh and two coats of cement paint matching to over head tank etc., complete.
1
-
6032.25
... More
Providing 2 coats of Snowcem/Water-proof cement paint of approved colour and shade over one coat of primer including curing etc., complete for RCC over head tank.
426.58
-
95404.62
... More
Providing different dia Medium class 90” double flanged 21 bend confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. 150mm
2
-
2400
... More
KSRB13-8: Providing and fixing to wall, ceiling and floor, medium density polyethylene pipes 6.00kgs/sq.cm working pressure of outside diameter with special flange, compression type fittings,wall clips, making good the wall, ceiling and floor including cost of all materials, labour charges, HOM and testing complete as per specifications.Specification No.KBS 13.2.15.1 I 13.9 for internal water supply connection
5442
-
611408.7
... More
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standard procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including , testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing)Upto 110mm dia,Coils shall be used. 110mm
478
-
137664
... More
Valve Chamber Supplying and fixing of fixed height surface boxH-4057MD-KU with PP 40% GF Lid housing of PA+locking clip of PP with notched bolt M12x130 hexagon hrad A2-70 for service connection valves design derived from DIN 4057 should be supplied with support tile ( FSL, FSS , SI) should br able to recieve class AA traffic loads
61
-
175176.75
... More
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standard procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including , testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing)Upto 110mm dia,Coils shall be used. 125mm
31
-
11098
... More
Supply and delivery at site CIDE pipes ISI marked (horizontal CIUDF) of different sizes as per ISI 181/ 1986 with latest amendments if any, the flange should be drilled as per IS 1538/ 1976, the pipes should bear ISI marking on them. 1 meter length, 100mm dia
1
-
1489
... More
Providing and fixing 60x60cms M.S. inspection door with necessary M.S. frame made out of M.S. angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, painting etc., complete (for RCC over head tank and G.L.S.R.)
1
-
1908.9
... More
Supply and delivery at site CIDE pipes ISI marked (horizontal CIUDF) of different sizes as per ISI 181/ 1986 with latest amendments if any, the flange should be drilled as per IS 1538/ 1976, the pipes should bear ISI marking on them. 1 meter length, 80mm dia
1
-
1200
... More
Cutting of road surface for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the following classification (cutting in cement concrete road surface)
296.56
-
344395.13
... More
Supply and fixing of HDPE water meter box to protect the water meter of class 'B: multijet type of size 15 to 32 mm including HDPE box with base dia 300mm x liddia 200mm x height 250mm with openable lid and the cover is buried below GL with lid flush with GL including earth work excavation for 600mm x 600mm and base sand filling for 100mm thick over which the cover is placed and enclosed by PCC1:2:4 using 12 to 20mm BG jelly for an height of 150mm and refilling with excavate dearth for balance 100mm height, disposal of excess earth with all lead and lift set ccomplete.
907
-
476175
... More
Laying cast iron pipes and specials of all classes without earth work, true to line and level including conveying carefully to site, rolling and lowering into trenches and perfect linking of joints etc., wherever necessary 150mm
21
-
1631.7
... More
Labour charges for making, fixing and testing of flanged joints for Cast Iron pipes / D.I. Pipes and specials with rubber insertion and necessary bolts and nuts and giving necessary hydraulic pressure test including conveying, loading and unloading the jointing materials etc., complete. 80MM DIA
55
-
4562.25
... More
KSRB13-6.12: Providing and fixing in position brass bib cock of approved quality 20mm normal bore inculding cost of all materials, labour and HOM of equipments with all leads complete as per specifications. 15 mm dia nominal Bore
907
-
180946.5
... More
Laying cast iron pipes and specials of all classes without earth work, true to line and level including conveying carefully to site, rolling and lowering into trenches and perfect linking of joints etc., wherever necessary 100mm
12
-
680.4
... More
Labour charges for making, fixing and testing of flanged joints for Cast Iron pipes / D.I. Pipes and specials with rubber insertion and necessary bolts and nuts and giving necessary hydraulic pressure test including conveying, loading and unloading the jointing materials etc., complete. 100MM DIA
6
-
522.9
... More
Supply and delivery of Woltman model with removal mechanism water meters confirming to ISO4064 partI,II,III class B or IS779 and IS 2373 with life cycle test certificate from FCRI/NABL accredited lab. The water meters shall have magnetic drivers or mechanical drivers and shall bevers atile for installation in any position. The meters shall be hydrodynamically, hydrostatically balanced. The runner, runner chamber, pointer of the meter shall be as per ISO4064c lass B specification. Dry dial excavated counter housing fully protected against flooding ensuring easy reading in all climates. 100mm
1
-
25531
... More
Refilling the basement and pipeline trenches with selected vailable earth from trench excavation including watering, Consolidation in layers of 15cm thick including disposing of the surplus earth with all lead & lifts. (Compacting with vibro roller) Note:Add Rs. 203.00 / cum for earth obtained from borrow pits.
979.56
-
105939.41
... More
Providing 80 mm dia Bell mouthed pipes (flanged) confirming to IS 1538 (Part-I toXXII) 1978 with latest amendments if any cost of all materials, labour charges etc.complete.
1
-
320
... More
Providing and fixing Flow control valve using food grde materials SS 316 ball/1/2" [15mm] including cost of all materials, labour charges, HOM and testing complete as per of following specification. The FCV nominal design is for 5ltr/Min Discharge at 0.5 bar pressure loss andshould not exceed the flow at range of 7ltr/Min at 1 bar or more pressure.MOC of valve : Food grade stainless steel SS -316MOC of valve : stainless steel SS -316 flow direction arrow embossed on its outside surface, the valve should act as flow control valve and non-return valve. minimum operating pressure-0.1kg (10cmhead). designed pressure 1mtr to 50mtr. accuracy of valves+20% of average flow rate. orifice size:not less than 12mm. ball size:not less than12mm. weight of FCV : not less than 125 gms. length : not less than 70 cm . The FCV is with internal arrangements of very simple passage in line such that the valve will pass the small flaoting particle if any entered in the valve to vaoid choking. The FCV shall be got tested from FCRI by the man facturer as per the above standards, the quantum of checking to be done from FCRI is the atatched. The FCV should be fitted on saddle which is fixed on distribution line - Approved rate
907
-
242849.25
... More
Providing different dia Medium class 90” double flanged 21 bend confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. 80mm
1
-
500
... More
Earth work excavation for water Supply & Sanitary lines, Electrical conduits either in pits or pipe line trenches (upto 600mm Trench width) as per drawing and technical specification, including setting out, construction of shoring, strutting, barricading, danger lighting, bracing, using sight rails & boning rods at every 100 mm whoever necessary removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench, including backfilling the excavated earth to the extent required and utilising the remaining available excavated earth locally for the work. in the following strata classifications by Mechanical Means
3040.2
-
414987.3
... More
Providing and laying Reinforced cement concrete of mix design of M-30 Grade with cement @ 360 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @0.46 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., completeas per design and specifications etc., complete for top rib and top dome or top slab (exclusive cost of steel and fabrication charges)
9.13
-
136674.73
... More
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standard procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including , testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing)Upto 110mm dia,Coils shall be used. 75mm
1107
-
179334
... More
Supplying and fixing multi jet class B inferential type, AMR compatable water meter with IP68 protection to talizer confirming to IS779 with latest amendment of following size to service connections including conveying and fixing of necessary G.I> specials etc. completed with all lead and lift et KUWS SR 2019-20, Item No. 678
907
-
1584529
... More
Cement concrete pavement. Construction of unreinforced plain cement concrete pavement, thickness as per design, over a prepared subbase with OPC cement or any other type as per clause 1051.2.2 design mix M20/M30, with 25mm and down size graded granite metal coarse aggregates and fine aggregtes, with super plastisiser @3 lts confirming to IS9103-1999 Reaffirmed-2008, mixed in a concrete mixer of not less than 0.6cum capacity and appropriate weigh batcher as per approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work as per drawing). Spreading the concrete with shovels, rackers compacted using needle, screed and plate vibrator and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints including groove cutting charges, joint filler, separation membrane, selant primer,joint sealant, admixtures as approved, curing compound, finishing to lines and grades as per drawing complete as per specifications with OPC at 360Kg/cum, and coarse aggregate at 0.69cum fine aggregates 0.46cum For CC Road
81.63
-
420072.06
... More
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and/or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including for OHT & reservoir, cost of materials, labour, HOM of machinery complete as per specifications TMT bars Fe 500
0.18
-
13377.8
... More
Providing and laying in position reinforced cement concrete of Design mix M20 with OPC cement @320kgs, with 20mm and down size graded granite metal coars eaggregates @0.69 cum and fine aggregtes@ 0.460cum, with super plasticisers @3 liters confirming to IS9103-1999 reafirmed-2008 , machine mixed, concrete laid in layers not exceeding 15cms thick, vibrated for all works in foundation for footings, pedestals, retaining walls, return walls, walls (anythickness) including attached pilasters, columns pillars, posts, struts, buttresses, bedblocks, anchorblocks & plinths etc., including cost of all materials, labour, HOM of machinery, curing, complete but excluding cost of reinforcement as per specifications. 80 - 200 mm for Flow Meter Raft and Cover Slab
2.7
-
16305.3
... More
Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments 50mm
44
-
52360
... More
Supply and delivery at site wrought middle steel (galvanized) 15 mm dia GI elbow confirming to IS 1239- II, 1991 with latest amendments if any 63mm dia
1814
-
68932
... More
Supply and delivery at site wrought middle steel (galvanized) 15 mm dia GI elbow confirming to IS 1239- II, 1991 with latest amendments if any 63mm dia
907
-
58955
... More
Providing and fixing M.S. Hand railing for Balcony with 50mm dia. M.S. hollow pipe of 14 gauge, welded to 20mmx20mm M.S square rod placed vertically, spaced at 100mm at regular intervals of 600mm. These vertical rods laterally tied to 3 horizontal rods spaced at equal interval. 23 These assembly is fixed to concrete by using expansion bolts and welding the same to reinforcement bars and making good the surface. All the joints and sections hould be cut to length, welded and grinded wherever necessary etc., complete . The work includes cost of all materials, labour charges for all items of work, hire charges for welding, cutting and grinding equipment, and electricity charges, etc., complete as per specification and drawing .
38.4
-
114508.8
... More
Supply and delivery at site CIDE pipes ISI marked (horizontal CIUDF) of different sizes as per ISI 181/ 1986 with latest amendments if any, the flange should be drilled as per IS 1538/ 1976, the pipes should bear ISI marking on them. 2.75 meter length, 150mm dia
7
-
34475
... More
Supply and delivery at site wrought middle steel (galvanized) 15 mm dia GI elbow confirming to IS 1239- II, 1991 with latest amendments if any 63mm dia
907
-
36280
... More
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including for OHT & reservoier, cost of materials, labour, HOM of machinery complete as per specifications TMT bars Fe 550
11.17
-
837661.2
... More
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standard procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including , testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing)Upto 110mm dia,Coils shall be used. 90mm
913
-
191730
... More
Providing 12mm thick cement plaster in single coat with cement mortar 1:3, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.
426.58
-
94956.71
... More
Providing & fixing copper lightning arrester with five spikes and 20mm dia copper tube or suitable length of aluminium 22 strip of spike 25mmx3mm including grounding as per specification. The aluminium strip is to be encased in G.I. conduct pipe or 40mm dia., 6.8 M long suitably joined by collar with all specials, fixed to one of the columns etc., complete up to 6 M staging.
1
-
10127.25
... More
Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments 80mm
7
-
11550
... More
KSRB13-6.2.1 Providing and fixing in position brasss top cock of approved quality 15mm normal bore inculding cost of all materials, labour and HOM of equipments with all leads complete as per specifications.
907
-
134281.35
... More
Refilling the basement and pipeline trenches with selected available earth from trench excavation including watering, Consolidation in layers of 15cm thick including disposing of the surplus earth with all lead&lifts. (Compacting with vibro roller) Note: Add Rs. 203.00 / cum for earth obtained from borrow pits.
854.64
-
92429.32
... More
Supply and delivery at site CIDE pipes ISI marked (horizontal CIUDF) of different sizes as per ISI 181/ 1986 with latest amendments if any, the flange should be drilled as per IS 1538/ 1976, the pipes should bear ISI marking on them. 2.75 meter length, 80mm dia
3
-
8400
... More
Supplying, laying, jointing, testing and commissioning of G.I.Pipes conforming to IS 1239 : 1990 with latest amendments, including fixing Collars, Elbows, Tees, bends, GladCocks and other Fittings (Excluding Cost of Specials) with Cut sand Threads wherever necessary including conveying the materials to workspot, including testing for water tightness with all lead and lifts etc complete Class-B (MEDIUM) 15mm For Vertical
1360.5
-
180674.4
... More
Laying cast iron pipes and specials of all classes without earth work, true to line and level including conveying carefully to site, rolling and lowering into trenches and perfect linking of joints etc., wherever necessary 80mm
9
-
491.4
... More
Providing and laying Reinforced cement concrete of mix design of M-30 Grade with cement @ 360 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @0.46 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete for R. rafts, raft ring-beam, column footing, columns below ground level (exclusive cost of steel and fabrication charges)
38.83
-
327313.6
... More
Providing Sluice valve/scour valve confirming to IS 1538(Part-1 to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete 100mm dia
6
-
22800
... More
Providing and laying Reinforced cement concrete of mix design of M-30 Grade with cement @ 360 kg, 20mm and graded granite or trap or basalt jelly of approved quality @ 0.69 cum and fine aggregates @0.46 cum, super plasticiser @ 3lts confirming to IS-9103-1999 reaffirmed 2008 in layers of not more than 15 cms thick, well consolidated including centering, formwork, vibrating, curing, smooth finishing to the required plumb and face in C.M.1:3 proportion wherever necessary etc., complete as per design and specification and giving satisfactory water proof test including construction joints wherever necessary as per the directions of the departmental Officers complete for ring beam, side walls, bottom dome or bottom slab, shell portion and bottom ribs (exclusive of cost of steel and fabrication charges and jointing materials)
33.27
-
607493.57
... More
Labour charges for hoisting C.I. flanged pipes 2. length in position aligning the plumb and jointing over head tank 80mm to 200mm
18
-
11642.4
... More
Supply and delivery at site wrought middle steel (galvanized) 15 mm dia GI elbow confirming to IS 1239- II, 1991 with latest amendments if any 63mm dia
3628
-
199540
... More
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standard procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including , testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing)Upto 110mm dia,Coils shall be used. 140mm
41
-
18491
... More
Road Restoration Cement concrete pavement. Construction of unreinforced plain cement concrete pavement, thickness as per design, over a prepared sub base with OPC cement or any other type as per clause 1051.2.2 design mix M20/M30, with 25mm and down size graded granite metal coarse aggregates and fine aggregtes, with super plastisiser @3 lts confirming to IS 9103 -1999 Reaffirmed 2008, mixedina concrete mixer of not less than 0.6cum capacity and appropriate weigh batcher as per approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates in cluding levelling the formwork as per drawing). Spreading the concret with shovels, rackers compacted using needle, screed and plate vibrator and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints in cluding groove cutting charges, joint filler, separation membrane, selant primer, joint sealant, admixtures as approved, curing compound,finishing to lines and grades as per drawing complete as per specifications with OPC at 360Kg/cum, and coarse aggregate at 0.69cum fine aggregates 0.46cum
296.56
-
1526112.59
... More
Labour charges for fixing puddle flanges in position of RCC including (80mm to 200mm)
4
-
1957.2
... More
Providing and constructing load bearing wall with solid concrete blocks having block density not less than 1800kg/m3 having a minimum average compressive strength of 5.00N/mm2 confirming to IS 2185 (Part1): 2005 and constructed with CM 1:4, as per IS 2572 : 2005 including cost of all materials labour charges, scaffolding, curing, hirecharges of machineries etc., complete as per specifications with solid concrete blocks of size 400x150x200mm
11.76
-
11261.38
... More
Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments 65mm
4
-
5420
... More
Supplying, laying, jointing, testing and commissioning of G.I.Pipes conforming to IS 1239 : 1990 with latest amendments, including fixing Collars, Elbows, Tees, bends, GladCocks and other Fittings (Excluding Cost of Specials) with Cut sand Threads wherever necessary including conveying the materials to workspot, including testing for water tightness with all lead and lifts etc complete Class-B (MEDIUM) 32mm For Vertical
907
-
267610.35
... More
Supply and delivery at site CIDE pipes ISI marked (horizontal CIUDF) of different sizes as per ISI 181/ 1986 with latest amendments if any, the flange should be drilled as per IS 1538/ 1976, the pipes should bear ISI marking on them. 1 meter length, 150mm dia
2
-
3400
... More
KSRRB M800-10. Painting new letter and figures of any shade with synthetic enamel paint black or any other 17 approved colour to give an even shade complete as per specifications (ii) English and Roman-Hyphen and the like not to be measured and paid for "MORTH Specification No 801
1600
-
848
... More
Earth work in excavation of foundation of structures upto 3 m depth as per drawing and technical specification, including setting out, providing shoring,strutting and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, filling back the excavated earth to the extent required and utilising / transporting the remaining earth upto 1.00km lead, including cost of labour, materials and HOM of machineries, etc., complete.
202.72
-
11068.51
... More
Supply and delivery at site CIDE pipes ISI marked (horizontal CIUDF) of different sizes as per ISI 181/ 1986 with latest amendments if any, the flange should be drilled as per IS 1538/ 1976, the pipes should bear ISI marking on them. 2.75 meter length, 100mm dia
4
-
13428
... More
Providing and fixing M.S. ladder between landing 45 cms. wide using angle iron of following size and 20 mm M.S. bars at 25cms. centre to centre with necessary supports of same angle iron as directed including hand railing on both sides with 25mm dia G.I. pipes with angle iron props at 2 mtrs, interval and 0.5 mtr, height including fixing in ground with C.C. 1:2:4 and two coats of nonpoisonous anticorrosive bituminous paint with alllead and lift etc., complete. 65x65x8mm angle iron frame.
14
-
26768.7
... More
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standard procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including , testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing)Upto 110mm dia,Coils shall be used. 63mm
8763
-
1139190
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Kolar, Karnataka