Directorate Of Municipal Administration Tender

Code05 - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 (Common SR 2023-24,volume-3(P.N.-17.N-3.6)

code01 - Earth work in surface excavation by mechanical means for lowering and levelingthe ground without blasting for all works other than foundation in OrdinarySoft rock and depth not exceeding 300mm as per drawing and technicalspecifications, including setting out, shoring, strutting, barricading, cautionlights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5m including cost of labour, tools, usage of machinery and other appurte nancesrequired to complete the work In Ordinary or Soft rock upto 300 mm depth (Common SR 2023-24,volume-1(P.N-8.N-1.13)

code04 - Providing and constructing un-reinforced plain cementconcrete pavement, thickness as per design, over a preparedsub base, with 43 grade cement or any other type as perClause 1501.2.2 M30 (Grade), coarse and fine aggregatesconforming to IS:383:2016:, maximum size of coarseaggregate not exceeding 25 mm, mixed in a concrete mixerof not less than 0.2 cum capacity and appropriate weighbatcher using approved mix design, laid in approved fixedside formwork (steel channel, laying and fixing of 125 micronthick polythene film, wedges, steel plates including levellingthe formwork as per drawing), spreading the concrete withshovels, rakes, compacted using needle, screed and platevibrators and finished in continuous operation includingconstruction joints, primer, sealant, curing of concrete slabsfor 14-days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with alllead, lifts, loading & unloading charges, cost and conveyanceof all materials, labour, equipments etc., complete. as per thedirections of the Engineer-in-charge of the work.(Common SR 2023-24,volume-3(P.N.-149.N-16.28)