Directorate Of Municipal Administration Tender

code04 - Operation And maintenance of 72 Watt LED streetlight with pressure die cat aluminum hosing body with optimal heat sink for better terminal dispatch Diffuser with injection mood & is made of polycarbonate material with high transmission index delivering superior light output rated life burning Hours 50000 hour @ Lumen maintenance of 70% CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power factor 0.9 with mains current should not be greater than 0.1A to 0.7A & surge protection Min 4KV along with Over voltage /overload, short circuit/miss-wiring protection. Compactable for pole mounting outer diameter of 40mm to 50mm universal voltage driver to operates wide voltage range from 100 V to 270 V 50/60 HZ application over load & short circuit protection ensures reliable operation in spite of problem in output side compliance to IS 103222/IEC 60598, LM 79 & LM 80 adherence with RoHS UL approved MCPCB Top access street light with single screw to ensure ease of maintenance at the sight location LED light fixture with....W system power consumption. LED efficiency130 I m w at 1W & fixture efficency80Im/W with nominal CRI75. Luminaire manufacture should have in house facility accredited by NABL/CPRI & any Government certified agency & Design development facility certified by ISO 9001:2008. Housing with supplier word mark / name shall be engraved /embossing on the die cast hosing / Body part. Warranty of 5 years against any manufacturing defect working under standard electrical conditions suitable for B1/B2 roads as per IS 1944 Part I & Part II.

code03 - Operation nad maintenance of 65 Watt LED streetlight with pressure die cat aluminum hosing body with optimal heat sink for better termal disspation. Diffuser with injection moulded & is made of polycarbonate material with high transmission index delivering superior light out put rated life burning Hours 50000 hour @ Lumen maintenance of 70% CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete Luminaries IK08. Power factor 0.9 with mains current should not be greater than 0.1A to 0.7A & surge protection Min 4KV along with Over voltage /overload, short circuit/miss-wiring protection. Compactable for pole mounting outer diameter of 40mm to 50mm universal voltage driver to operates wide voltage range from 100 V to 270 V 50/60 HZ application over load & short circuit protection ensures reliable operation in spite of problem in output side compliance to IS 103222/IEC 60598, LM 79 & LM 80 adherence with RoHS UL approved MCPCB Top access street light with RoHS UL approved MCPCB top access street light with single screw to ensure ease of maintenance at the sight location LED light fixture with. W system power consumption. LED efficiency130 I m /w at 1W & fixture efficency80Im/W with nominal CRI75. Luminaries manufacturer should have in house facility accredited by NABL/CPRI & any Government certified agency & Design development facility certified by ISO 9001:2008. Housing with supplier word mark / name shall be engraved /embossing on the die cast hosing / Body part. Warranty of 5 years against any manufacturing defect working under standard electrical conditions as mentioned above should be given LED manufacturer

code01 - Operation and maintenance of light sources mentioned below as1 (a0 to (d) and (2) and cost of men and material as directed by the engineer in-charge. Here the work includes supply and replacement of all components/ materials such as lamps, chokes/ballasta, starters, condensers,igniters, side holders, wire etc., complete for the street lighting. -4 feet, 40 W fluorescent lamp fixtures consisting of 4' long, 40 W tube light as specified by IS 2418 (part I, II, III & IV, starter as per IS 2215-1968 and ballasts as per IS 1534 (part I) 1967. The ballasts shall be legibly marked for origin, type, wiring diagram, ISI certification for more details of these parts. Please refer respected clauses under Technical Bid Form D-4