Directorate Of Municipal Administration Tender

code22 - Supply and delivery at site wrought middle steel (galvanized) GI bend confirming to IS 1239-II, 1991 with latest amendments if any.As Per CSR for Water Supply & Sewerage Works 2023-24 Item No:11.8.4 Page no:130 For 50 mm dia GI BEND

code13 - Supply and delivery at site wrought middle steel (galvanized) GI hexagonal nipple confirming to IS 1239-II, 1991 with latest amendments if any. As per RDWSR 2021-22 (SOR CODE-N170D, N170E SL.No-15.3,15.4 Page No-146)

code08 - Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. RDW SR-2021-22 SOR CODE-P230B & P230C SL.No.22.2, 22.3 1x3x2.5 m2 Sqm Current SR 2021-22

code01 - Geophysical investigation of site for sinking Borewell for supplying drinking water to the Habitation eighter through the hand pump MWS PWS by vertical electrical sounding by akopting Venner or Scheumberger's method including Reconnisance survey of Geological formation Geophyical investigation of existing ground water in the vicinity indicating the its quality quantity and acceptablitiy of the users, location of site recommended Depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 meter in consolidated formation for proper seating of casing pipes depth of drilling required to cover full depth fo aquifer proposed to be tapped probable yield and other information rquired for safe drilling and harnessing including transportation of an instrument and accessories to work site, engaging technical personnal and labour required etc complete. NOTE: 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15%, b) Above 30 M - 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry Borewell towards yield test. As Per RDWSR 2021.22 SOR CODE O040A SL.No-4

code21 - Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239-II, 1991 with latest amendments if any for: As Per CSR for Water Supply & Sewerage Works 2023-24 Item No:11.7.4 Page no:155 For 32 mm dia GI elbow

code20 - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (As per PWD SR2021-22 Vol-I pg No.A60 It no.1.10):

code11 - Labour charges for Erection, Electrification and commissioning of Pump ets,including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. As per RDWSR 2021-22 (SOR CODE-P360A SL.No-38 P NO:163)

code15 - Labour charges for laying of 1.1 kv class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. In existing trench / duct. 25 sqmm to 75 sqmm … incluidng cost of all materials, labour, HOM, I & UL, curing with all leads and lifts etc. complete as per specifications & as directed by engineer-in-charge of the work. (PWD Ele SR 2019-20 P.NO. 41 I.NO. 6.5.2)

code18 - Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work. SR 2021-22 Pg No 6 Item No 1.5 V-1

code12 - Supplying of 1.1 KV LT UG cable XLPE or heat registant PVC insulated, PVC extruded inner sheathe or armoured UG LT Cable as per IS-1554 ( Part-01) or IS-7098 Part-01 armouring Strip thikness in average+5% & Resistivity 14 Ohms/Kms (Max) as per IS-3975 (PWD Ele SR 2019-20 P.NO. 40 I.NO. 6.4.2) 4 core 10 sqmm

code05 - Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete. 200mm(weight of pipe -6.233 kg) As Per RDWSR 2021-22 SOR CODE-M150N SL.No-13.6 Page No-140

code03 - Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) As Per RDWSR 2021.22 SOR CODE O010A SL.No-2 Page No-151 50 to 100 Mtr

code14 - Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete.(As per Civil SR KSRB I-2, P-7) As Per Electrical SR 2019-20 P.No-41 S.L.No-6.6.1

code09 - Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOL DOLDirect Online Starter 2) S-D- Star Delta Starter As per As Per CSR for Water Supply & Sewerage Works 2023-24 Page No:155 SL.No-13.23.1 Upto 3 HP pumps

code23 - Supply and delivery at site wrought middle steel (galvanized) GI tee confirming to IS 1239-II, 1991 with latest amendments if any. For 50 mm dia GI TEE As Per CSR for Water Supply & Sewerage Works 2023-24 Item No:11.9.4 Page no:130

code07 - Providing, supplying to work site, fixing of Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well and confirming to IS 8034 specifications, with testing of as per instructions of engineer in-charge of work and latest amendments. LUBI, V-GUARD, TEXMO, CRI Company Make Supply RDW SR-2021-22 SOR CODE-P080H SL.No.8.8 2HP 20 STAGE

code02 - Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) As Per RDWSR 2021.22 SOR CODE O010A SL.No-2 Page No-151 0 to 50 mtr

code16 - Supply and fixing of Energy Meter as per direction of engineer incharge of work. Including Fixing Space For HESCOM Energy Meter Deposit Meter cost test Report & agreements Wiring etc . Complete

code06 - Supplying of 170mm dia Borewell cap

code19 - Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete. 200mm(6 Kg/m2: 63mm(weight of pipe -0.662 kg) As Per RDWSR 2021-22 SOR CODE-M150H SL.No-13 Page No-140