Directorate Of Municipal Administration Tender

vol-2 P.No. 99, I.No. 12.11 - Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.(vol-2 P.No. 99, I.No. 12.11 of PWP & IWTD SR 2023-24)

vol-1 P.No. 9, I.No. 1.15.2 - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work.Depth exceeding 1.5 m, but not exceeding 3 m vol-1 P.No. 9, I.No. 1.15.2 of PWP & IWTD SR 2023-24

vol-1 P.No. 16, I.No. 2.4.1 - Providing and laying in position Cement Concrete for all Sub structures ofbuilding, Irrigation works, Sub structure works of bridges, Drain works &other parallel works from 0.50m to 3.50 m height. The granite/trap/basaltcrushed graded coarse aggregates and fine aggregates as per relevant ISCodes machine mixed with super plasticisers, laid in layers, well compactedusing needle vibrators, providing weep holes wherever necessary, includingall lead & lifts, cost of all materials of quality, confirming to the requirementsof relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates(vol-1 P.No. 16, I.No. 2.4.1 of PWP & IWTD SR 2023-24)

vol-2 P.No. 100, I.No. 12.15 - Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures )(vol-2 P.No. 100, I.No. 12.15 of PWP & IWTD SR 2023-24)

vol-2 P.No. 14, I.No. 6.8 - Providing Brick work with common burnt clay Non Modular bricks ofclass designation 3.5 in superstructure above plinth level in all shapes andsizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & otherincidental charges complete as per the direction of engineer incharge of work.(vol-2 P.No. 14, I.No. 6.8 of PWP & IWTD SR 2023-24)

vol-2 P.No. 105, I.No. 12.54 - Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge.(vol-2 P.No. 105, I.No. 12.54 of PWP & IWTD SR 2023-24)

vol-1 P.No. 15, I.No. 2.1.3 - Providing and laying in position Cement Concrete for levelling course forall works in foundation. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed, laid inlayers not exceeding 150 mm thickness, well compacted using plate vibrators,including all lead & lifts, cost of all materials of quality, labour, Usage charges ofmachinery, curing, and all the other appurtenances required to complete thework as per technical specifications. Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates, vol-1 P.No. 15, I.No. 2.1.3 of PWP & IWTD SR 2023-24

vol-2 P.No. 107, I.No. 12.60 - Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. (vol-2 P.No. 107, I.No. 12.60 of PWP & IWTD SR 2023-24)

P.No. 18, I.No. 2.11 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcementincluding cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying with binding wire / softannealed steel wire and other ancilary operations complete as per drawing and technical specification(P.No. 18, I.No. 2.11h of Vol-1 PWP & IWTD SR 2023-24)

vol-2 P.No. 107, I.No. 12.68.1 - Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. (vol-2 P.No. 107, I.No. 12.68.1 of PWP & IWTD SR 2023-24)