Directorate Of Municipal Administration Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 50,040Document Cost
Refer DocumentsTender Fee
₹ 530
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
DMA/2024-25/BD/WORK_INDENT33081Tender No
DMA/2024-25/BD/WORK_INDENT33081Tender Authority
Directorate Of Municipal Administration ViewPurchaser Address
-Website
http://bidplus.gem.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
8.8 - Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
234.19
382
89491.0247
... More
8.1.2 - Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
158.34
248
39304.7382
... More
8.10 - Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
Note : For dry areas, External plastering shall be 15 mm thick & Internal plastering shall be 12 mm.
For heavy rainfall areas, External plastering shall be 18 mm thick & Internal plastering shall be 15 mm. ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
35.52
217
7719.5616
... More
10.14 - Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg/m2, including pointing in white cement mixed with pigment of matching shade complete. ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
18.06
1139
20573.5908
... More
9.7.1 - Providing and fixing 10 mm thick acid and/or alkali resistant tiles of ap- proved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direc- tion of Engineer-in- Charge.
In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4
coarse sand) with Acid and alkali resistant tile ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
11.12
1283
14271.1856
... More
9.12.2 - Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.
Size of Tile 600x600 mm ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
24.7
1179
29129.945
... More
9.39 - Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
2.58
1492
3850.5726
... More
8.30 - Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
225.55
179
40423.071
... More
8.25 - Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in- cluding water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
193.86
141
27355.5846
... More
11.34A - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
105
173
18169.2
... More
12.87 - Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 81mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm x 57mm and mesh sash of size with GI reinforcement of 1.5mm thickness. Coextruded Glazing bead for fixing of Glass shall be of size 21.5mm x 9.5mm. Windows shall be provided with 5mm plain float Glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 1.8-2.0mm. Maximum possible size – 1519mm x 1519mm (The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made) ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
4.32
6747
29149.3296
... More
12.85 - Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head Glass. Wall thickness of frame shall be 2mm.Maximum possible size – 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made) ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
0.67
5890
3946.6819
... More
12.54 - Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
7.56
327
2476.2024
... More
12.55.2 - Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges. with one side prelam ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
3.78
2101
7942.536
... More
12.12 - Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
0.19
127928
24306.3314
... More
11.16.2 - Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
250
151
37852.5
... More
12.69.2 - Providing and fixing ISI marked oxidised M.S. single acting spring hinges
with necessary screws etc. - 125mm ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
15
250
3754.35
... More
12.72 - Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Bar- rel type) with necessary screws etc. complete : ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
10
84
844.6
... More
12.62 - Providing and fixing chromium plated brass handles of 100/125 mm with
necessary screws etc. complete ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
10
244
2441.1
... More
12.58 - Providing and fixing bright finished brass hanging type floor door stopper
with necessary screws, etc. complete. ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
5
123
618
... More
14.7.3 - Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm
C.P. brass pillar taps ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
1
2951
2951.98
... More
13.34 - Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
500
9
4635
... More
13.32.1 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. - 15 mm nominal dia pipes ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
25
318
7956.75
... More
13.32.2 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. - 20 mm nominal dia pipes ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
25
390
9759.25
... More
13.32.3 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. - 25 mm nominal dia pipes ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
25
491
12282.75
... More
13.48 - Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
60
299
17983.8
... More
13.59 - Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
2
226
453.2
... More
13.60 - Providing and fixing PVC (S.W.R) P Trap 10cms x 10cms with all fitting
arrangements & all necessary accessories complete ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
2
318
636.54
... More
13.12 - Providing and fixing C.P. brass bib cock of approved quality conforming
to IS:8931 ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
4
654
2616.2
... More
1.12 - Mechanical Means -
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
64.5
97
6311.325
... More
3.1 - Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work. Ref to MoRT&H : IRC - 301 ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
20.25
87
1772.8875
... More
3.7 - Compacting Original Ground - Compacting original ground supporting embankment - Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction. Ref to MoRT&H : IRC - 305.3.4 ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
30.38
108
3285.597
... More
3.6 - Construction of Subgrade and Earthen Shoulders - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2. Ref to MoRT&H : IRC - 305 ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
32.4
507
16452.396
... More
4.17 - Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory rollerto achieve the desireddensity. Ref to MoRT&H : IRC - 406 ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
30.38
2635
80074.6926
... More
6.6 - Plain Cement Pavement Quality M30 grade Concrete (RMC) with OPC & GGBS laid without Paver - Construction of un-reinforced plain cement concrete pavement using RMC M-30 grade with OPC @ 270 kg/m3 and GGBS@ 90 kg/m3 (75:25 proportion) as per approved mix design procedure and thickness as per design, over a prepared sub base. The superplastisiser confirming to IS 9103-1999 Reaffirmed-2008,Coarse aggregates and Fine aggregate confirming to IS:383-2016, transported to site, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work). Spreading the concrete with shovels, rackers and compacted using needle, suitable plate vibrator and finished in a continuous operation including provision of separation membrane and Hessian cloth finishing to lines and grades complete including cost of all materials, labour, all lead & lift, loading charges as per specification & direction of Engineer - incharge of the work. (Groove cutting shall be paid seperately) ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
30.38
6977
211967.9436
... More
1.14.1 - Mechanical Means -
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
40.5
105
4254.93
... More
2.1.3 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
16.82
6168
103757.0294
... More
2.11.h - Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. All other type of structures ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
1.26
81381
102540.4758
... More
1.9 - Manual Means -
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
32.65
273
8945.447
... More
1.8 - Manual Means -
Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
36
488
17575.92
... More
9.21.2 - Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).
Size of Tile 600x600 mm ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
26
1275
33153.64
... More
7.38 - Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
140
585
81905.6
... More
7.39.6 - Providing and fixing precoated galvanised steel sheet roofing accessories
0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Gutter (600 mm over all girth) ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
40
1106
44248.8
... More
7.39.1 - Providing and fixing precoated galvanised steel sheet roofing accessories
0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
20
464
9290.6
... More
8.30 - Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
8.64
181
1563.945408
... More
14.3.2 - Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked black solid plastic seat and lid ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
2
5979
11958.3
... More
12.16 - Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
5.67
7103
40279.1697
... More
code01 - Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars and formwork to be paid separately)M20 Design Mix Using 20 mm Nosminal size graded crushed coarse aggregates ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
5.99
10187
61025.7007
... More
code02 - Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars and formwork to be paid separately)M20 Design Mix Using 20 mm Nosminal size graded crushed coarse aggregates ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
6.35
10243
65045.2725
... More
code03 - Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork to be paid separately)-M20 Design Mix Using 20 mm Nosminal size graded crushed coarse
aggregates ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
10.93
6993
76440.7038
... More
code04 - Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead and lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork to be paid separately)M20 Design Mix Using 20 mm Nosminal size graded crushed coarse aggregates ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
0.97
7033
6822.6987
... More
code05 - Providing and laying in Reinforced cement concrete for all Basement and surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork to be paid separately)M20 Design Mix Using 20 mm Nosminal size graded crushed coarse aggregates ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
3.6
9769
35168.544
... More
code06 - Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars and formwork to be paid separately)M20 Design Mix Using 20 mm Nosminal size graded crushed coarse aggregates ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
0.64
11609
7429.8432
... More
code07 - Concealed Conduit System Supplying Heavy Gauge PVC Conduit pipe 19/20 mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipes ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 19/20 mm dia 2 mm thick ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
20
66
1320
... More
code08 - Concealed Conduit System Supplying Heavy Gauge PVC Conduit pipe 25 mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipes ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 25 mm dia 2 mm thick ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
20
78
1560
... More
code09 - Concealed conduit System, Supplying Heavy Gauge PVC Conduit Pipe 19/20mm dia 2mm thick with suitable size bends, metal/PVE junction boxes adhesive paste etc., by groove cutting in the wall and fixing by using U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run through out the conduit wherever necessary.19/20 mm dia 2 mm thick ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
20
68
1360
... More
code10 - Concealed conduit System, Supplying Heavy Gauge PVC Conduit Pipe 25mm dia 2mm thick with suitable size bends, metal/PVE junction boxes adhesive paste etc., by groove cutting in the wall and fixing by using U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run through out the conduit wherever necessary.25 mm dia 2 mm thick ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
15
79
1185
... More
code11 - Concealed conduit System, Supplying Heavy Gauge PVC Conduit Pipe 32mm dia 2.5 mm thick with Confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosure. Run with 18SWG GI fish wire wherever necessary 32 mm dia 2.5 mm thick ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
20
103
2060
... More
code12 - Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete .1-2 Way ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
9
103
927
... More
code13 - Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 4-5 Way ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
8
137
1096
... More
code14 - Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete.8 Way ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
4
219
876
... More
code15 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required Nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 2 Module ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
8
137
1096
... More
code16 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required Nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Module ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
4
175
700
... More
code17 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required Nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
4
284
1136
... More
code18 - Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A One Way Switch ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
18
102
1836
... More
code19 - Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Two Way Switch ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
4
166
664
... More
code20 - Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Three Way socket ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
4
171
684
... More
code21 - Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
4
326
1304
... More
code22 - Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
8
236
1888
... More
code23 - Point Wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC conduit / casing capping using 1100V grade, COPPER conductor flexible multi strand FRLS PVC insulated to 2X1.5 sqmm cabale confirming to the GTP with a 6 Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for Each outlet. Short point upto 3 m from tapping point to outlet via switch ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
6
269
1614
... More
code24 - Point Wiring using Copper wire with switch.Supplying and wiring adopting loop system in existing PVC conduit / casing capping using 1100V grade, COPPER conductor flexible multi strand FRLS PVC insulated to 2X1.5 sqmm cabale confirming to the GTP with a 6 Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for Each outlet. Medium point above 3m upto 6m from tapping point to outlet via switch. ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
9
379
3411
... More
code25 - Point Wiring using Copper wire with switch.Supplying and wiring adopting loop system in existing PVC conduit / casing capping using 1100V grade, COPPER conductor flexible multi strand FRLS PVC insulated to 2X1.5 sqmm cabale confirming to the GTP with a 6 Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for Each outlet. Long point above 6m up to 10m from tapping point to outlet via switch ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
4
555
2220
... More
code26 - Supplying 6A flush type socket and 6Amps flush type SP switch either surface / flush mounting in existing gang box or in a 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required. as per IS 1293 and IS 3654 6 Amps 3/5 way ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
8
147
1176
... More
code27 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694 1990 and confirming to the attached GTP -1 mm2 ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
47
19
893
... More
code28 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694 1990 and confirming to the attached GTP .1.5 mm2 ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
45
26
1170
... More
code29 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694 1990 and confirming to the attached GTP .2.5 mm2 ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
41
42
1722
... More
code30 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694 1990 and confirming to the attached GTP .4 mm2 ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
40
63
2520
... More
code31 - Supplying of .4 .feet -PVC Batten with integrated LED tube 20/22 W with high quality diffuser with Life of 25000 burning hours and 70percent lumen maintenance with CRI grater than 80. Power Input 220-240V@ 50/60Hz and Power factor grater than0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4 - 20/22 W ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
9
690
6210
... More
code32 - Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076 twin twisted PVC insulated wires, required Nos of round blocks and clA.On wall/ ceiling / Rafter / Girders ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
8
122
976
... More
code33 - Supplying and fixing of porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers etc., complete. 63 Amps ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
4
401
1604
... More
code34 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6 - 32 Amps DP ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
4
739
2956
... More
code35 - Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB s single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.16 Way SP and N ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
4
2932
11728
... More
code36 - Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [RCCB] 240/450V up to 300mA sensitivity on existing wood/panel board. 16 A- 25 Amps 2 Pole ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
2
4277
8554
... More
code37 - Fabricating supplying and mounting MS box made out 16 SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete.16 SWG (Box 50 cm X 60 cm X 30 cm) ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
5000
-
2150
... More
code38 - Supplying and fixing of retrofit type - LED bulb ...... W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRIgrater than 70percent. efficacy grater than80 lumen per W, lifegrater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 and LM 80. The LED are driven by HF electronic driver integrated in the system, with PF grater than 0.95, power loss should less than 5percent of lamp Wage., short circuit and open circuit protection to be integrated in the circuit, THD less than 20percent, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.9W, 6500K ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
4
154
616
... More
code39 - Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge ---- Etc., complete including all lead and lift as per the instruction of the officer in Charge of the work
2250.5
116
261935.695
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%