Directorate Of Municipal Administration Tender

DMA12 - Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life) (VOL-2,P.No.46, I.No. 8.33.1 of KPWD SR 2023-24)

DMA05 - Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. (VOL-2,P.No. 187, I.No. 19.2.1 of KPWD SR 2023-24)

DMA02 - Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per direction of Engineer-in-charge.(VOL-2,P.No. 193, I.No. 19.55 of KPWD SR 2023-24)

DMA04 - Demolishing brick work manually/ by mechanical means includingstacking of serviceable material and disposal of unserviceable materialto the appropriate disposal area as per direction of Engineer-in-charge.In cement mortar (VOL-2,P.No. 187, I.No. 19.7.3 of KPWD SR 2023-24)

DMA06 - Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work (VOL-2,P.No. 13, I.No. 6.4 of KPWD SR 2023-24)

DMA09 - Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm (VOL-2,P.No. 60, I.No. 9.12.2 of KPWD SR 2023-24)

DMA10 - Providing and laying in Position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregate (KPWD SR 2023-24 V-1 P.no: 15, I.no:2.1.3 )

DMA14 - Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar dropsand foreign matter including preparing the surface even and sand papersmooth, cost of materials, labour complete as per specifications and asper directions of Engineer-in-charge.(VOL-2,P.No. 48, I.No.8.40 of KPWD SR 2023-24)

DMA07 - Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement\ to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge (VOL-2,P.No. 42, I.No. 8.6.1 of KPWD SR 2023-24)

DMA08 - Providing 15 mm cement plaster on rough side of single or half brickwall finished with a floating coat of neat cement of mix 1:3 (1 cement:3 fine sand) including rounding off corners wherever required smoothrendering, providing and removing scaffolding, including cost ofmaterials, labour, curing complete as per specifications and as perdirections of Engineer-in-charge.(VOL-2,P.No. 42, I.No. 8.5.1 of KPWD SR 2023-24)

DMA01 - Polyurethane based Single Component for Existing Surface Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofing treatment to the Existing Roof surface/Chajjas/Sunken portion of WC:Bathroom applied @ 1.2 l/per m2, having tensile strength greater than 1.5N/mm2, elongation greater than 300% with solid content not less than 60% in 2 coats including surface preparation, priming the surface with water based acrylic primer @0.1 l/m2, and spreading 60 gsm geotextile between two top coats completely as per specification. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. as per the direction of the Engineer In charge.(VOL-2,P.No. 149, I.No. 15.2 of KPWD SR 2023-24)