Directorate Of Municipal Administration Tender

code01 - Operation & maintenance of light source mentioned below as (a) and cost of men and material as directed by the Engineer-in-charge. Here the work includes supply and replacement of all components/materials, such as lamps, chokes, ballasts, starters, condensers, ignitors, side holders, underground cables, wires etc., complete for the street lighting as per the specifications mentioned below including painting of poles and footings, pole numbering and preparing of master register for each ward/division, removing of buntings, posters, threads, banners from the street lighting poles, direct tapping, bio metal & all other nature of faults etc..to be attended by the contractor at his own cost only: 4 feet 1x40/2*40/CFL watts fluroscent lamp fixtures consisting of 4 ft long 36 watts tube light as specified in IS 2418 (Part I,II,III and IV) starter as per IS 2215-1968 and ballasts as per IS 1534 (Part I) 1967. The ballast shall be legibly marked for origin, Type, Wiring diagram, ISI certification. For more details of these parts please refer respective clauses of the technical specifications. Execute the work as per the Engineer in charge.

code02 - Operation & maintenance of light source mentioned below as (a) and cost of men and material as directed by the Engineer-in-charge. Here the work includes supply and replacement of all components/materials, such as lamps, chokes, ballasts, starters, condensers, ignitors, side holders, underground cables, wires etc., complete for the street lighting as per the specifications mentioned below including painting of poles and footings, pole numbering and preparing of master register for each ward/division, removing of buntings, posters, threads, banners from the street lighting poles, direct tapping, bio metal & all other nature of faults etc..to be attended by the contractor at his own cost only: 250 Watts-HPSV Lamp Fixtures should be of single piece of gravity die cast LM6 alloy, ISI marked street l;ight luminaried suitable for watt elliptical high pressure sodium lamp made by gravity die cast aluminium housing. High transparent acrylic bowl firmly held with the canopy by means of stainless steel toggles and rubber, gasket, optical contro is provided y reflectors. the control gear housing accommodates low loss heavy duty polyesters filled copper wire (for HPSV lamp) all pre wired up to the terminal block.The luminariary is painted white inside and ahmmer tone gray otside. The luminaried meet IP-65 protection and confirm to IS-10322 (part 5/Sec3) specifications. Execute the work as per the Engineer in charge.

code03 - Operation & maintenance of light source mentioned below as (a) and cost of men and material as directed by the Engineer-in-charge. Here the work includes supply and replacement of all components/materials, such as lamps, chokes, ballasts, starters, condensers, ignitors, side holders, underground cables, wires etc., complete for the street lighting as per the specifications mentioned below including painting of poles and footings, pole numbering and preparing of master register for each ward/division, removing of buntings, posters, threads, banners from the street lighting poles, direct tapping, bio metal & all other nature of faults etc..to be attended by the contractor at his own cost only: 150 Watts-HPSV Lamp Fixtures should be of single piece of gravity die cast LM6 alloy, ISI marked street l;ight luminaried suitable for watt elliptical high pressure sodium lamp made by gravity die cast aluminium housing. High transparent acrylic bowl firmly held with the canopy by means of stainless steel toggles and rubber, gasket, optical contro is provided y reflectors. the control gear housing accommodates low loss heavy duty polyesters filled copper wire (for HPSV lamp) all pre wired up to the terminal block.The luminariary is painted white inside and ahmmer tone gray otside. The luminaried meet IP-65 protection and confirm to IS-10322 (part 5/Sec3) specifications. Execute the work as per the Engineer in charge.