Directorate Of Municipal Administration Tender

Providing and finishing external walls in two coats over one coat of primer with antifungal paint of approved brand and shade to give an even shade after thoroughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specifications.

KSRB13-8.9 : Providing and fixing to wall, ceiling and floor, low density polyethylene pipes 6.00 kgf/sq.cm working pressure 110mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications. Specification No.KBS 13.2.15.1 / 13.9

Providing and fixing to the existing door frames, factory made single leaf HDF skin sandwich composite door shutter of 40 mm thickness made out of honeycomb of 34 mm thick and surrounded by good quality properly seasoned wooden reinforcements of size 33 mm X 65 mm for fixing fixtures such as tower bolts, aldrops, handles etc., and laminated on either sides with 3 mm thick wood grain finish good quality HDF skins, using structural bonding material compatible with honeycomb core, wood and HDF skin and the whole assembly is bonded together at high temperature and pressure using 650 tonnage heated compression moulding press. The HDF Composite door surface is coated with 2 coats of high quality primer.The front and back surfaces of the door shutter and all the four sides are painted with two coats of high quality paint of any desired colour. The material and process for manufacturing the door shall confirm to RV-TIFAC composites design centre standards and specification and the door shutters tested in confirmation to IS4020-1994, including cost of all materials, labour charges, HOM and machineries etc. complete but excluding the cost of fixtures.

Providing and fixing Special make glazed Vitrified tiles (Granomite finish) of approved make, quality and colour of size 600x600x10mm thick fixed on existing flooring with a special roffe adhesive for flooring and skirting etc., complete including providing spears at required interval and removing stains etc., complete.

KSRB 15-18.2 : Providing and applying enamel metal paint two coats ( excluding priming coat ) over new steel or other metal surface brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter, including cost of materials, labour, complete as per specifications.

Removing of Filter media (course type )laying of filter media in all depth as per specification in infilteration gallery works including screening and placing it under water with a lead not exceeding 200 mtrs from the stacks to the point of laying etc. complete Filter Gravel (depth 0.15M) 1st layer Size 35 to 50mmCum (quotation rate)

KSRB 15-15.1 : Providing and applying painting in two coats with plastic emulsion paint of approved brand on wall surface to give an even approved shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications. - with primer

Washing of filter media by enganging labours. (Considering 2 Cum/Day)7 No.'s x 6 days =42 man (quotation rate)

Labour charges for laying of filter media in all depth as per specification in infilteration gallery works including screening and placing it under water with a lead not exceeding 200 mtrs from the stacks to the point of laying etc. complete ) Graded granite/ Trap/basalt/Metal grom 6mm to 40mm sizeCum coursed sand passing through a sieve of 4 meshes 2.5 cms and retained on a sieve of 10 meshes to 2.5 cms and filling it under water and coursed sand passing through a sieve of 10 meshes to 2.5 cms and retained on 2o meshes to 2.5 cms and filling it under water (quotation rate)

Fabricating, providing and erecting in poiston of M S Ornamental security Grill Gate without hot dip using 75 x 12mm M S Flat for alround frame work with verticals at the centre and horizontal centere support M S Square of 20 x20 mm of different heights as shown in the drawing are to be fixed at 16 cms C/C for suqare bars of full height and at 8cms C / C for bottom rods providg ornamental C I Designers at the botom and C I arrows inthe midle and top. The entire frame work is to be fixed by means of expansion bolts to the brick pillars with necesary drillling holes. the work includes providng two coats of enamel painting over one coatr of red lead ready mix primer coat etc complete cost of all labour, painting, erection charges using hoist pulleycranes with all lead and lift, loading, transporting and unloading using hoist pulley cranes, scaffolding charges and all other incidental charges required for successful completion fo the work as per specification and drawings

KSRB 4-1.5 : Providing and laying in position plain cement concrete of mix M20 with OPC cement @ 300kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.43cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, plinth and cills, including cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification No. KBS 4.1, 4.2

Supplying and refilling of filter media of pebbles of size 15mm to 6mm including all lead and lifts and staking at site of work (quotation rate)

Supplying of filter media of fine sand of size 0.45mm to 0.75mm including all lead lift & stacking at site of work 6th layer ( MR )Cum,Supplying of filter media of fine sand of size1mm to 3mm including all lead lift & stacking at site of work 5th layer ( MR )Cum,Supplying of filter media of fine sand of size 3mm to 6mm including all lead lift & stacking at site of work 4th layer ( MR ) Only 25% qunatity is considered for relodaingCumSupplying of filter media of fine sand of size 6mm to 15mm including all lead lift & stacking at site of work 3rd layer ( MR ) Only 25% qunatity is considered for relodaingCum,Supplying of filter media of fine sand of size 15mm to 35mm including all lead lift & stacking at site of work 2nd layer ( MR ) Only 28% qunatity is considered for relodaingCum,Supplying of filter media of fine sand of size 15mm to 35mm including all lead lift & stacking at site of work 1st layer ( MR ) Only 28% qunatity is considered for reloading (quotation rate)

Providing and fixing flush door shutter made out of solid core black board type, well seasoned chemically treated hard wood battens and internal frame with minimum 45 mm wide wooden frame all-round door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door using liquid phenol formaldehyde resin as per IS specification 2202 (Part-I) 1991. From manufacturer (Factory) complete as per specification. - 30mm thick both side teak

KSRB 15-18.6 : Providing and applying black japan paint one coat (excluding priming coat ) on previously painted steel or other metal surface brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter, including cost of materials, labour, complete as per specifications.

Collecting and stacking the following filter media at the site of work with all lead & lift 6 mm, 10 mm 12 mm 20 mm 40m mm size (quotation rate)

Supplying and refilling of filter media of course sand of size 3mm to 1mm including all lead and lifts and staking at site of work (quotation rate)

KSRB 4.9.2 : Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM of machinery complete as per specifications. Specification No. KBS 4.6.3 - TMT bars Fe 500

Supplying and refilling of filter media of pebbles of size 35mm to 15mm including all lead and lifts and staking at site of work (quotation rate)