Directorate Of Municipal Administration Tender

dma16 - Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :: W.C. pan with ISI marked white solid plastic seat and lid

dma15 - Providing and supplying cupboard shutter with 19mm thick one side Architect recommended decorative laminate (1mm thick) and other side balancing lamination(preferably white) on factory pressed BWP grade marine ply as per IS 710 of approved brand complete as per direction of engineer in-charge.(Payment for providing and fixing auto closing hinges shall be paid separately)

dma09 - Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

dma17 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.

dma18 - Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge.

dma13 - Providing and fixing PTMT bib cock of approved quality and colour 15 mm nominal bore, 165 mm long, weighing not less than 110 g

dma08 - Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

dma04 - Circular swing single with FRP seat side FRP seat side frame work 2 NB Top Bar 2 1/2 NB ring Frame work 1" NB support 3/4" NB seat FRP (Area 5' x 5') (Area:1.5m*1.5m, leg support:50mm NB pipe, Top Bar 65mm NB pipe, swing frame:25mm NB pipe, inner frame:20mm NB pipe, seat:FRP seat, Bearing: heavy duty ball bearing with fitting and transportation charges.

dma03 - Junior combination set (Slide 4'ht, swing 2 ste, see saw 2str) Swinng Main frame 1 1/4 NB pipe: Handle 3/4" NB FRP seats & slide 4mm thickness (14feet x 10 ft area) (Area 3.04*3.65m, swing: 35mm NB pipe with FRP seat, slide:FRP slide, Ladder: 35mm & 25mm NB pipes with 100mm wide steps, see-saw:25mm NB pipe with FRP seats with fitting and transportation charges.

dma01 - Luxury Swing: Side frame-2" GI pipe, Height 9ft, Top Bar 3" GI pipe, Top Structure (FRP) 7 1/2ft x 7 1/2 ft. FRP sheet bending, Seat FRP, lengthy 5ft, bending 65" oval pipe with fitting and transportation charges.

dma02 - Bighook seat with chain, seat: FRP bucket seat, Chain 73" 2 no.s, 78" 2no.s, Rubber coated chain with fitting and transportation charges.

dma10 - Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

dma11 - Providing and fixing 1.5m length granite seating bench with 1no. Base slab, 1no. Back rest, 2no. Legs, made up of granite stone with nice finish chamfered edge and fillet corner finishes is conveyed to work site it is inclusive of all lead and lift, labour, transportation loading unloading charges, over heads, hire charges of machinery all and placing in position etc., complete work shall be carried out as per the detailed specification, Architect drawing and direction of the engineer in charge of the work. The work includes all other incidental works required to complete the work in all respects for smooth functioning of the equipment at all times in all respects for its intended use. The works required in fixing the equipment on site as per the site condition. The cost includes, cost of transportation, cost of labour, HOM of machinery etc., required to complete the work. As per the direction of engineer in charge.

dma07 - Providing and laying in position Ready Mixed or Batch Mixed concrete from ISO 9001 accredited plants as per IS 10262-2009 mix design procedure for Reinforce Cement Concrete works in all types of Structures other than Road works, using coarse aggregate and fine aggregate derived from natural sources, Ordinary Portland cement & GGBS, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the

dma14 - Providing and fixing PTMT stop cock of approved quality and colour 20 mm nominal bore, 89 mm long, weighing not less than 88 g No. 144.00

dma19 - Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials labour, curing complete as per specifications and as per directions of Engineerin- charge.