Directorate Of Municipal Administration Tender

012 - Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge..PWD Common DSR 2023-24 Volume 2 (P No: 41 I.No:8.1.1 )

009 - Form Work: As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate RCC Roof Slabs 50%KPWD Common DSR 2023-24 Volume 1

011 - Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work..PWD Common DSR 2023-24 Volume 2 (P No: 13 I.No:6.2 )

002 - Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirementsof relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specificationsPWD Common DSR 2023-24 Volume 1 (P No: 16 I.No:2.4 )M25 Design Mix Using 20mm nominal size

003 - Form Work: As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate Cement RCC Columns / Shaft (Slip Centering) Consider 70% KPWD Common DSR 2023-24 Volume 1 (P No: 111 SI.No : 9) RCC Columns/shaft (Slip Centring) 70%

016 - Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications.. PWD Common DSR 2023-24 Volume 2 (P No: 65 I.No:9.36 )

004 - Form Work: As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate Plinth Beam of buildings Consider 50% KPWD Common DSR 2023-24 Volume 1 (P No: 111 SI.No : 2)

005 - Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirementsof relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specificationsPWD Common DSR 2023-24 Volume 1 (P No: 16 I.No:2.5.1 )M20 Design Mix Using 20 mm nominal size

008 - Form Work: As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate Cement Chejjas, Canopy & Other Architectural Projections of minor sections 45%KPWD Common DSR 2023-24 Volume 1

013 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. PWD Common DSR 2023-24 Volume 12(P No: 41 I.No:8.2.1 )

018 - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge.PWD Common DSR 2023-24 Volume 2 (P No: 133 I.No:15.1 )

006 - Form Work: As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate Cement RCC Columns / Shaft (Slip Centering) Consider 70% KPWD Common DSR 2023-24 Volume 1

007 - Form Work: As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate Cement RCC Beams, Lintels & Troughs of Aqueducts KPWD Common DSR 2023-24 Volume 1

019 - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m PWD Common DSR 2023-24 Volume 1 (P No: 7 I.No:1.9 )

001 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregatesPWD Common DSR 2023-24 Volume 1 (P No: 15 I.No:2.1.3 )Mix 1:3:6 (M10) Using 40mm nominal size graded crushed coarse aggregates

010 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.Buildings PWD Common DSR 2023-24 Volume 1 (P No: 18 I.No:2.11 a )